Home

Panasonic PV-DM2799 Manual

image

Contents

1. agio etu p The unit has an FM radio with built in antenna 9 station preset and a band range t is necessary to enter TV mode by pressing DVDeTV when of 87 5 108 1 MHz You can even set the DVD mode is selected On Timer page 26 to wake up to your 1 f it di t E 1 Display FM radio mode avorite radio station 1 Press TV FM on the remote or unit Select the FM number Press a 3 8 e NUMBERED DOS NE DERE terre Y E eee 9000 y Set the radio station lt gt 1 Press CH AV to select the e desired station Trwm Each press changes ABIDET frequency 200 KHz Q 2 Press ADD DLT to set FM 1 87 5MHz MEMORY ADD OLT Quick Station Scan Hold down CH A or V for more FM d 87 5MH2 than 1 second then release to MEMOR I ZED scan for FM stations in your area To cancel press CH A or V while in search mode To Make Corrections select station with a NUMBERED key then do step 3 again To exit FM mode press TV FM on the remote or unit FM ANTENNA Setup Make sure FM tuning is done correctly See FM radio setup a Display MAIN MENU Press ACTION in FM mode Display SET UP TV screen o 1 Press AV4 to select TV T 2 Press SET to cock eer display Continued on the next page SELECT 4 4 SET SET 30 For assistance call 1 800 211 PANA 7262 Select FM ANTENNA 1 Press AY to T TEN E dem select V
2. such as vases sinks tubs etc To avoid unit maltunction and to protect against electrical shock fire or personal injury 2 IF EXPOSED TO RAIN MOISTURE OR STRONG IMPACT Keep power cord away from heating appliances unplug unit and have it inspected by a qualified service and walking traffic Do not rest heavy objects on technician before use or roll such objects over the power cord 3 ELECTRICAL STORMS Do not tamper with the cord in any way During a lightning storm or before leaving unit unused for An extension cord should have the same type extended periods of time disconnect all equipment from the piug polarized or grounding and must be power source as well as the antenna and cable system securely connected Overloaded wall outlets or extension cords is a 3 bo SON REI ERE an fire hazard liquid has spilled into unit unit was dropped or otherwise damaged unit emits smoke malodors or noises Immediately unplug unit and have it inspected by a service Frayed cords damaged plugs and damaged or cracked wire insulation are hazardous and should be replaced by a qualified electrician 4 DO NOT BLOCK VENTILATION HOLES technician to avoid potential fire and shock hazards Ventilation openings in the cabinet release heat Never drop or push any object through openings in unit generated during operation If blocked heat Touching internal parts may cause electric shock or fire hazard build up
3. CID onos LIGHT pes Display LOCK screen 1 Press AV 4 Amr y G 5 n to select Jum set aaa gt LOCK El a e E la 2 Press SET to display SELECT a v 4 gt SET SET 1 ACTION Enter your secret code 1 Press NUMBERED OO NUMBERED 3 keys ENTER 4 DIGIT CODE O O e Oo o keys 2 Enter same SELECT secret code AY4 END ACTION ENTER 0 9 again for confirmation To Make Corrections Step 2 not 2 SET Press repeatedly to move the necessary m cursor and NUMBERED keys when changing 4 to make the correction rating or secret code Display LOCK menu for rating screen Press SET and go to page 37 MOTION PICT Ratings or page 38 TV PARENTAL Ratings Or to exit press ACTION twice entering the secret code You will need your current code Do not forget your secret code Enter your secret code with using NUMBERED keys after Sd l step 2 on this page and press ADD DLT to clear current Once the rating is locked the setting cannot played back unless the correct secret code is entered For assistance call 1 800 211 PANA 7262 code Repeat steps 3 and 4 to enter new code 36 Process of V Chip Control Feature Setup Motion PICT Picture Ratings Ee a A T s Blocking If LOCK menu is not displayed do Enter Secret Code steps on page 36 Select MOTION PICT STATUS LOC MOTION PICT STATUS OFF x 1 Press AV CHAN to select A
4. Panasonic Omnivision TV DVD VCR Combination Operating Instructions PEPA LTD 1 E ME E 1 i r 1 7 1 4 E E a As an ENERGY STAR Partner Matsushita Electric Corporation of A Am nca has determined that this Erer product or product model meets Easy Taping ihe ENERGY STAR guidelines for energy elficiancy Doom EI CMS we dee Please read these instructions carefully before attempting to connect operate or adjust this product Please save this manual Spanish Quick Use Guide is included Gu a para r pida consulta en espa ol esta incluida For assistance me 1 800 211 PANHA 7262 uonelado oiseg peuejs 6umoeo uonelado pesueApy o Lass E o y la o m t A o Important Safeguards and Precautions READ AND RETAIN ALL SAFETY AND OUTDOOR ANTENNA INSTALLATION OPERATING INSTRUC DONS HEED ALE 1 SAFE ANTENNA AND CABLE CONNECTION An outside antenna or cable system must be properly grounded to provide some INSTALLATION protection against built up static WARNINGS IN THE MANUAL AND ON UNIT 1 POWER SOURCE CAUTION charges and voltage Operate only from power source indicated on unit Section 810 of the serie vaer or in this manual if uncertain have your Electric National Electrical Code Utility Service Company or Video Products Dealer ANSI NFPA 70 in roy rre ad verify your home power source Canada
5. Recording Editing TS TV DVDNCR Combination a d i i O ANT IN FROM VIDEO IN L AUDIO IN R 2 Es Recording Editing TV DVD VCR JE 4 o PAUSE S Insert pre recorded tape Put in Standby mode Press PLAY then PAUSE at starting point Start dubbing Press PAUSE Stop dubbing Press STOP EJECT Combination insert blank tape with record tab Dubbing tapes protected with Copy Guard will have poor quality results Select LINE mode See Selecting Input Mode section on page 17 Put in Standby mode Press REC then PAUSE immediately REC PAUSE Start dubbing Press PAUSE Stop dubbing Press STOP EJECT PAUSE STOP Unauthorized exchanging and or copying of copyrighted recordings may be copyright infringement Please note that some discs cannot be dubbed on this unit Also it is not possible to dub DVD Video CD CD to VHS tape using this unit For assistance call 1 800 211 PANA 7262 40 DVD Operation using On When DISPLAY is pressed On Screen Displays show disc information title chapter track number elapsed playing time audio subtitle language and angle and unit information repeat play play mode Karaoke vocal ON OFF etc DISPLAY button does not function while DVD TITLE MENU is displayed E Example of DVD m DIR i
6. Letterbox ni o m o Z ium ja 3 t o Remote Control Buttons EJECT OPEN CLOSE TVS FM See pages 16 18 64 See pages 30 31 POWER LIGHT See pages 12 14 18 See page 64 DVDoTV DISPLAY See page 18 See pages 14 15 17 27 32 39 41 a Pm CHANNEL UP 210 DT MR See pages 12 14 17 18 30 VOLUME UP DOWN See page 14 MENU COUNTER RESET ACTION See pages 18 19 32 48 See pages 12 13 17 23 CHANNEL DOWN 24 28 31 33 35 38 44 49 See pages 14 17 30 50 53 Bo SUBTITLE See pages 20 21 25 27 See page 46 ANGLE RETURN See page 47 See pages 18 42 NUMBERED KEYS pug is See pages 12 14 17 19 25 30 31 ibis 36 41 48 TRACKING UP DOWN PLAY REPEAT See page 16 See pages 16 18 19 ADD DLT 32 45 See pages 12 13 21 24 26 31 45 46 REW SLOW FF SLOW 19 See pages 16 19 See pages 16 19 SKIP ZERO 1 MINUTE SKIP STOP See pages 18 19 32 See pages 16 19 21 44 45 SKIP R TUNE See pages 14 18 19 SELECT See pages 12 13 17 18 20 21 23 31 33 AUDIO 35 38 44 53 See pages 15 31 34 46 47 O See pages 17 18 48 PAUSE See pages 16 19 SET REC See pages 12 13 17 18 20 21 23 31 33 35 38 See page 17 41 44 45 48 53 Light Tower Illuminated Remote Control LIGHT button When LIGHT is pressed DVD TV TVFM DISPLAY CH UP DOWN VOL UP DOWN ACTION or PROG buttons will light for 5 seconds f
7. 20 E nj Oy di Operation Cancel Replace Clear ich Contents i Timer Programming using MOTE VCR Plus System eee 22 Y Cable Box Setup ssseeeee VCR Plus Channel Setup d VCR Plus System Programming PS 25 TV Timer Features 26 ON TIMER with Alarm 26 SLEEP TIMER xen ust Closed Caption System EA 28 Closed Caption Mode Feature Caption On Mute Feature p FM Radio rata 30 FM Radio or FM ANTENNA Setup Using FM Radio Select Audio Mode m Before Requesting Service 54 Other Spanish Quick Use Guide 57 Information Location of Controls 64 b f Warranty eere 67 Service Center List Back Cover 4 For assistance call 1 800 211 PANA 7262 Connections 9 Outdoor Antenna Connections 9 DSS Cable box Connections iia Audio Connections NOT 10 11 One Time Setup Ni P To Replace Channels in Memory To Set or Reset the Clock Add or Delete a Channel Playback a Tape 16 Main Operation Forward or Reverse Search Still Picture Slow Motion Frame by Frame Advance Features for a Quality Picture Record On a Tape 17 Main Operation One Touch Recording Selecting Input Mode Tape Operation 32 Repeat Play Zero Search One Minute Skip Auto Operation Functions
8. Kazakh Greenlandic Cambodian Kannada Korean Kashmiri Kurdish Kirghiz Latin Lingala Laothian Lithuanian Latvian Lettish Malagasy Maori Macedonian Malayalam Mongolian Moldavian Marathi Malay Maltese Burmese Nauru Nepali Dutch Norwegian Oriya Panjabi Polish Pashto Pushto Portuguese Quechua Rhaeto Romance Romanian Russian Sanskrit Sindhi Serbo Croatian Singhalese For assistance call 1 800 211 PANA 7262 pem Slovak Slovenian Samoan Shona Somali Albanian Serbian Sundanese Swedish Swahili Tamil Ukrainian Urdu Uzbek Vietnamese Volap k Wolof Xhosa Yoruba Chinese Zulu Spanish Quick Use Guide Guia para rapida consulta Conexi n de la antena externa Desenganche la antena del televisor o de Mezclador de banda la videograbadora que tuviera Plano Cable UHF VHF no est anteriormente y con ctela a la parte bifubular de incluido trasera del registrador Combinaci n de 300 ohmios VCR TV como se muestra en el diagrama Si el sistema de su antena tiene Ado Spende dd conductores UHF y VHF separados usted s necesita un mezclador de banda UHF VHF no viene con el equipo desde la antena O a ADVERTENCIA Transtormador de 300 75 Al utilizar cables coaxiales RF del Tipo wn MS a tuerca solo debe apretarse con los dedos ohmios rid esta incluido Si se aprieta demasiado los cables pueden Plano Cable bifubular Pa x h rt r resul
9. Set the desired language 1 Press AY to a select language XXX 2 Press P or 4 a to set 3 Press A or Y to select ON or OFF To return to the normal screen Press SUB TITLE Je SELECT a 4 amp Number of subtitle language being played back Subtitles may not change to the selected language immediately When closed captioning is used along with subtitles they may overlap If so turn one function off See pages 28 and 29 If after several presses of the button the language does not change language selection is not offered on the disc When power is turned on or disc is removed subtitles revert to initial setting language If this language is not recorded on the disc the disc s priority language will appear Changing audio soundtrack language DVD only It is possible to change the audio soundtrack language to a different language from the one selected at the initial settings If available See page 51 This operation works only with discs on which multiple audio soundtrack languages are recorded Display the audio screen play mode AUDIO b Select the desired language Press AY to select desired language To return to the normal screen Press AUDIO Number bakoi the audio soundtrack language being played back 46 1 SUBTITLE AUDIO If after several presses of the button the language does not change language
10. Special VCR Features 33 Weak Signal Display ON OFF VCR Lock Audio Features 34 Select Audio Mode for Playback or Recording Speaker ON OFF System V Chip Feature enn 30 Enter Secret Code d 96 Setup Motion PICT Ratings EEEE 37 Setup TV PARENTAL Ratings 38 Blocking Message seeren OD Copy Your Tapes Dubbing 40 Picture Audio Adjustment 50 Basic DVD Operation 18 Main Operation Rapid Advance or Reverse Skip a Chapter Track Still Picture Frame by Frame Advance Slow Motion e RESUME function o rhe 19 Auto Power off function iens 19 Enjoy Video CDs only with playback control without using menus Video CD only 19 DVD Operation using On Screen Displays 41 Disc information screen For DVD 42 Disc information screen For Video CD CD 43 Disc information screen For Unit 43 Disc Operation 44 Program Play Video CD CD 44 Random Play Video CD CD adn Repeat Play 45 Changing subtitle language DVD only ee 46 Changing audio soundtrack language DVD Ornly nce starched cene rario reni tr cas 46 Viewing from another angle DVD only 47 Vocal selection for Karaoke discs DVD Video CO do con 47 Using a title menu DVD only 48 Using a DVD menu DVD o
11. To select and set the language of the audio soundtrack subtitles or title DVD menus for all discs to be played 4 Select the desired item 1 Press AV DISC LANGUAGES aw to select AUDIO English Y 2 Press SET MENUS English repeatedly SELECT SET SET for language END ACTION Refer to the right Redisplay DVD menu to continue setup Press ACTION and go to step 3 to setup another setting Or to exit press ACTION three times Once initial settings are done they remain in memory even after power off until changed This means the unit will always operate under the same conditions especially DVDs each time AUDIO selections To select the audio soundtrack language English French Spanish factory preset English Original Original disc language OTHER xx Other language selection SUB TITLE selections To select the subtitle language AUTO Same language selected for AUDIO Factory preset If language set for AUDIO is used in playback subtitles will not appear f another language is used during playback the subtitles will appear in the language selected at the setup AUDIO English French Spanish OTHER amp Other language selection MENUS selections To select the language used in title menus or DVD menus English French Spanish factory preset English OTHER xx Other language selection To enter OTHER code number Press NUMBERED
