FIBERSTARS Waterfall Light Bar Kit NSTALLATION MANUAL
Contents
1. gFIBERSTARS Lighting For The 21st Century Waterfall Light Bar Kit INSTALLATION MANUAL Part WLB 12 25 WLB 12 45 WLB 18 25 WLB 18 45 WLB24 25 WLB24 45 WLB36 25 WLB36 45 WLB48 25 WLB48 45 Attaches to any waterfall SHEERS fe RADIUS SHEERS RAINS RADIUS RAINS Description Waterfall Light Bar 12 wide 25 of 25 strand fiber Waterfall Light Bar 12 wide 45 of 25 strand fiber Waterfall Light Bar 18 wide 25 of 36 strand fiber Waterfall Light Bar 18 wide 45 of 36 strand fiber Waterfall Light Bar 24 wide 25 of 50 strand fiber Waterfall Light Bar 24 wide 45 of 50 strand fiber Waterfall Light Bar 36 wide 25 of 75 strand fiber Waterfall Light Bar 36 wide 45 of 75 strand fiber Waterfall Light Bar 48 wide 25 of 100 strand fiber Waterfall Light Bar 48 wide 45 of 100 strand fiber 75 15041 PM Rev A www fiberstars com For all sizes of Fiberstars Waterfall Light Bars install 3 4 PVC conduit from the left side of the fall see Fig 1 to the illuminator location b The conduit should placed so the top of the hole in the conduit is even with the bottom of the waterfall lip FIG 1 3 4 PVC Conduit The Fiberstars Waterfall Light Bar can be installed before or after the fall is installed Note Installation of light bar on radius falls before the fall is installed is recommended Making sure the bevel on the light bar track is a2. ngling away from the pool wall toward the back of the water see Fig 2 Simply 5 J attach the light bar to the fall using clear PVC cement Be careful not to obstruct the water flow with the light bar track or PVC cement Pull fiber through the conduit Rains 15 8 at the waterfall back to the illuminator location Front lip of waterfall Sheers 1 1 8 Finished tile surface FIG 2 Important On sheer falls there must be 1 1 8 between the finished tile and the front lip of the fall On Rain falls there must be 1 5 8 clearance for installation of light bar Pa 3 4 conduit ai Installation Tips 6 ji Pa i When installing multiple light bars make all fiber runs P we the same length to insure uniformity of light using the r pra 7 longest run as the guide x lt 2 PA 3 4 conduit E 36 When using multiple light bars to light waterfalls longer than 48 Install two 3 4 conduits one on each end of two waterfalls see Fig 3 Choose one of the two light bars Carefully remove the light bar from track flip the light bar so the fiber exits on the opposite side of the fall Re install the light bar in the track making sure all the fiber is securely inside the bar
Download Pdf Manuals
Related Search
FIBERSTARS Waterfall Light Bar Kit NSTALLATION MANUAL