12. EXT The unit speaker s can be turned off to enjoy external audio sound Please note Make sure connected external speakers are as follows Impedance 8 Q Audio Input over 3 W Unit After confirming the right left terminals make connection correctly Connect to and to Be careful not to short the and speaker cords as this could damage the internal circuits E Unit gt Amplifier gt Speaker Do the Speaker ON OFF system steps on page 35 and select OFF Unit AUDIO OUT R L 9 Amplifier Speaker sa Speaker SA Check list before you begin L Turn down the volume then turn this unit as well as other equipment to be connected off before proceeding with connection L Do not block ventilation holes of any of the equipment and arrange them so that air can circulate freely Read through the instructions before connecting other equipment Ensure that you observe the color coding when connecting audio and video cables Enjoying digital audio output from the digital audio output connector Notes on audio output from the optical coaxial digital audio output connector Sound recording format DVD Dolby Optical coaxial digital audio output from connector Dolby Digital bitstream Digital 2 5 1 ch or PCM 2ch AC 3 48 kHz 16 bit Linear PCM Linear PCM 2ch 48 96 kHz 48 kHz sampling 16 bit 16 20 24
13. Press SET to IEA SELECT a SET SET Display VIDEO ADJUST screen 1 Press AY to select 2 Press SET to display TV CAPT ION INPUT SELECT TUNER SPEAKER SELECT a Y SET SET END ACTION Adjust desired item T 1 Press AY to select an item VIDEO ADJUST COLOR vM d hz a am ser BRIGHTNESS netos X See below right SHARPNESS Colca 2 Press d gt gt to NORMAL a SELECT a ADJUST adjust END ACTION Press AV and SET to select COLO and set NORMAL BRIGHTNESS maal All controls return to their SHARPNESS micos factory settings NORMAL EET ee LECT a SET SET EET TRAE ACTION Lo o nain setup Press ACTION three times to exit Audio Adjustment a Do steps 1 and 2 above Select AUDIO ADJUST Mm 1 Press AY to CAPT ION select INPUT SELECT TUNEAR 2 Press SET to FM ANTENNA set SPEAKER SELECT v END ACTION Do steps 4 and 5 above See description right 90 To Reset Picture Controls 1 ACTION Picture Adjustment COLOR Control Adjust color intensity TINT Control Adjust for natural flesh tones BRIGHTNESS Control Adjust picture brightness PICTURE Control Adjust picture intensity by adjusting both contrast and color level in the proper balance SHARPNESS Control Adjust picture sharpness Audio Adjustment BASS Control To adjust the intensity of low frequency sound TR
14. Use to quickly find scenes May not work with some discs Title number For DVD discs with two or more titles the title is numbered as title 1 title 2 etc Track number Numbers assigned to tracks on Video CDs and CDs to allow specific tracks to be quickly located Video CD CD containing picture and sound with same quality level as video tape This unit also supports Video CDs with playback control version 2 0 Disc handling Handling precautions Only hold disc by edges as shown Fingerprints dirt and scratches can cause skipping and distortion Do not write on label side of disc Never use record cleaning sprays benzine thinner static electricity prevention liquids or any other solvent Be careful not to drop or bend disc Do not place more than 1 disc on disc tray Do not try to close disc tray when disc is not properly placed Always store discs in their proper cases when not in use paye s Dunes Disc tray ui EN X With a soft damp water only cloth gently wipe from the center hole to the outer edge as shown below Wiping in a circular pattern will scratch the surface Disc To clean disc surface If disc is brought from a cold to a warm environment moisture may form on the disc Wipe away moisture with a soft dry lint free cloth before using disc See above Improper disc storage Discs could be damaged if stored or left in areas exposed to
15. lt Example gt Press AUDIO I gyre AP 4 MONO q at MONO AUDIO 15 Playback a Tape You can operate on the unit 1 Insert a cassette 2 Press PLAY po e oe yaya LL E C EK ERN ERR E Press to stop and or eject tape 16 For assistance call 1 800 211 PANA 7262 A check list before you begin _ All connections are made See page 9 O Your unit is plugged in Insert a cassette The unit power comes on automatically To prevent tape jam Inspect your cassette tapes and remove any loose or peeling labels PLAY REPEAT Press PLAY Playback begins if cassette has no record tab E To Find a Particular Scene Forward Search 29 Press FF Reverse Search 3 Press REW E For viewing Still Freeze picture gt Press PAUSE To release press PLAY For viewing Slow Motion gt Press SLOW increases speed or SLOW decreases speed in the still mode To release press PLAY B For viewing Frame by Frame Advance gt Press PAUSE in the still mode To release press PLAY After the unit is in Still or Slow mode for 3 minutes it will switch to Stop mode automatically to protect the tape and the video head E To stop gt Press STOP E To rewind tape gt Press REW in stop mode E To fast forward tape gt Press FF in stop mode E To eject tape gt Press EJECT on the remote or STOP EJECT on the unit Features for a Quality Picture Digital Auto T
16. part 1 of the AQUA CLAMPS 2 POWER CORD PLUG canenian Ceca Gada aneen For safety this unit has a polarized type plug one provides information WEC marominecmcacos ee wide Pee ora reo LE Brbonding NEG zd regarding proper grounding of the mast and supporting structure Alwavs hold the lug firmly and make sure your grounding of the lead in wire to an antenna discharge unit size of dae are dry SR plug ind in or un Art hn the grounding conductors location of antenna discharge unit connection AC power cord Reguiaay remove at dirt etc to grounding electrodes and requirements for the grounding electrode on the plug 2 KEEP ANTENNA CLEAR OF HIGH VOLTAGE POWER LINES OR CIRCUITS POLARIZED PLUG CAUTION i l tal Locate an outside antenna system well away from power lines and ees Ua Meilen de i ey Mrd electric light or power circuits so it will never touch these power sources electrician install the proper wall outlet Do not should it ever fall When installing antenna absolutely never touch tamper with the plug i power lines circuits or other power sources as this could be fatal ROUNDING PLUG CAUTION USING THE UNIT The plug requires a three hole grounding outlet If necessary have an electrician install the proper outlet Do not tamper with the plug Before unit is brought out of storage or moved to a new location refer again to the INSTALLATION section of these safeguards 3 POWER CORD 1 KEEP UNIT WELL AWAY FROM WATER OR MOISTURE
17. selection is not offered on the disc When power is turned on or disc is removed language reverts to initial setting If this language is not recorded on the disc the language recorded will be heard For assistance call 1 800 211 PANA 7262 Viewing from another angle DVD only DVDs may contain scenes shot from multiple camera angles allowing the same scene to be viewed at different angles For these discs the same scene can be viewed from each of these different angles using the ANGLE button Display the angle screen Press ANGLE ANGLE in play mode O Select the desired angle m Press AY to select opa Ona v To return to the normal screen Press ANGLE Number of angle being played back ANGLE lights on the unit when a scene recorded at different angles is detected The angle number can be set beforehand so that the angle is switched whenever ANGLE lights Vocal selection for Karaoke discs DVD Video CD a Display the audio screen Pm Press AUDIO in play mode Select the desired AUDIO 4 VOCAL ON setting 1 Press AV or 4 gt to select 2 Press b or 4 to set DVD only DVD Karaoke 1 vocal VOCAL ON lt gt VOCAL OFF When O appears on the screen while a button is being operated it means that the corresponding operation is prohibited by the unit or the disc ANGLE indicator EJECT GAD ouo LIGHT CD DVD Karao
18. All Playback of all DVDs is prohibited e g to prohibit playback of DVDs for adults which are not encoded with rating level information LEVEL 2 DVDs for children can be played back DVDs for adults general audiences are prohibited LEVEL 3 t0 7 DVDs for genera audiences children can be played back DVDs for adults are prohibited LEVEL 8 No Limit All DVDs can be played back Factory preset Rat ngs highlighted in RED will be blocked and those highlighted in GREEN will not be blocked Nw End setup Q Press ACTION three times OPENCLOSE LIGHT 4 ACTION 1 SELECT AY4 When DVD Lock is activated YOUR SELECTION EXCEEDS THE PLAYER S RATING LIMIT DO YOU WANT TO CHANGE THE LIMIT YES NO SELECT 4 SET END ACTION After DVD Lock is set and a blocked DVD is played this message will appear The message may differ depending on the disc To continue viewing a blocked program for now Press AV to select YES and SET Then enter your 4 digit secret code When NO is selected blocked programs cannot be viewed To change the DVD LOCK settings after entering your secret code in step 3 on page 36 select OFF to deactivate DVD Lock or chane the rating level uonelado pooueApYy Picture Adjustment Display MAIN MENU Press ACTION nm Display SET UP TV screer SET UP TV screen m 1 Press AW4 Sl S A 0 0 0 Pe t 2
19. Dynamic Range Compression selections OFF Normal audio range is selected Factory preset ON For dynamic sound even at low volume this is useful tor late night listening Dolby Digital AC 3 DVDs only V S S selections Virtual Surround Sound creates the effect of sound coming from nonexistent rear speakers even when only connected to a 2 channel stereo system Dolby Digital AC 3 DVDs only OFF No Virtual Surround Sound effect Factory preset VSS 1 Natural effect VSS 2 Emphasized effect A Redisplay DVD menu DVD menu to continue setup Press ACTION and go to step 2 to setup another setting Or to exit press ACTION three times 52 Select the digital output to be output from the optical coaxial LPCM Dolby to be connected DVD Digital as audio input connactor AV amplifier including xt Ini Dolby Digital decoder POM Bitstream OFF coaxial audio output as shown in above table menu screen Otherwise there will be no sound from the bit in addition to audio from digital audio output directly to the audio output connectors not to the digital 2 coaxial digital input connector which does not If Bitstream is selected starting DVD play may cause When a dts decoder is connected please select os Recommendable setting Type of amplifier AV amplifier with digital 21 2 2 without Dolby Digital dts PCM PCM OFF decoder AV amplifier including mm I 3 Dolby Digital dts de
20. May contain mild physical or comedic violence which may lt When V Chip Control is activated gt frignten children under 7 CH 08 e f V Chip Control is activated and a program or GENERALIS movie exceeds the ratings Contains little or no violence strong language or sexual PROGRAM RATING EXCEEDED you have set a message dialogue or situations RATING PG 13 will appear and sound is muted PARENTAL GUIDANCE May contain infrequent coarse language limited violence some AS S uN e If DISPLAY is pressed even when V Chip control is deactivated rating is PARENTS CAUTIONED displayed on screen May contain sophisticated themes sexual situations strong language and more intense violence RATING PG 13 MATURE AUDIENCE MT May contain mature themes To Continue Viewing profane language graphic a Blocked Program violence and sexual situations After entering your 4 digit secret code go to step 1 on both pages 37 and 38 and select OFF to deactivate V Chip Control TV PARENTAL GUIDE RATINGS The previous MOTION PICT Chart 2 and TV PARENTAL settings will be restored Fantasy Violence Violence gt lt e O O o O E 0 t Q 3 Sexual Situations Adult Language Sexually Suggestive Dialogue 39 opy Your Tapes Dubbing Connections you ll need to make Playing Source VCR RAUDIO L VIDEO 4
21. Repeat above iro ACTIVATED VCR LOCK VCR Lock is cancelled automatically after about 24 hours if clock is set Audio Features Select Audio Mode for Playback Select the type of sound track you desire for playback Playback the tape See the Playback a Tape section on page 16 Select desired mode Press AUDIO repeatedly each ao Press within 5 seconds Please select or HIFI R to listen to stereo recordings in stereo sound Select NORMAL for monaural sound This screen appears when you press AUDIO during playback Select Audio Mode for Recording Select the type of broadcast you wish to record Press AUDIO to select the desired audio mode See page 15 Your recording is always performed according to the audio mode you selected Do a recording See the Record On a Tape section on page 17 When purchasing or renting prerecorded tapes remember that only those recorded in Hi Fi stereo will playback with true stereo sound Standard stereo tapes will playback with monaural sound n order to listen to Hi Fi stereo playback the unit AUDIO L R jacks must be connected to a stereo amp and speakers There may be a difference in audio level between Hi Fi and normal audio playback HIFI LAY HIFI L With the proper audio mode setting your unit can record and playback MTS stereo broadcast main language in stereo Hi F
22. a few seconds 26 I check list before you begin L The clock is set to correct time PROG O C s ADD DLT O SET 3 SELECT Cave lf no button on the remote or unit including a button used to turn off the alarm is pressed within 60 minutes after ry turns itself on it will turn itself back off For assistance call 1 800 211 PANA 7262 SLEEP TIMER The unit can be set for auto power off Display PROGRAM Press PROG Set SLEEP TIMER B 1 Press AV to CR PM select SLEEP TIMER PRO MN C RO TIMER E a 2 Press SET to SELECT a SET SET move cursor POS to right 3 Press AY to select the desired time SLEEP TIMER 30 60 3 90 3 00 OE To cancel press A or V repeatedly until 00 appears a Return to normal to normal screen Press PROG Pressing PROG with sleep timer set displays remaining time gt Q lt A 5 O O Q O pe O c O 27 losed Caption System Closed Caption Mode Feature 1 Display MAIN MENU Display SET UP TV Screen press AVA oo Lees to select TV my VE 2 Press SET to euer L er display SELECT a SET SET 1 Press AY to select CAPT ION Mr 2 Press SET to eos SANT display SPEAKER ON SELECT 4 SET SET END ACTION Select CAPTION MODE 1 Press AY to 2 CAPTION a select CC ON MUTE CAP Cl T 2 Press SET repeatedly to SELECT a SET SET select ca
23. bit only or no output dts Bitstream or no output Video MPEG 1 PCM CD 44 1 kHz sampling Linear PCM Linear PCM 44 1 kHz sampling 1 The type of audio output from the connector can be selected by the DVD initial settings See page 52 2 Sound having 96 kHz sampling is converted into 48 kHz sampling when it is output from the unit s optical coaxial digital audio output connector For your reference Dolby Digital AC 3 is a digital sound compression technique developed by the Dolby Laboratories Licensing Corporation Supporting 5 1 channel surround sound as well as stereo 2 channel sound this technique enables a large quantity of sound data to be efficiently recorded on a disc Linear PCM is a signal recording format used in CDs While CDs are recorded in 44 1 kHz 16 bit DVDs are recorded in 48 kHz 16 bit up to 96 kHz 24 bit If you have a Dolby Pro Logic Surround decoder you will obtain the full benefit of Pro Logic from the same DVD movies that provide full 5 1 channel Dolby Digital soundtracks as well as from titles with the Dolby Surround mark Manufactured under license from Dolby Laboratories Dolby AC 3 Pro Logic and the double D symbol are trademarks of Dolby Laboratories Confidential Unpublished Works 1992 1997 Dolby Laboratories Inc All rights reserved 10 For assistance call 1 800 211 PANA 7262 E Unit gt Decoder with Dolb
24. canal que no sea el seleccionado para cualquier tipo de DUE elle grabaci n hacer una grabaci n con temporizador de un canal a menos que lo seleccione en el receptor DSS NOTA El receptor DSS debe estar apagado para ver programas IN IN E desde un decodificador de TV cable o desde la antena Consulte el manual del receptor DSS para m s detalles Receptor OUT DSS Tl o S c m 1 O g 3 tb c ja panish Quick Use Guide Guia para r pida consulta Para fijar el canal y reloj Pulse POWER en el control remoto o el aparato 2 a CLOCK Comience el ajuste autom tico de canales y el ajuste autom tico del CHANNEL CLOCK AUTO SET CONNECT ANTENNA CABLE ano reloj IF YOU USE A CABLE BOX M 1T TO YOUR LOCAL PBS CH Pulse CH A PLEASE PUSH CH UP KEY V Las siguientes informaciones aparecer n seguidamente CH AUTO SET PROCEEDING CH AUTO SET COMPLETED AUTO CLOCK SET PROCEEDING Ajuste terminado 2 20 Pulse CH A para salir DATE Mid DST E 121241989 FRI 12 00PM OFF Si la hora indicada y DST no son correctos vea la secci n Para fijar o fijar de nuevo el reloj SETTING CH10 AUTO CLOCK SET COMPLETED ENO CH Ajuste sin terminar AUTO CLOCK SET IS INCOMPLETE PUSH ACTION TO SET CLOCK y ajuste autom tico de canal 98 NOTA IMPORTANTE PARA AJUSTE AUTOMATICO DEL RELOJ El ajuste autom tico del reloj ser
25. first is increased with each If a single sided disc is placed in upside down additional press of the button up to 5 levels PLEASE CHECK THE TYPE OF DISCS AND For Video CDs reverse slow motion is not available STAIN OR SCRATCH OF A DISC is displayed 19 Timer Recording You can set up to 8 programs to be recorded while you are away 1 Display PROGRAM screen Press PROG Select TIMER PROGRAM m 1 Press AV OR Plus PROGRAM ooo to select 2 Press SET to SLEEP TIMER 00 7 display SELECT a Y ENO PROG ifa program is already in memory press AV and SET to select an unused program number Set the recording DATE T 1 Press AV PROG TIMER PROGRAM to select OOD MA IE CO 2 Press SET or lt q to set SET SET SELECT a END PROG 1 31 One time e DAILY MON FRI WEEKLY SUN SAT Same time once a week Example s 31 1 2 6 Today s 7 SELECTA V Selection Order DAILY Dat Ss WEEKLY WEEKLY WEEKLY SAT MON 7 SUN Repeat step 3 to set start time stop time Channel or LINE for outside source Speed SP LP SLP End the program Press PROG To Enter More Programs Press AW and SET to select and set a blank program number and then repeat steps 3 and 4 TIMER PROGRAM DATE START STOP CH SPD EN 4 9 0P 9 30 08 SP 2 i i we 3 0 0 0 4 oe ele m SELECT 18 ENTER SET END PROG CANC
26. gt Q lt 9 5 Q M Q O v 0 e Q Timer Programming using VCR Plus System continued VCR Plus Channel Setup is necessary to program the Unit with local channel information for proper VCR Plus operation VCR Plus Channel Setup At first do Channel Setup Preparation below right 1 Display MAIN MENU Press ACTION Display SET UP CH 2 4 screen 3 gt EL 0 3 0 SELECT SET SET 1 Press AV gt to select CH 2 Press SET to display Select VCR Plus CH SET UP 1 Press AV to po HE a select war compere OO 9 Press SET CY to display SELECT a SET SET EC END ACTION 1 Press SET to E move cursor to wiwe om c right column 22 2 Press AV to a change te number 3 Press SET to set 4 Press AV to scroll up down the GUIDE CH column To Make Corrections Press AV and SET to move to error then AY to change or ADD DLT to erase number D On End the setup Press ACTION three times Make each entry within 5 minutes or the unit will leave this mode Once local channels have been programmed they will stay in memory even in the case of a power failure Enter VCR Plus channel Repeat step 4 until list is complete Process of Recording Gonnection EM Programming check list before you begin Ll tt is necessary to enter TV mode by pressing DVD lt gt TV before selecting CH on the MAIN MEN
27. keys Refer to the language codes on page 56 To make corrections press l repeatedly to delete the language code number If the selected language is not offered the original disc language is selected Tl O im 1 S c 1 O m 3 tb o DVD Initial settings continued Selecting DIGITAL AUDIO OUTPUT digital audio output connector of the unit 1 Do steps 1 and 2 on page 51 Display DIGITAL 2 AUDIO OUTPUT screen OvD o 1 Press ans AY ST ILL MODE FIELD T to select SELECT a Y SET SET 2 Press END ACTION SET Select the desired item DIGITAL AUDIO OUTPUT O 1 Press AV zi to select Dolby Digital Bitstream Oramte Me Compression OFF v 2 dll SELECT 4 SET SET repea e y END ACTION for output LPCM DVD selections OFF Only linear PCM of 48 kHz 16 bit is output When playing DVDs recorded in linear PCM of 48 kHz 20 bit or 96 kHz no digital audio is output Factory preset PCM When playing DVDs recorded in linear PCM of 48 kHz 20 bit 24 bit or 96 kHz digital audio converted to 48 kHz 16 bit is output Digital output of PCM audio is restricted to 48 kHz 16 bit or below for copyright protection Dolby Digital selections Bitstream Dolby Digital AC 3 bitstream 2ch 5 1ch is output Factory preset PCM PCM 2ch of 48 kHz 16 bit is output dts selections OFF No output Factory preset Bitstream dts bitstream is output
28. la pantalla de ngulo Pulse ANGLE durante la reproducci n Seleccionar el ngulo deseado Pulse AY para seleccionar Para voler a la pantalla normal pulsar ANGLE Utilizaci n de un men de t tulos DVD solamente Algunas discos con pel culas por ejemplo vienen con dos o m s t tulos Si el disco tiene un men de t tulos grabado el bot n TITLE podr utilizarse para seleccionar el t tulo de la pelicula Pulse TITLE durante la reproducci n Ahora se visualiza una lista de tos t tulos del disco TITLE MENU Seleccionar el t tulo T deseado 1 Pulse AV AY 0 la s tecla s NUMBERED para seleccionar 2 pulse SET Birds of the world Utilizacion de un menu de DVD DVD solamente Algunos discos DVD tienen estructuras nicas de menus llamadas menus DVD por ejemplo los DVDs programados con un contenido complejo proporcionan menus gu a y los grabados con varios idiomas proporcinan menus para audio e idiomas de subtitulos Aunque los contenidos de los men s DVD y la operaci n cambian de disco a disco a continuaci n se explica la operaci n b sica cuando se utiliza esta caracter stica Pulse MENU durante la reproducci n El menu de DVD introducido en el disco se visualiza ahora DVD MENU Seleccionar el tem deseado 1 SUBTITLE gt AUDIO 1 Pulse AV AV 0 la s l tecla s NUMBERED para 3 ANGLE seleccionar 2 pulse SET Por ayuda llame al 1 800 211 PANA 7262
29. realizado al volver a encender el aparato cada vez que lo apague Si usa un decodificador de TV cable y desea que la funci n de ajuste autom tico del reloj funcione el decodificador de TV cable debe quedar encendido y sintonizando el canal PBS en el momento en que se apaga el aparato Si usa un sintonizador de TV satelital para que funcione el ajuste autom tico del reloj debe de estar apagado Si usa un toma de audio video para conectar el aparato y el decodificador de TV cable o el sintonizador de TV satelital deber tambi n conectar el cable coaxial RF para poder usar las funciones de ajuste autom tico de reloj Si por cualquier raz n se cambiara la hora manualmente no se podr realizar la correcci n autom tica de la hora Por ayuda llame al 1 800 211 PANA 7262 Caso 2 2 El ajuste del reloj es incompleto Ajuste el reloj manualmente Exhiba la pantalla A NE FIJAR RELOJ Presione ACTION para salir de este modo AUTO CLOCK SET IS INCOMPLETE PUSH ACTION TO SET CLOCK E SET CLOCK Bl A Ajuste el reloj manualmente 1 Presione AY para seleccionar el mes 2 Presione gt para ajustar SELECT v SET SET ENO ACTION De la misma manera ajuste el dia el a o la hora y la hora de ahorro de energ a DST Para hacer correcciones pulse repetidamente lt gt para moverse hasta el error luego corrijalo Finai del ajuste Pulse dos veces ACTION Para fijar o fijar de nu
30. 00 Ezell Road Suite 806 Nashville TN 37211 TEXAS 7482 Harwin Drive Houston TX 77036 13615 Welch Road Suite 101 Farmers Branch TX 75244 WASHINGTON 20425 84th Avenue South Kent WA 98032 HAWAI 99 859 Iwaiwa Street Aiea Hawaii 96701 Phone 808 488 1996 Fax 808 486 4369 Service in Puerto Rico Matsushita Electric of Puerto rico Inc Panasonic Sales Company Factory Servicenter Ave 65 de Infanteria Km 9 5 San Gabriel Industrial Park Carolina Puerto Rico 00985 Phone 787 750 4300 Fax 787 768 2910 As ot April 98 Panasonic Consumer Electronics Company Division of Matsushita Electric Corporation of America One Panasonic Way Secaucus Panasonic Sales Company Division of Matsushita Electric of Puerto Rico Inc PSC New Jersey 07094 Ave 65 de Infanter a Km 9 5 i j San Gabriel Industrial Park Carolina pe AM Puerto Rico 00985
31. 3 Display SET UP CH screen 1 Press AW gt to select CH 2 Press SET to ee display SELECT a SET SET Select CABLE BOX SET UP 1 Press AV to select 2 Press SET to display ANTENNA CABLE AUTO SET WEAK SIGNAL DISPLAY OFF CABLE BOX SET UP VCR Plus CH SET UP SELECT a SET SET END ACTION Select YES or NO 53 1 Press AV to HABLE BOX SET UP select YES ARE YOU USING A CABLE BOX or NO 2 Press SET SELECT 4 y SET SET to set END ACTION If you select B YES gt Step 5 B NO gt Press ACTION gt Goto VCR Plus Channel Setup on page 24 1 CABLE BOX SET UP Select Cable Box output channel number 1 Press AV to select 2 Press SET to enter ENTER CABLE BOX OUTPUT CHANNEL SELECT a v SET SET END ACTION f necessary refer to your cable box manual f you are using Audio Video jack connection for your cable box select and set VIDEO OUT as the output channel Process of Recording Connection gt EM gt Programming A cheek list before you begin itis necessary to enter TV mode by pressing DVDSTV before selecting CH on the MAIN MENU ACTION 2 SELECT AVY4 VCR Plus and PlusCode are registered trademarks of Gemstar Development Corporation The VCR Plus system is manufactured under license from Gemstar Development Corporation
32. 7596 Weight 40 5 kg 89 1 Ibs Dimensions 688 W x 653 H x 550 D mm 27 1 16 W x 25 11 16 H x 21 5 8 D Discs played 1 DVD VIDEO disc 5 12 cm single sided single layer 5 12 cm single sided double layer 5 12 cm double sided double layer one layer per side 3 B crn single sided single layer 3 8 cm single sided double layer 3 8 cm double sided double layer one layer per side 2 Compact disc 5 12 cm disc 3 8 cm disc CD DA VIDEO CD Digital audio output Optical digital output Optical connector Coaxial digital output Pin jack Pickup Wave length 655nm Laser power CLASS II Note Designs and specifications are subject to change without notice For assistance call 1 800 211 PANA 7262 Connections ep Outdoor Antenna Connections D e Unhook the antenna from your previous TV Flat Twin Lead 21 or VCR and connect it to the back of the 300 Ohm Cable e unit as shown in the diagram e ep If your antenna system has separate UHF UHF VHF Band Mixer D and VHF lead ins you need a UHF VHF not supplied mi Band Mixer not supplied am D WARNING COE When using Nut type RF coaxial fona eate _ oF cables tighten with fingers only from Ant Overtightening may damage rom Antenna 300 75 ohm Transformer terminals not supplied Flat Twin Lead Mv one Cable Pack GUNI DSS Cable box Connections B Without a Cable Box You can record or view unscrambled c
33. 9e 3 ANGLE 2 Press SET to Example perform Step 2 not necessary when using NUMBERED If menu continues onto another screen key s repeat step b 48 For assistance call 1 800 211 PANA 7262 EJECT OPEMCAIKE LIGHT a MENU 2 NUMBERED Keys SELECT avd b 2 SET D 1 TITLE VD Lock Feature You can prevent playback of DVDs in a specific rating level which may be unsuitable tor children Some DVDs are encoded with a rating level If the disc rating is higher stricter than the one you preset playback will be prohibited Discs not encoded with rating level will play even if the jacket states itis tor mature audiences For these discs the DVD Lock Ratings will not work Setup DVD Lock Ratings DVD only Enter your secret code to display LOCK menu Do Enter Secret Code steps on page 36 Select DVD LOCK o STATUS MOTION PICT STATUS OFF 1 Press AV IV PARENTAL STATUS OFF to select CHANGE SETTINGS Mii a cm 2 Press pm SET to set ON or If you select DVD LOCK STATUS OFF B ON DVD Lock is activated B OFF DVD Lock is deactivated Select CHANGE SETTINGS WOTTON PICT STATUS OFF A 1 Press AV CHANGE SETTINGS to select a sete t 2 Press SET SELECT A v SET SET to display END ACTION Select RATING LEVEL 1 Press AV4P to select 2 Press SET to select LOCKED or UNLOCKED LEVEL 1 Lock
34. ACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL This symbol alerts the user that important literature concerning the operation and maintenance of this unit has been included Therefore it should be read carefully in order to avoid any problems o Region Management Information Region Management Information This unit is designed and manufactured to respond to the Region Management i Information that is recorded on a DVD disc If the Region The eden TUMOSI Gp number described on the DVD disc does not correspond to for this unit is 1 the Region number of this unit this unit cannot play this disc Table of Contents e Important Safeguards and Precautions 2 To Before Using 6 i Accessories enen 6 e Record Playback Time 6 Start a Loading the Batteries 6 Prevent Accidental Tape Erasure 6 Definition of terms 7 Disc handling uf X i Reset all unit iiid Functions avind 8 DST Daylight Saving Time brea 8 i Head Cleaning eseesss d 9 Specifications ocoociocconccnrononss 8 TV Operation 14 P l Main Operation Using the 100 Key Rapid Tune Audio Mute Phones y se VCR Status amp Clock Display Black Screen Display Now MTS Broadcast TV Stereo System 15 Stereo SAP Mono broadcast Select Audio Mode for TV Viewing Timer Recording
35. ACTION Seleccionar el deseada Se visualizan los del disco SELECT a v SET SET END ACTION seleccionar 2 Pulse SET para seleccionar Repita el paso 5 para seleccionar otra pista La pista seleccionada se a ade a la parte derecha Comenzar PROGRAM PLAY 1 Pulse AV4D para seleccionar START 2 Pulse SET La reproducci n comienza en la secuencia programada Para cancelar pulsar STOP durante la reproducci n y luego pulse ADD DLT n mero de la pista n meros de la pista 1 Pulse AV4 P para Reproducci n arbitraria Video CD CD Las pistas se reproducen de forma arbitraria Repita los pasos 1 3 de la p gina anterior Seleccione RANDOM PLAY 1 Pulse AV para PROGRAM PLAY seleccionar 2 Pulse SET SELECT a SET SET END ACTION Comienza la reproducci n arbitraria Para cancelar pulse STOP durante la reproducci n y luego pulse ADD DLT TI o lt o c ium 4 de 3 0 ja 61 ula para rapida consulta Cambio del idioma de subt tulos DVD solamente EI idioma de los subt tulos seleccionado al hacer las fijaciones iniciales se puede cambiar por otro idioma diferente si ste se encuentra disponible Pulse SUBTITLE durante la reproducci n Cuando no haya subt tulos grabados se visualizar en lugar del n mero de idioma love you J Seleccion
36. AY and press SET Subtitles Display ON OFF Subtitles is displayed Select ON or OFF by pressing OFF Subtitle is cleared AY and press SET 5 ANGLE No Change the No by pressing AV and press SET 6 Disc currently being played 7 Elapsed playing time When appears on the screen The screen may be changed by selecting the elapsed time while a button is being operated it Change the elapsed time by pressing NUMBERED keys means that the corresponding ex 01 23 45 029122232425 operation is prohibited by the unit This function does not work with some discs or the disc 42 For assistance cali 1 800 211 PANA 7262 Detailed descriptions of each On Screen Display Disc information screen For Video CD CD 1 TRACK 12 4 1 Track No 2 AUDIO LR 5 Change the No by pressing AV or the NUMBERED keys 3 PLAYBACK CONTROL OFF and press SET 2 Audio mode Change the mode by pressing AY and press SET SELECT a v S ES DEA REE NEXT _ DISPLAY 3 Playback control ON OFF Video CD with playback control only Video CD menu play is displayed FF Video CD menu play is cleared 4 Disc currently being played Video CD Qu Track NO and the elapsed playing time are not displayed during menu play of Video CDs with playback control EB 5 Elapsed playing time Disc information screen For Unit Change the desired mode during play by pressing AV and press SET a Repeat Play See
37. CD STOP Stop play Press STOP EA Eject the disc Press OPEN CLOSE 18 For assistance call 1 800 211 PANA 7262 m To Find a Particular Scene e When appears on the screen while a button is Rapid Advance gt being operated it means that the corresponding Press FF in play mode operation is prohibited by the unit or the disc Rapid Reverse Press REW in play mode To release press PLAY Sounds are heard during rapid advance at speed 1 RESUME function EN Noise lt static gt may be heard on DVDs recorded in LPCM format Starting rapid advance reverse during play started from menu on Video CDs may recall menu The unit memorizes the point where STOP is pressed P gt flashes on screen Press SKIP PI during play Each press skips a chapter DVD or track Video CD CD Skipping Back gt Press 1 SKIP during play Pressing once midway through a chapter track returns to start of that chapter track Each additional press skips back one chapter track Pressing SKIP PP I or 144 during play started from Power turns off after unit has been in stop menu on Video CDs may recall menu mode DVD for about 5 minutes The speed of advance reverse slow at first increases Press PLAY to resume play from this point g with each additional press of the button up to 5 levels Pressing STOP again or opening the tray 7 cancels RESUME Itis not canceled when power is turned off and O w To Skip a Chapte
38. D May include multiple camera angles stories etc Video CD with playback control Particular scenes or information can be interactively selected from a menu that appears on the screen T 3 Press POWER on the remote or unit Select DVD mode Press DVD TV Insert a disc 1 Press OPEN CLOSE 2 Place disc into disc tray Hold disc by its edges only page 7 with printed side up and use guides to place into o X Use 3 8 cm or 5 12 cm disc eee ene ej Start play PLAY REPEAT Press PLAY The disc tray closes automatically Or close the tray by pressing OPEN CLOSE Reading time differs depending on discs CLOSE READING lt Example of DVD gt If an interactive DVD or a Video PEE MEN CD with playback control is Castles used and a TITLE MENU appears as go to step 5 Birds Select the desired item 1 Press AW lt 4 or NUMBERED key s as shown below TITLE MENU 2 Press SET to play Using NUMBERED key s starts play Castles automatically lt Example gt Lovers e 1 digit number 1 ees 1 2 digit number 12 2103132 B j rds 3 digit number 123 9100313233 Press SKIP gt gt or I 44 to go to next or of the world previous menu screen SKIP function not available with all discs Please refer to disc jacket for Example of DVD operation information To return to menu play stops Press TITLE MENU or RETURN DVD Press RETURN Video
39. DIO OUTPUT See page 52 Otherwise any attempt to play DVDs may cause such a high level of noise that it may be harmful to your ears and damage your speakers When a dts decoder is connected please select Bitstream at dts of the DVD initial setting DIGITAL AUDIO OUTPUT If OFF is selected there will be no sound See page 52 Video CDs and CDs can be played as normal Note Some dts decoders which do Surround speaker not support DVD dts interface Left may not work properly with the unit Speaker Left Front speaker Right Subwoofer Surround speaker Right Q D 5 a YN et D D o One Time Setup When the unit is turned on the first time setup mode is entered automatically Press POWER on the remote or unit POWER Start Channel Auto Set and Clock Auto 2 42 304 EE Set CHANNEL CHANNEL CLOCK AUTO SET Press CH A r UP CONNECT ANTENNA CABLE ANO IF YOU USE A CABLE BOX TUNE IT TO YOUR LOCAL PBS CH THEN PLEASE PUSH CH UP KEY CH AUTO SET PROCEEDING NUMBERED 02 A ADD DLT AUTO CLOCK SET E PROCEED NG SET Setup completed Press CH Ato exit C amp D f the displayed W d n time and DST b C d gt FRI 12 00PM OFF are not correct B gt C D please do To SETTING CHIDO Set or Reset the AUTO CLOCK SET COMPLETED Clock steps on the next page and select MANUAL O O0 U
40. E START STOP Ch Rl a ai om Dax iE ou select T 2 Press SET SELECT a SET SET END PROG BACK B TIMER PROGRAM a ME START STOP CH SPD End programming Press PROG 3 30P SE LECT 14 4 ENTER SET END PROG CANCEL ADDVDLT Exit this mode T Press PROG twice PROG TIMER indicator lights on the unit f gt Select VCR Plus PROGRA VCR Plus PROGRAM Select Recording speed Z check list before you begin O The clock is set to correct time LI VCR Plus System Setup is complete See pages 23 24 34 NUMBERED Keys Use normal Timer Recording steps if a program PlusCode programming number is not listed program such as a sporting event may run over scheduled stop time See page 21 to cancel a timer recording in progress replace program contents review or clear program contents once set You can obtain unlisted PlusCode programming numbers by calling 1 900 454 7587 Call costs approximately 95 per minute Avoid overlapping program times f you re using a cable box make sure that it is turned to the desired channel and the power is left on for timer recording 25 gt Q lt Q 5 o Q O o O 9 O 5 imer Features ON TIMER with Alarm The unit can be set to automatically power on in one of 4 modes TV Playback FM radio or DVD You can also combine the On Timer with a one minute alarm that gradually in
41. EBLE Contro To adjust the intensity of high frequency sound BALANCE Control To adjust the L R unit speaker output level The levels set here do not affect other audio equipment when connected to the Audio Output L R Connector For assistance call 1 800 211 PANA 7262 DVD Initial settings Display MAIN MENU Press ACTION in stop mode a _ ___ _ 6 gt x 4 a Display DVD screen 1 Press a AVA to c Con select 2 Press SET SELECT a v SET SET DIGITAL AUDIO OUTPUT STILL MODE AUTO TV MODE Pan 4 Scan Select the desired item a 1 Press AV ooo to select v 2 Press SET SELECT 4 v SET SET END 1 ACTION DISC LANGUAGES See below All languages offered on the disc can be set If the language set is not offered on the disc the original disc language will be selected DIGITAL AUDIO OUTPUT See page 52 You can set the audio output that comes from the digital audio output terminal STILL MODE See page 53 To select Field still or Frame still to prevent jittering from occurring or to let small text or fine patterns seen clearly in the still picture mode When AUTO is set Field Still or Frame Still is selected automatically TV MODE See page 53 To select whether the video material for a wide screen will be played back in the Pan amp Scan style or in the Letterbox style on the screen When selecting DISC LANGUAGES DVD only
42. EL ADO DLT Exit this mode Press PROG twice If you re using a cable box make sure that it is turned to the desired channel and the power is left on for timer recording PROG TIMER indicator lights on the unit A check list before you begin C All connections are made See page 9 Q Your unit is plugged in The clock is set to correct time The tape is long enough C The record tab is in place 2 minutes before Timer recording is performed PLEASE PREPARE FOR TIMER REC appears and or the PROG TIMER indicator flashes Be sure a cassette with record tab is loaded and the unit is in Stop mode f the start times of two programs overlap the lower numbered program will have priority If the start time for a Timer Recording comes up during a normal recording or One Touch Recording page 17 the Timer Recording will not be performed If there is a power interruption of more than one minute the recording may not be performed or continue If INCOMPLETE appears after all items have been set check all entries and make necessary corrections 20 For assistance call 1 800 211 PANA 7262 Review Replace or Clear Program Contents Recording is not in progress a Repeat steps 1 and 2 on page 20 Select the desired b program PROG TIMER PROGRAM DATE START STOP CH SPD a Press AV to 4 9 P KIP 08 SP select a s aeons M LES Co C3 4 cuis v C To R
43. ETURN SELECT avd 3 2 SET 3 When appears on the screen while a button s being operated it means that the corresponding operation is prohibited by the unit or the disc uone1Iado M e Fe V 7 0 v JVD Operation using On Screen Displays continued Detailed descriptions of each On Screen Display Disc information screen For DVD 1 2 1 TITLE No 3 Change the No by pressing AW or the NUMBERED keys 4 and press SET 5 2 Chapter No Change the No by pressing AW or the NUMBERED keys and press SET SE LECT n m SET SET 3 Audio sound track language No English CHI FRA French NOR Norwegian KOR AL ITA Italian POR Portuguese VIE ESP Spanish RUS Russian THA NLD Japanese Audio attribute 1 type sampling frequency bit No of the disc 96KHz LPCM or did ich 5 1ch Dolby Digital AC 3 disc ich 5 1ch DTS disc Number of recorded vocals DVD Karaoke only VOCAL Karaoke 1 vocal OFF Karaoke 2 vocals iene gt I Change the No by pressing AV and press SET Linear PCM disc Change the No by pressing AV and press SET Change the No by pressing AVY and press SET 4 Subtitles language No SVE CHI Norwegian Danish ITA italian POR Portuguese VIE Vietnamese ESP Spanish RUS Russian THA Thai Change the No by pressing
44. JQ 0c Setup incomplete Set the clock IMPORTANT NOTE FOR AUTO CLOCK SET y manually Auto clock set is performed the first LET N Press ACTION time when the unit is turned off each and do To Set day If used a cable box must be left AUTO GEBEN ET AG AN on and tuned to the PBS channel at or Reset the the time the unit power is turned off if Clock step D on you want auto clock set to be done the next page if using aDSS receiver it must be turned off for auto clock set If Cable Box or OSS receiver is connected to the unit via Audio Video Jacks an RF coaxial cable must also be connected for auto clock set and channel auto set features f for any reason the time is changed manually automatic time correction will not occur 12 For assistance call 1 800 211 PANA 7262 To Replace Channels in Memory It is necessary to enter TV mode by pressing DVD TV before selecting CH on the MAIN MENU a Display MAIN MENU Press ACTION Display SET UP CH screen 1 Press AV lt 4 gt to select CH 2 Press SET to display lt gt Sx SELECT SET SET Select ANTENNA 1 Press AV to select 2 Press SET to select your antenna system AUTO SET WEAK SIGNAL DISPLAY OFF CABLE BOX SET UP VCR Plus CH SET UP SELECT a v SET SET END ACTION Select AUTO SET 1 Press AV to select 2 Press SET WEAK SIGNAL DISPLAY OFF CABLE BOX SET UP VC
45. R Press REC repeatedly to set the recording length 30 min 4 hours The unit stops recording at a preset time PROG TIMER indicator lights on the unit eui Rec 0 30 1 00 RENAL elt is not possible to record from DVD Video CD CD to VHS tape using this unit After the unit has been in Rec Pause mode for 5 minutes it will stop automatically to protect the tape and video head Selecting Input Mode Method 1 The remaining recording time of an OTR can be displayed by Press CHAY The display will change as pressing DISPLAY follows 1 243 CABLE TV You can operate on the unit LINE 4 125 or 69 1 insert a cassette Method 2 a Press ACTION for MAIN MENU b Press A 4 gt to select TV then press SET for SET UP TV screen c Press AY to select INPUT SELECT and then press SET to select TUNER or LINE d Press ACTION twice to exit this mode Basic DVD Operation iA check list before you begin L All connections are made See page 9 C Your unit is plugged in C Switch on the stereo system s power if the unit has been connected to an audio Amplifier OPEN MENU 210 RETURN 4 PLAY NUMBERED Keys REW SLOW eS FF SLOW SKIP 7 6 stop SKIP 3 PAUSE T 5 set 5 TITLE SELECT AV4 You can operate on the unit 4 Press PLAY Press 3 Insert e OPEN CLOSE a disc 7 EN 1 6 Press to stop Interactive DV
46. R Plus CH SET UP SELECT a SET SET END ACTION End setup Press ACTION twice Add or Delete a Channel To add channel CHANNEL 08 ADDED Select channel with NUMBERED keys and press ADD DLT CHANNEL 08 DELETED To delete channel Select channel with CH AY or NUMBERED keys and press ADD DLT TV or CABLE To Set or Reset the Clock Gs Display MAIN MENU Press ACTION Display SET CLOCK screen 1 Press AW4 to select CLOCK 2 Press SET SET SET Display SET CLOCK screen 1 Press AV to select MANUAL 2 Press SET For Auto Clock Set select AUTO CLOCK SET then press SET to set and CH A to start Set the clock manually SET CLOCK DATE TIME OST 1 Press AV to iBi ON select the month 2 Press SET SELECT END ACTION SET SET Likewise set date year time and DST Daylight Saving Time To Make Corrections repeatedly press lt gt to move to error then correct End setup Press ACTION twice to start the clock and exit this mode This unit calendar is accurately maintained up to Dec 31 2089 11 59 PM Channel auto set selects normal TV or Cable channels depending on your unit hookup 13 G 5 a 0 ent m ert o TV Operation Press POWER on the remote or unit 2 Select a channel Using CH AY or NUMBERED keys 04125 Ly Adju
47. Selecci n de DIGITAL AUDIO OUTPUT Visualizar MAIN MENU Pulse ACTION en el modo de parada 1 Pulse AW para seleccionar 2 Visualizar la pantalla DVD 2 Pulse SET 1 Pulse AV para seleccionar 2 Pulse SET DISC LANGUAGES Todos los idiomas ofrecidos en el disco pueden ser ajustados Si el idioma ajustado no es ofrecido en el disco se seleccionar e idioma original del disco DIGITAL AUDIO OUTPUT Puede usted ajustar la salida audio procedente del terminal de salida audio digital STILL MODE Para seleccionar Campo fijo o Marco fijo para prevenir inestabilidad o para permitir ver textos peque os o patrones finos claramente en el modo de imagen fija TV MODE Para seleccionar si el material del v deo para pantalla ancha ser vuelto a reproducir en el estilo Pan amp Scan o en el estilo Letterbox en la pantalla A Seleccionar el articulo deseado 3 Seleccionar el articulo deseado 1 Pulse AY para seleccionar 2 Pulse SET Volver a visualizar el men de DVD para 5 continuar el ajuste Pulse ACTION y pase al paso 3 para ajustar otro ajuste o para salir pulse ACTION tres veces Selecci n de DISC LANGUAGES DVD solamente Seleccione AUDIO English French Spanish Fijaci n de f brica ingles Original Se seleccionar el idioma original de cada disco OTHER Se puede seleccionar el otro idioma Seleccione SUB TITLE AUTO Se seleccionar el mismo que fue selecc
48. TU 2 Press SET ICI to set ON Ej ACTION END ACTION or OFF If you select MOTION PICT STATUS B ON V Chip Control is activated B OFF V Chip Control is deactivated END ACTION YES or NR Not Rated PROGRAMS NO Some movies such as old movies or foreign movies usually have no ratings 1 SELECT l AY Select CHANGE 2 SETTINGS agi PICT STATUS OFF 4 1 din AY 3 TV PARENTAL STATUS OFF od to select DvD tock stars o OFF a 2 Pr ess SET 4 SELECT Xm ESE to display 1 SET gt Select VIEW NR 2 lt PROGRAMS 3 5 VIEW NA PROGRAMS NO 1 Press AY e xcd to select 4 a NC 17 2 Press SET O LS DO ATING SET SET to set D M 0 O MOTION PICTURE RATINGS Select ratings to be z DIENCE blocked See right Apis epum us 1 Press AY PARENTAL GUIDANCE to select Some material may not be NC 17 2 Press SET suitable for children GENERAL AUD I ENCE to set PARENTS CAUTIONED Some material may be inappropriate for children under 13 SELECT a Y END ACTION Redisplay LOCK menu RESTRICTED to continue setup Under 17 requires Press ACTION and go to accompanying parent or adult 38 TV PARENTAL Rati children ices e OVER AGE 17 ONLY No one 17 and under admitted ADULTS ONLY r to exit press ACTION three times hip Feature continued a Process of V Chip Control Feature Setup TV PARENTAL Ratings Enter Code gt ETT gt g
49. U Channel Sep Preparations To complete step 4 left make a local channel list see example below You will need the following Anormal TV and or Cable stations line up and the channel numbers your receive them on A list of Guide VCR Plus channel numbers for stations you receive See TV Guide and selected newspapers 1 Make a 3 columns chart In the left column write all station names you receive 2 In the middle column write each station s Guide VCR Plus number 3 In the right column write the channel number your TV receives the station on lt EXAMPLE ONLY gt Broadcast Channel no your TV VCR Plus receives the channel no station on Assigned or Cable Guide Station Nickelodeon CBS 24 For assistance call 1 800 211 PANA 7262 Process of Recording pios o Connection gt Setue EXETER Display PROGRAM screen Press PROG TIMER PROGRAM ON TIMER SLEEP TIMER 1 Press AV to select 2 Press SET to display SELECT 4 SET SET PROG END Enter PlusCode programming number 1 Press NUMBERED keys 2 Press SET when finished To Make Corrections Press repeatedly to delete the PlusCode programming number Set Record Frequency 1 Press AV to pron VCR Plus PROGRAM ENTER PLUSCODE NUMBER O select s 2 Press SET DAILY MON FRI WEEKLY SELECT a SET SET END PROG VCR Plus PROGRAM See page 6 1 Press AV to DAT
50. a Visualizaciones en pantalla Pulse DISPLAY en el men reproducci n o parada Cada vez que se pulse DISPLAY la visualizaci n en pantalla cambia como se muestra a continuaci n Informaci n seleccionada del disco y Informaci n seteccionada de la unidad y Pantalla normal 2 Seleccio el tem deseado 1 Pulse AW o lt p para seleccionar 2 Pulse SET para ajustar Ejomplo de DVD Seleccion el TITLE 2 ajuste deseado CEA A i Pulse aw Gu para AER am AC 3 2 seleccionar E ab m 2 Pulse SET para ajustar SELECT A v 4 NEXT DISPLAY SET SET Para volver a la pantalla normal pulsar repetidamente RETURN o DISPLAY Ejomplo de V deo CD 10 PLAYBACK CONTROL OFF SET SET SELECT 4 NEXT DISPLAY Por ayuda llame al 1 800 211 PANA 7262 Reproducci n programada V deo CD CD Puede usted programar pistas espec ficas y el orden de reproducci n Video CD o CD es insertado en el modeo DVD Visualizar MAIN MENU Pulse ACTION en el modo parada Visualizar la pantalla DVD 1 Pulse AV gt para seleccionar DVD 2 Pulse SET para visualizar Seleccionar PLAY MODE 1 Pulse AV para seleccionar TV MODE 2 Pulse SET para SELECT a Y SET SET visualizar END ACTION Seleccionar PROGRAM PLAY 1 Pulse AY para PLAY MODE seleccionar da 2 Pulse SET para SELECT SET SET visualizar END
51. a 1 3 28 AE 1 ENG ON BANGLE SELECT NEXT DISPLA SET SET lt Example of Video CD gt VIDEO CD esa pig PLAYBACK CONTROL OFF AUDIO PLAYBACK CONTROL OFF SE LECT NEXT SET SET t SPLA Display On Screen Displays Press DISPLAY in play or stop mode Each time DISPLAY is pressed On Screen Display changes as shown below refer to 42 or 43 page Selected disc information Selected unit information Normal Screen Select the desired item 1 Press AY or 4P to select 2 Press SET to set Ao Select the desired the desired niat Press AY to select 2 Press SET to set e A some functions the setting will be registered immediately without pressing SET When numbers are displayed e g title number the NUMBERED keys are also available To make corrections repeatedly press AV and SET to move to error then correct Pressing 4 is effective for elasping time instead of the above buttons Press 4 repeatedly to delete the error then correct To return to the normal screen press RETURN or DISPLAY repeatedly When DISPLAY button is pressed during playback of a Video CD with Playback control the NUMBERED keys are not available on the displayed screen In this case press DISPLAY again to remove the displayed screen EU check list before you begin It is necessary press DVDeTV to enter DVD mode 1 DISPLAY NUMBERED keys R
52. a cinta gt Pulse REW TODAY P la cinta gt Pulse EJECT i SELECT START DATE 2 Pulse gt o 4 para BB Para expulsar la cinta ulse ene Sener SET SET ajustar control remoto o STOP EJECT en el aparato END 1 31 Grabaci n nica DAILY a la misma hora de lunes a viernes WEEKLY SUN SAT a la misma hora una vez a la Operaciones b sicas para la grabaci n semana p 4 949 3177 1 mam Qieeeoo IS Inserte un casete con la leng eta para Fecha de hoy 7 A V Orden para elegir DAILY prevenci n de grabado El aparato se enciende autom ticamente WEEKLY u WEEKLY WEEKLY SAT MON SUN Seleccione el canal Ms Repita el paso 3 para ajustar Pulse CH A V o las teclas num ricas hora de comienzo hora de parada canal o LINE para correspondiente una fuente exterior velocidad SP LP SLP Termine el programa ri Pulse PROG PROG TIMER PROGRAM DATE START qp ch gp Para introducir m s 4 9 30P 08 SP programas Pulse AY y p para Seleccione la velocidad de grabaci n Pulse SPEED 4is SP reproducci n normal LP reproducci n larga SLP reproducci n super larga La velocidad seleccionada debe aparecer en 3 4 la pantalla dfe ha il seleccionar y ajustar el i n mero de programa en Comience la grabaci n blanco y luego repita los Pulse REC paso 3 Para editar partes no deseadas de una grabaci n pulse PAUSE para hacer una o pausa durante la grabaci n S
53. alga de este modo a No podr ver otro canal durante la grabaci n Pulse PROG dos veces e B Para parar gt Pulse STOP Si est usando un decodificador de TV cable 2 WI El aparato deja de grabar a una hora asegurese que se encuentra en el canal deseado x prefijada Grabaci n de un toque y 2 la cade i conectada para 5 rabar con temporizador Pulse REC repetidamente para ajustar 9 Hi p o la hora de grabaci n 30 min 4 El indicador PROG TIMER se enciende en el horas aparato E fto E o Co normal 0 30 9 1 00 4 004 3 00 4 2 00 4 1 Re 59 Spanish Quick Use Guide Guia para r pida consulta Operaciones basicas del DVD 1 Pulse POWER en el control remoto o el aparato Elija el modo DVD Pulse DVDSTV introducir un disco 1 Pulse OPEN CLOSE 60 NO Ol T 2 Ponga un disco en la bandeja de disco Sujete el disco sin tocar ninguna de sus superficies p ngalo con el lado donde este impreso el t tulo hacia arriba alin elo con las gu as y p ngalo en su posici n apropiada Disco de 3 B cm Disco de 5 12 cm Iniciar la reproducci n Pulse PLAY La bandeja del disco se cierra autom ticamenty Si est usando un DVD interactivo Interactive DVD o un V deo CD con contol de reproducci n playback control y aparece un men de t tulos TITLE MENU en la pantalla siga al paso 5 Elija el art culo deseado 1 Pulse AW P gt o las teclas num ricas 2 Puls
54. ar el idioma deseado 1 Pulse AV para seleccionar idioma 2 Pulse gt o lt para ajustar 3 Pulse A o V para seleccionar ON o OFF Para voler a la pantalla normal pulse SUB TITLE Cambio del idioma de la pista de sonido DVD solamente El idioma de la pista de sonido seleccionado al hacer las fijaciones iniciales se puede cambiar por otro idioma diferente si ste se encuentra disponible AUDIO 1 ENG ACI ach Je SELECT 4 SET SET Visualizar la pantalla AUDIO Pulse AUDIO durante la reproducci n Seleccionar el idioma deseado Press AY to select desired language 2 Para voler a la pantalla normal pulsar AUDIO Seleccion de vocal para los discos de Karaoke DVD Video CD Visualizar la pantalla AUDIO Pulse AUDIO durante la reproducci n Seleccionar el ajuste deseado 1 Pulse AW o lt p para seleccionar 2 Pulse J gt o amp para ajustar DVD solamente 2 AUDIO 3 VOCAL ON SELECT 4 DVD Karaoke 1 vocal VOCAL ON VOCAL OFF DVD Karaoke 2 vocales VOCAL Vt V2 gt VOCAL V1 T y VOCAL OFF VOCAL V2 Video CD LRA9L 29 R 62 Vision desde otro angulo DVD solamente Algunos discos DVD tienen escenas que hansido filmadas simultaneamente desde un numero de angulos diferentes Con estos discos la misma escena podr verse desde cada uno de estos ngulos diferentes utilizando el bot n ANGLE Visualizar
55. at Play Set to view or listen to a chapter or title DVD or a b track Video CD CD a PLAY REPEAT REPEAT OFF Set Repeat Play Press PLAY in play mode For your reference CHAPTER TITLE REPEAT PLAY DVD CURRENT PLAY BACK POSITION Select Repeat mode 1 Press AY to TITLE si select the chapter chapter chapter gt Q lt to O Q O ze M o me O desired mode CHAPTER REPEAT 2 Press SET to A SELECT SET SET set Displays dk RE i i i changes as shown below TRACK DISC REPEAT PLAY Video CD CD DVD CHAPTER REPEAT 3 TITLE REPEAT gt REPEAT OFF CURRENT PLAY BACK POSITION S Video CD CD TRACK REPEAT 3 DISC REPEAT 3 REPEAT OFF wrack track A TRACK REPEAT To cancel repeat this operation to select REPEAT OFF DISC REPEAT i i Repeat play may not work correctly with some DVDs NORMAL PLAY Repeat play works only with discs for which the elapsed i playing time appears on screen display during playback 45 Disc Operation continued Changing subtitle language DVD only You can select a different subtitle language if offered than the one set at the initial settings See page 51 Display the subtitle screen Press SUB TITLE in play mode When no subtitles are offered will be displayed instead of the language number SUB TITLE love you E E EXT SET SET
56. ats supported by this unit The unit can play back discs bearing any of the following marks DVD ow IA 3 8 cm disc 5 12 cm disc ise Video CD DIGITAL vioen 3 8 cm disc 5 12 cm disc COMPACT C D DIGITALAUDIO 3 8 cm disc 5 12 cm disc Discs which cannot be played with this unit DVD with Region No other than 1 or ALL DVD of PAL system DVD ROM DVD R DVD RAM CD ROM CDV CD G CD RW Do not try to play Photo CD or CD R Definition of terms Angle Some DVD discs feature scenes simultaneously shot from different angles The ANGLE button can be used to view the scene from different angles ANGLE indicator lights on the unit when a scene recorded at different angles is detected Chapter number Titles are subdivided into numbered sections You can quickly search for a favorite scene using these numbers DVD A high density optical disc on which high quality pictures and sound have been digitally recorded DVD incorporates new video compression technology MPEG II and high density recording technology which allow entire movies to be recorded with incredible playback quality Playback control With Video CD version 2 0 scenes or information may be selected for viewing or listening from a interactive menu that appears on the TV screen Subtitles Written dialogue which appears at the bottom of the screen Time number The elapsed play time from the start of a disc or title
57. aturday Sunday 9am 7pm EST Web Site http www panasonic com You can purchase parts accessories or locate your nearest servicenter by visiting our Web Site Accessory Purchases 1 800 332 5368 Customer Orders Only Panasonic Services Company 20421 84th Avenue South Kent WA 98032 6 am to 5 pm Monday Friday 6 am to 10 30 am saturday PST Visa MasterCard Discover Card American Express Check Factory Servicenters Locations CALIFORNIA 6550 Katella Avenue Cypress CA 90630 800 Dubuque Avenue S San Francisco CA 94080 20201 Sherman Way Suite 102 Canoga Park CA 91306 3878 Ruffin Road Suite A San Diego CA 92123 COLORADO 1640 South Abilene Street Suite D Aurora CO 80012 FLORIDA 3700 North 29th Avenue Suite 102 Hollywood FL 33020 GEORGIA 8655 Roswell Road Suite 100 Atlanta GA 30350 ILLINOIS 9060 Golf Road Niles IL 60714 1703 North Randall Road Elgin IL 60123 Pick up Drop off only MARYLAND 62 Mountain Road Glen Burnie MD 21061 MASSACHUSETTS 60 Glacier Drive Suite G Westwood MA 02090 MICHIGAN 37048 Van Dyke Avenue Sterling Heights MI 48312 MINNESOTA 7850 12th Avenue South Airport Business Center Bloomington MN 55425 OHIO 2236 Waycross Road Civic Center Plaza Forest Park OH 45240 PENNSYLVANIA 2221 Cabot Blvd West Suite B Langhorne PA 19047 Chartiers Valley Shopping Center 1025 Washington Pike Bridgeville PA 15017 TENNESSEE 38
58. bove THE WARRANTOR SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES INCLUDING WITHOUT LIMITATION DAMAGE TO TAPES RESULTING FROM THE USE OF THIS PRODUCTS OR ARISING OUT OF ANY BREACH OF THE WARRANTY ALL EXPRESS AND IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE ARE LIMITED TO THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts so the above exclusions or limitations may not apply to you This warranty gives you specific legal rights and you may also have other rights which vary from state to state If a problem with this product develops during or after the warranty period you may contact your dealer or Servicenter If the problem is not handled to your satisfaction then write to the Customer Satisfaction Center at the Panasonic Consumer Electronics Company address above SERVICE CALLS WHICH DO NOT INVOLVE DEFECTIVE MATERIALS OR WORKMANSHIP AS DETERMINED BY THE WARRANTOR IN ITS SOLE DISCRETION ARE NOT COVERED COSTS OF SUCH SERVICE CALLS ARE THE RESPONSIBILITY OF THE PURCHASER warvid 10 20 97 T1 o S e o imm 4 3 c o 67 For Product Information Operating Assistance Literature Request Dealer Locations and all Customer Service inquiries please contact 1 800 211 PANA 7262 Monday Friday 9am 9pm S
59. co Inc One Panasonic Way AVE 65 de Infanteria Km 9 5 San Gabriel Secaucus New Jersey 07094 Industrial Park Carolina Puerto Rico 00985 PANASONIC Video Products Limited Warranty Panasonic Consumer Electronics Company or Panasonic Sales Company collectively referred to as the Warrantor will repair this product with new or refurbished parts free of charge in the USA or Puerto Rico in the event of a defect in materials or workmanship as follows all time periods commence from the date of the original purchase PRODUCT PARTS LABOR CAMCORDER ONE 1 YEAR EXCEPT CCD IMAGE SENSOR NINETY 90 DAYS CCD IMAGE SENSOR SIX 6 MONTHS NINETY 90 DAYS VCR ONE 1 YEAR NINETY 90 DAYS A V MIXER ONE 1 YEAR NINETY 90 DAYS MONITOR VCR DVD ONE 1 YEAR EXCEPT CRT NINETY 90 DAYS CRT TWO 2 YEARS CRT NINETY 90 DAYS CUSTOMER PAYS ALL LABOR CHARGES AFTER 90 DAYS Monitor VCR DVD In home or carry in Service 22 diagonal CRT LCD and Larger Monitor VCR Carry in Service 21 diagonal CRT LCD and smaller Batteries if included New rechargeable batteries in exchange for defective rechargeable batteries for ten 10 days Non rechargeable batteries are not warranted Tape if included New video cassette tape in exchange for a defective video cassette tape for five 5 days In home carry in or mail in service as applicable in the USA can be obtained during the warranty period by contacting a Panasonic Services C
60. coder PCM iBitstream Bitstream Make settings according to amplifier connected to optical When a dts decoder is not connected to enjoy dts DVD please select audio output other than dts at the dts DVD unit speakers Audio output from unit is converted to 4B kHz 16 To enjoy high quality sound at 48 kHz 20 bit 24 bit or 96 kHz connect the amplifier or decoder audio output connector Select OFF at the LPCM DVD When connecting an amplifier with an optical contain the Dolby Digital AC 3 or dts decoder be sure to select PCM or Off such a high level of noise as to be harmful to your ears and damage the speakers Bitstream in dts If OFF is selected there will be no sound 3 The virtua surround effect may not work properly for some DVD software Tum off other surround effects when using this virtual surround effect For optimum effect the distance between the unit and the listener should be about 3 or 4 times the distance between the right and left front speakers se Li For assistance call 1 800 211 PANA 7262 Selecting STILL MODE Set to reduce jitter in a displayed still picture 1 Do steps 1 and 2 on page 51 Set STILL MODE 1 Press AV to select TV MODE 2 Press SET repeatedly to DVD DISC LANGUAGES DIGITAL AUDIO OUTPUT STILL MODE FIELD TY MODE gt Letterbox SELECT a SET SET END ACTION select setting AUTO Field still or Fram
61. creases in volume Display PROGRAM screen Press PROG C __ Select ON TIMER ON TIMER 1 Press AV VCR Pius to select TIMER PROGRAM mn scr p ET SEER T THER 00 Cv 2 Tess SET to display SELECT a SET SET END PROG ON TIMER IA MODE ALARM E mo oN SELECT HOUR SELECT a Y END PROG Set the ON TIMER DATE 1 Press AV to select 2 Press SET to set SET SET Make sure a tape is inserted if Playback mode is selected Make sure a disc is inserted if DVD mode is selected e See FM Radio on pages 30 and 31 for ON TIMER mode selection order CH02 CH023 CH125 CHO PLAY instructions on how DVD FM9 FMB8 FM1 to preset FM stations Set Alarm Press AV to FROG ON TIMER i 5 TIME MODE PERI EE ON or 10 00AM DVO Wi CANCEL ADD DLT SELECT 4 SET SET END PROG When ON is selected an alarm will gradually increase in volume for one minute or until cancelled by pressing any button including VOL To Make Corrections use AV and SET or to move back and correct as mecessay O O Z 0 Set ON TIMER 5 Press PROG ON TIMER SET is displayed BACK ON TIMER indicator ss ON TIMER indicator lights on the u on the unit End setup Press PROG To cancel ON TIMER set Repeat steps 1 and 2 Then press ADD DLT to clear the time in step 3 Now press PROG to end ON TIMER END appears on screen for
62. direct sunlight that are humid or dusty near heat i e heater regulator etc This product incorporates copyright protection technology that is protected by method claims of certain U S Patents and other intellectua property rights owned by Macrovision Corporation and other rights owners Use of this copyright protection technology must be authorized by Macrovision Corporation and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation Reverse engineering or disassembly is prohibited Before Using continued Reset all unit Memory Functions Use when moving unit to a new location or if a mistake was made in the One Time Setup section Make sure a tape is not inserted in the unit 1 Turn the unit Power on 2 Press and hold both FF and PLAY on the unit for more than 5 seconds The power will shut off 3 Do One Time Setup Steps on page 12 DST Daylight Saving Time Unit auto adjusts clock for DST Daytight Saving Time Spring First Sunday in April DST ON Sets clock ahead one hour NORMAL TIME 1 00 a m 200m DAYLIGHT SAVING TIME Autumn Last Sunday in October OST ON Turns clock back one hour DAYLIGHT 1 00 a m 2 00 a m SAVING TIME NORMAL TIME If your area does not observe Daylight Saving Time select DST OFF See page 13 Keep these time changes in mind when programming the unit for t
63. e correspondante de la prise et pousser jusqu au fond This video recorder equipped with the HQ High Quality System is compatible with existing VHS equipment Only use those tapes with the mark It is recommended that only cassette tapes that have been tested and inspected for use in 2 4 6 and 8 hour VCR machines be used This television receiver provides display of television closed captioning in accordance with 15 119 of the FCC rules FCC WARNING Any unauthorized changes or modifications to this equipment would void the user s authority to operate CAUTION LASER RADIATION WHEN OPEN DO NOT STARE INTO BEAM CAUTION UNIT IS A CLASS I LASER PRODUCT HOWEVER THIS UNIT USES A VISIBLE LASER BEAM WHICH COULD CAUSE HAZARDOUS RADIATION EXPOSURE IF DIRECTED BE SURE TO OPERATE THE UNIT CORRECTLY AS INSTRUCTED WHEN THIS UNIT tIS PLUGGED TO THE WALL OUTLET DO ATTENTION RAYONNEMENT LASER EN CAS D OUVERTURE NE PAS REGARDER DANS LE FAISCEAU NOT PLACE YOUR EYES CLOSE TO THE OPENING OF THE DISC TRAY AND OTHER OPENINGS TO LOOK INTO THE INSIDE OF THIS UNIT OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF REFER SERVICING TO QUALIFIED PERSONNEL FCC NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provid
64. e SET para la reproducci n Si usa las teclas num ricas la reproducci n comienza autom ticamente Parar la reproducci n Pulse STOP Expulsar el disco Pulse OPEN CLOSE Para buscar una escena particular B squeda hacia adelante Pulse FF en el modo de reproducci n B squeda hacia atr s gt Pulse REW en el modo de reproducci n Para liberar pulse PLAY Para saltar un cap tulo o una pista Salto hacia adelante gt Pulse SKIP PI en el modo de reproducci n Un cap tulo DVD o una pista V deo CD CD se saita cada ves que se oprime la tecla Salto hacia atr s gt Pulse I SKIP en el modo de reproducci n Para ver una imagen fija Pulse PAUSE durante la reproducci n Para liberar pulse PLAY Para ver im genes cuadro a cuadro DVD V deo CD La imagen avanza un cuadro cada vez que presiona la tecla Pulse PAUSE en el modo de imagen fija Para volver a la reproducci n normal pulse PLAY Para ver en c mara lenta DVD V deo CD Pulse SLOW o SLOW en el modo de imagen fija Para liberar pulse PLAY Funcionnamiento del DVD utilizando visualizaciones en pantalla Cuando se pulsa DISPLAY la visualizaci n en pantalla muestra la informaci n del disco t tulo cap tulo n mero de sista tiempo transcurrido de reproducci n audio idioma del subtitulo y ngulo e informaci n repetir la reproducci n modo reproducci n Karaoke vocal e ncendido apagado etc Visualiz
65. e reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation f this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help FCC Caution To assure continued compliance example use only shielded interface cables when connecting to other devices Any changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate this equipment This symbol warns the user that uninsulated CAUTION voltage within the unit may have sufficient magnitude to cause electric shock Therefore it is T N dangerous to make any kind of contact with any CAUTION TO REDUCE THE RISK inside part of this unit OF ELECTRIC SHOCK DO NOT REMOVE COVER OR B
66. e still is automatically selected during the still mode Factory preset FIELD Field still is always selected Select this setting when jittering occurs in the pictures even when AUTO is selected FRAME Frame still is always selected Select this setting when small text or fine patterns cannot be seen clearly even when AUTO is selected P fx Extthismode 3 Press ACTION twice Selecting TV MODE Set the screen display style for wide screen video material playback a Do steps 1 and 2 on page 51 Set TV MODE ES 1 Press AV to pvp select TV DISC LANGUAGES MODE DIGITAL AUDIO OUTPUT STILL MODE FIELD TV MODE Letterbox 2 Press SET SELECT a SET SET repeatedly to en select setting Pan amp Scan Wide screen video data is played in Pan amp Scan Style left and right of screen is trimmed Factory preset e Video data not formatted in Pan 4 Scan will play in letterbox style Letterbox Wide screen video data is played in Letterbox style top and button of screen has black margin C Exit this mode Press ACTION twice 3 ACTION C 2 SELECT m o ium lt eo c h o 3 Q o 5 Sefore Requesting Service Check the flowing points once again if you are having trouble with your unit Correction Completely insert Power Plug into an AC outlet Set POWER button to ON Auto power off shut off occurs after about 5 minutes elapse i
67. ee page 18 See pages 8 16 32 PAUSE REWIND SEARCH See page 19 See page 16 RA PLAY REPEAT STOP EJECT IN See pages 18 45 See pages 16 17 S SKIP dd TVFM fie See page 19 See pages 30 31 3 m SKIP gt CHANNEL UP DOWN ES See pages 14 16 17 D OPEN CLOSE VOLUME UP DOWN R See page 18 See page 14 i 65 ON TIMER Indicator Lights when the On Timer is set See page 26 Remote Sensor REC Indicator Lights during recording In Rec Pause or OTR Pause mode the indicator flashes See page 17 ANGLE Indicator Lights when a scene recorded at different angles is detected See page 47 PROG TIMER Indicator Lights when the unit is set for Timer Recording It flashes when a Timer Recording has been set with no tape inserted the clock is not set or the tape is in motion See pages 20 21 25 Rear View of the unit Audio Output External Speaker Connector L R Output connector See page 10 See page 10 Speaker switch See page 10 VHF UHF Antenna Input Terminal See page 9 Optica digital audio AQ ZN 00008 a VADO TIG CERIS QU UG ULCUS QUO LO output connector fe See page 11 AC Power Plug Coaxial audio output connector See page 11 66 For assistance call 1 800 211 PANA 7262 Warranty Panasonic Consumer Electronics Company Panasonic Sales Company Division of Matsushita Electric Corporation of America Division of Matsushita Electric of Puerto Ri
68. enu P 50 Adjust TINT and COLOR controls in the SET UP TV menu P 50 Install a directional antenna Make sure the selected channel is in unit s memory P 13 Only the channel begin recorded can be viewed on this unit Correction Make sure your antenna system TV or CABLE is correctly set P 9 Make sure cassette record tab is intact P 6 Check that clock is set to current time and date Make sure DSS CABLE box if used is left on and tuned to channel to be recorded Set recording Start Stop time correctly P 20 21 Timer recording may not be performed or continued if a power interruption of more than 1 minute occurs before or during a Timer Recording after power is restored Adjust TRACKING control in either direction P 16 Try Head Cleaning P 8 Make sure VCR LOCK is set to off P 33 Correction This unit cannot play discs other than DVDs Video CDs and CDs The disc may be dirty and require cleaning Be sure disc is installed with label side up The picture will be somewhat distorted at times this is normal Some discs may have sections which prohibit rapid advance or rapid reverse Confirm the DVD LOCK setting P 49 If the audio soundtrack and or subtitle language selected at DVD initial settings does not exist on the disc it will not be accessible Subtitles appear only when available on disc OFF is selected at the changing subtitle language Select ON to display the subtitl
69. eplace program e ees se A 1 Press SET to ee DTO display Proc TIMER PROGRAM X 2 Press AV to PROG TIMER indicator START STOP CH SPD select and DATE coo SET or to set new Tate Program contents 3 Press PROG To Clear program TIMER PROG a E START STOP NT SPD Press ADD DLT SUN 9 00A 12 00P 08 SP MON 11 00A 11 304 125 SLP THU 8 009 9 30P L LP SELECT 1 8 4 Y ENTER SET END PROG m Exit this mode d Press PROG twice gt Q lt D 5 O O Q O U D D o 5 C PROG Cancel a Timer Recording C ADD OLT Recording is in progress Hold down STOP for 3 seconds to cancel the Timer STOP Recording Any future daily or weekly recordings will be performed as programmed C SET b SELECT Ava C 21 Timer Programming using V VCR Plus System is Pr IR din a feature that allows you to set most items of a Oreos OT ecole Timer Recording by simply entering a special CESTA gt Setup gt code number PlusCode found in TV GUIDE and selected newspaper TV listings Choose your connection type from the following diagrams B CABLE BOX 3 UNIT Set up on page Cable Box OUT E Programming on page 25 ANTENNA or CABLE gt UNIT Set up on page D cw COM 4 VHF UHF 22 For assistance call 1 800 211 PANA 7262 Cable Box Setup 1 Display MAIN MENU Press ACTION 2
70. es P 46 Alternative language cannot be selected with discs which do not contain more than one language For some discs alternative language cannot be selected with the AUDIO or SUB TITLE button Try selecting it from the DVD menu if available This function is dependent on software availability Even if disc has multiple angles they may be recorded for specific scenes only ANGLE indicator on unit lights up P 47 For assistance call 1 800 211 PANA 7262 Remote Control Unit cannot be controlled CH on the MAIN MENU cannot be selected Miscellaneous Video cassette cannot be inserted Video cassette cannot be removed Eject does not function or insertion cannot be done Video cassette ejects when a recording is started or the power is turned off for timer recording The disc cannot be removed In Stop mode the VCR motor CYLINDER continues to rotate Correction Aim Remote directly at the remote sensor on the unit P 66 Avoid any object blocking signal path Inspect the remote batteries P 6 Make sure VCR LOCK is set to off P 33 Exposing unit remote sensor to direct fluorescent or outdoor light may cause signal interference Press DVD TV for TV mode Correction Insert the cassette window side up record tab facing you Completely insert Power Plug into an AC outlet Turn the POWER off and then on and try ejecting or inserting the tape again Make sure cas
71. evo el reloj En caso de que el reloj es incorrecto o ha ocurrido un corte el ctrico 1 Pulse ACTI N para que parezca el MENU PRINCIPAL 2 Pulse AV 4 b para elegir CLOCK Luego pulse ACTION para que aparezca la pantalla de a FIJACION RELOJ 3 Pulse AY para elegir MANUAL y luego para que aparezca la pantalla de la FIJACI N RELOJ 4 Por favor continue con los pasos B y C de la instrucci n anterior Caso 2 Operaciones basicas para la reproducci n Grabaci n con temporizador 1 Exhiba FIJAR PROGRAMACION 1 Inserte un casete Pulse PROG El aparato se enciende autom ticamente Pulse PLAY PROGRAM La reproducci n comienza autom ticamente E si el casete no tiene la leng eta para vu E M 1 Pulse A V para prevenci n de grabaci n seleccionar SLEEP TIMER 00 aay 2 Pulse gt hibir MN Para encontrar una escena en particular t Pulse gt para still Busqueda hacia adelante 2 Pulse FF END PROG e Si ya existe un programa B squeda hacia atr s gt Pulse REW en la memoria pulseA V NW Para ver una imagen fija congelada gt y para seleccionar Pulse PAUSE un n mero de programa M Para ver en c mara lenta gt Pulse SLOW o RA SLOW en el modo de imagen fija Mi a fecha d Para ver im genes cuadro a cuadro gt Pulse f ox ipte d 208 PAUSE en el modo de imagen fija IO 9 BI Para parar gt Pulse STOP B mur sq m ge 1 Pulse AY para oca seleccionar E Para rebobinar l
72. hannels You cannot record or view scrambled channels view a channel other than the one selected for any type of recording VHF UHF B With a Cable Box You can record or view any channel including scrambled channels NOTE Channel selection must be made at the cable box You cannot e view a channel other than the one selected for any type of recording do a Timer recording of a channel unless you select it Cable Box at the cable box VHF Note to CABLE System Installer IN OUT UHF This reminder is provided to call the CABLE Cable TV System Installers attention to Article 820 40 of the NEC that provides guidelines for proper grounding and in particular specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical iB With a DSS Receiver You can record or view any channel including scrambled channels NOTE Channe selection must be made at the DSS Receiver You cannot view a channel other than the one selected for any type of recording doa Timer recording of a channel unless you select it at the DSS box NOTE The DSS receiver must be turned off to view OUTI programs from a cable box or antenna See the DSS manual for details unit unit unit VHF eii L n Connections continued Audio connections NW Unit gt Speaker At first be sure to slide the SPEAKER Switch to
73. i Stereo sound is recorded on the left and right audio tracks and on the video portion of a tape record and playback monaural broadcast main language or SAP Second Audio Program usually in a second language on the Hi Fi tracks for better quality monaural sound playback non Hi Fi tapes in monaural 34 For assistance call 1 800 211 PANA 7262 Speaker ON OFF System Allows you to turn off the speaker of the unit when it is connected to external audio equipment See page 10 1 Display MAIN MENU Display SET UP TV 2 S screen 1 Press AV 4 to select TV SET 2 Press SET to display SELECT 4 SET Select SPEAKER Y 1 Press AV to select O O VIDEO AMT OR a 2 Press SET to AUDIO ADJUST FM ANTENNA INT set ON or 1 ACTION SPEAKER ON O FF SELECT a v SET SET END ACTION 2 SELECT AV4 3 End setup Press ACTION twice In SPEAKER OFF condition the MUTE button and VOL do not function 35 gt Q lt Y 3 O D o O ze O c et O 5 V Chip Feature is Process of V Chip Feature The unit has built in V Chip Control which allows you to Enter C Setup Mis ode mis Setup gt Blocking block unwanted TV usage based on Motion Picture and TV Parental Guide ratings Enter Secret Code A 4 digit code must be entered to view a blocked program or change rating settings Display MAIN MENU Press ACTION
74. iDEO AGUST TUER T 2 Press SET to FM ANTENNA INT select INT EE E INTERNAL EE END ACTION EXT EXTERNAL whichever sounds the best End setup Press ACTION twice to exit 4 OL AA e areas 9000 Using FM Radio It is necessary to enter TV mode by pressing DVD TV when DVD mode is selected Display FM radio mode A Press TV FM on the remote or unit Select the FM number Press a O Oj NUMBERED key ACTION gt o lt t O O o O e um 4 M Et O 5 FH LO SM 1 9 to select a O preset station B NUMBERED see steps 2 and Key 3 on the previous page C SELECT To cancel press TV FM on the remote or unit AY C SET To select Audio Mode for FM Radio AUDIO Select STEREO or MONO k STEREO 4 Press AUDIO MONO repeatedly in FM FM 1 ELSME EX UE GI UN FM radio cannot be recorded on a Video cassette You may get better reception by repositioning the unit You cannot select FM Radio mode during playback or record or while MAIN MENU or PROGRAM screen is displayed 31 Tape Operation Repeat Play Set to see a recording over and over ky REPEAT ON To turn ON In play mode press PLAY REPEAT repeatedly to select REPEAT ON To turn OFF Repeat above to select REPEAT OFF PLAY REPEAT Playback repeats when tape end is reached or unrecorded portion over 30 seconds is detected To q
75. imer recordings 0 oyp 3 00 a m 4 00 a m K _ gt 1 00 a m 2 00 a m Head Cleaning Playing older or damaged tapes may eventually cause video heads to become clogged Head Clog Sensor During playback this screen appears if clogging is detected To remove screen press PLAY on the remote or unit Use dry type head cleaning cassette only Part No NV TCLSOPT is recommended Follow cleaning tape carefully Excessive use of tape can shorten head life If head clog symptoms END Exa persist contact your nearest Factory Service Center or authorized Service Center See Back Cover Display Picture Tube VIDEO HEADS MAY NEED CLEANING PLEASE INSERT HEAD CLEANING CASSETTE OR REFER TO MANUAL 27 inch measured diagonal 100 deflection Picture Tube VCR Video Recording System 4 rotary heads helical scanning system Audio Track 1 track Normal 2 channel Hi Fi Audio Sound Tuner Broadcast Channels VHF 2 13 UHF 14 69 CABLE Channels Midband A through 14 22 Superband J through W 23 36 Hyperband AA EEE 37 64 Lowband A 5 A 1 95 99 Special CABLE channel 5A 01 Ultraband 65 94 100 125 FM Radio Band range 87 5 108 1 MHz General Power Source 120V AC 60 Hz Power Consumption Approx 170 watts Power on Approx 5 5 watts Power off Television System EIA Standard NTSC color Speaker 2 pieces Operating Temperature 5 C 35 C 41 F 95 F Operating Humidity 1026
76. ionado en la preparaci n de Audio Fijaci n de f brica Si el idioma seleccionado en la preparaci n de Audio se utiliza durante la reproducci n los subt tulos no aparecer n Si se utiliza otro idioma durante la reproducci n los subt tulos aparecer n en el idioma seleccionado en la preparaci n de AUDIO English French Spanish OTHER Se puede seleccionar el otro idioma Seleccione MENUS English French Spanish Fijaci n de f brica ingl s OTHER Se puede seleccionar el otro idioma Seleccione LPCM DVD OFF Porel conector de salida de audio digital solamente sale PCM lineal de 48 kHz 16 bits Durante ta reproducci n del DVD grabado en el PCM lineal de 48 kHz 20 bits 24 bits o 96 kHz no sale audio digital Fijaci n de f brica PCM Durante la reproducci n del DVD grabado en el PCM lineal de 48 kHz 20 bits 24 bits o 96 kHz sale audio digital convertido a 48 kHz 16 bits La salida digital de audio PCM est restringida a 48 kHz 16bits o menos para proteger los derechos de autor Seleccione Dolby digital Bitstream Sale un flujo de bits Dolby digital AC 3 2ch 5 1ch fijaci n de f brica PCM Sale PCM 2ch de 48 kH2 16 bits Seleccione dts OFF No salida fijaci n de f brica Bitstream Sale un flujo de bits dts Seleccione Dynamic Range Compression OFF Se selecciona el margen de audio normal fijaci n de f brica ON Seleccione este aju
77. ke 2 vocals VOCAL V1 V2 9 VOCAL V1 gt VOCAL V2 gt VOCAL OFF BEA IAN HMM Video CD IR29L2R T 47 gt Q lt c O O Q O x O D E o 3 Disc Operation continued Using a title menu DVD only Some DVDs have more than one title i e movies If the disc offers a title menu you can select the desired title number Operation may vary according to the disc Display the title A 1 TITLE MENU isplay the title screen Press TITLE in Castles amp play mode i 5 Pressing TITLE again resumes Lovers Birds play from the scene when TITLE was first Example pressed Select the desired title 1 Press AW4 or TITLE MENU NUMBERED Keys o select 2 Press SET to B l rds start playing of the world Step 2 not necessary when using NUMBERED key s lt Example gt Using a DVD menu DVD only DVDs may offer a special menu This menu may include guides to unique contents audio subtitle languages etc Although contents and operation may vary the following steps show basic steps to using the menu a DVD MENU 1 SUBTITLE 2 AUDIO 3 ANGLE Example Display the DVD menu Press MENU in play mode Pressing MENU again resumes play from the scene when MENU was first pressed Select the desired item 1 Press AV 4 or DVD MENU 1 SUBTITLE NUMBERED 2 AUDIO Key s to lect 3 ANGLE
78. m Programming or set the On Timer and the Clock is not set If you press REC and a cassette is inserted with no record tab If you press STOP during a Timer Recording If you press PLAY FF REW or REC without a cassette inserted lf the unit is not in Stop mode or a cassette with record tab is not inserted two minutes before a Timer Recording is about to begin If head cleaning becomes necessary while playing back a tape If you press a function button other than STOP EJECT or POWER while the unit is in VCR Lock mode if you press PLAY or the unit reads data from a stained or scratched disc in DVD mode Also if the type of disc is other than DVD Video CD or CD If you press REC in DVD mode m o a o c r 2 o imm 1 o gt je pes the appropriate code number for the initial settings AUDIO SUB TITLE and or MENUS see page 51 Afar Bihari Fiji emm Abkhazian Afrikaans Ameharic Arabic Assamese Aymara Azerbaijani Bashkir Byelorussian Bulgarian Bengali Bangla Tibetan Breton Catalan Corsican Czech Welsh Danish German Bhutani Greek English Esperanto Spanish Estonian Basque Persian Finnish Faroese French Frisian Irish Scots Gaelic Galician Guarani Gujarati Hausa Hindi Croatian Hungarian Armenian Interlingua Indonesian Icelandic Italian Hebrew Japanese Yiddish Javanese Georgian
79. may result in a fire hazard or heat Do not put any foreign object on the disc tray damage to cassettes Keep magnetic objects such as speakers away from unit to For your protection avoid electrical interference a Never cover ventilation slots while unit is ON or 5 USING ACCESSORIES operate unit while placed on bed sofa rug or Use only accessories recommended by the manufacturer to other soft surface de b Avoid built in installation such as a book case avoid nisi ol fire Shock Or other nazards or rack unless properly ventilated 6 UNE vend ER er AAE COE Tae plug unit Use a clean dry chemically untr clo 5 HEEE ERA UPE CANGE E A OS gently remove dust or debris DO NOT USE cleaning fluids Do not place unit over or near a heater or aerosols or forced air that could over spray or seep into unit ce MAS and cause electrical shock Any substance such as wax Ha ee pee ls or inode adhesive tape etc may mar the cabinet surface Exposure to 75 humidity f unitis suddenly moved from s i greasy humid or dusty areas may adversely affect internal parts cold place to a warm one moisture may condense SERVICE in unit and on the tape causing damage Never subject unit to vibration impact or place it 1 DO NOT SERVICE PRODUCT YOURSELF so that the surface is tilted as internal parts may If after carefully following detailed operating instructions the be seriously damaged unit does not operate properly do not attempt to open o
80. n DVD mode or if there is no broadcast signal in TV or Playback mode Turn the power back on P 18 32 Correction Make sure your antenna system TV or CABLE is correctly set P 9 Completely insert Power Plug into an AC outlet No power Power turns itself off Monitor No picture or sound Poor picture with normal sound Poor sound with normal picture Poor TV reception No color or poor color Ghost multiple images TV programs cannot be watched Channel cannot be selected TV program cannot be recorded Timer recording cannot be performed No playback picture or the playback picture is noisy or contains streaks VCR cannot be controlled DVD Video CD CD Play fails to start even when PLAY is pressed Play starts but then stops immediately Picture is distorted during rapid advance or rapid reverse No rapid advance or rapid reverse play Play does not start even when title is selected Audio soundtrack and or subtitle language is not the one selected at the initial settings No subtitles Alternative audio soundtrack or subtitle language cannot be selected Angle cannot be changed 54 Set POWER button to ON Select INT on SP switch P 10 Adjust BRIGHTNESS SHARPNESS and PICTURE controls in the SET UP TV menu P 50 Adjust VOLUME control P 14 Adjust SHARPNESS and PICTURE controls in the SET UP TV m
81. nly 48 DVD Lock Feature 49 DVD Initial Settings 51 Selecting DISC LANGUAGES 51 Selecting DIGITAL AUDIO OUTPUT 52 Selecting STILL MODE 53 e Selecting TV MODE ess 53 Language Code List 56 o m D O Congratulations Loading the Batteries on your purchase of one of the most sophisticated and 1 Open the cover reliable products on the market today Used properly it will bring you and your family years of enjoyment Please fill in the information below The serial number is on the tag located on the back of your unit Date of Purchase Dealer Purchased From Dealer Address Dealer Phone No Model No Serial No Accessories C Remote Control VSQS1613 3 Close the cover Battery replacement caution Do not mix old and new batteries Do not mix alkaline with manganese batteries Prevent Accidental Tape Erasure Break off the tab O Batteries 2 AA To order accessories call toll free 1 800 332 5368 Record Playback Time dos Only use tapes with the VHS mark in this unit Tape Speed Type of Video Cassette Setting T60 T120 T160 SP 2 Hours Standard Play 2 Hours 49 Minutes LP 5 Hours Long Play 2 Hours 4 Hours 20 Minutes SLP Cover the hole Super Long Play 3 Hours 6 Hours 8 Hours with cellophane tape For assistance call 1 800 211 PANA 7262 Disc form
82. ompany PASC Factory Servicenter listed in the Service Directory Or call toll free 1 800 211 PANA 7262 to locate an authorized PASC Servicenter Carry in or mail in service in Puerto Rico can be obtained during the warranty period by calling the Panasonic Sales Company telephone number listed in the Servicenter Directory This warranty is extended only to the original purchaser A purchase receipt or other proof of the date of the original purchase is requires before warranty service is rendered This warranty only covers failures due to defects in materials and workmanship which occur during normal use and does not cover normal maintenance including but not limited to video and audio head cleaning The warranty does not cover damage which occurs in shipment or failures which are caused products not supplied by the warrantor or failures which result from accident misuse abuse neglect mishandling misapplication alteration modification faulty installation set up adjustments improper antenna inadequate signal pickup maladjustment of consumer controls improper operation power line surge improper voltage supply lightning damage commercial use such as hotel office restaurant or other business or rental use of the product or service by anyone other than a PASC Factory Servicenter or a PASC authorized Servicenter or damage that is attributable to acts of God LIMITS AND EXCLUSIONS There are no express warranties except as listed a
83. or easy button location If no button is pressed in 5 seconds the light goes out to conserve the battery EJECT button When this button is pressed in TV mode the tape is ejected This button is inoperative if pressed during recording If pressed in DVD mode the disc tray opens or closes HELP button When HELP is pressed a simple operation guide is be displayed to help you through an operation 64 For assistance call 1 800 211 PANA 7262 Front View of the unit If the disc cannot be removed first turn the unit power off Then prepare a rigid wire e g an extended paper clip etc and applying moderate force insert it straight into the hole at the base of the tray The tray will eject a little Now pull the tray al the way out and remove the disc Lor Disc Tray Cassette Compartment NT d See Page 18 See Pages 16 17 2000001000002009 S590909080809090208 999 92090909090902099980 59090909090909090 9 6909090909090908090 ago 596090909090909080 o 0909090909090808090 02000909000909086 290 o a859o90009000908080 0842054809080 o009000000000090909 rj 0900000909020 6909086 a ato 99989 93909 95999 9 9898999690909693 a _ _ __ gt po ae ee po A em Phones Jack Built In Speaker X 2 See page 14 Audio Video In Jacks REC See pages 22 40 See pages 17 33 POWER FAST FORWARD SEARCH See pages 8 12 14 18 See pages 8 16 STOP PLAY REPEAT S
84. page 45 DVD CHAPTER REPEAT TITLE REPEAT REPEAT OFF Video CD CD TRACK REPEAT DISC REPEAT REPEAT OFF SELECT a Y SET SET END DISPLAY gt Q lt o 5 O o O xe O 9 et O D Virtual Surround DVD only See page 52 OFF VSS1 Natural effect VSS2 Emphasized effect When VSS1 or VSS2 is selected a mark is displayed while Dolby Digita AC 3 DVDs are played back c C Play mode Video CD CD only See pages 44 and 45 SET PROGRAM PLAY program play END DISPLAY RANDOM PLAY random play normal pla Program Play Video CD CD You can program specific tracks and order of play Display MAIN MENU Press ACTION in stop mode Display DVD screen 1 Press AV4 to select DVD E 2 Press SET to SEtECT a SET SET Select ity MODE Dt SC LANGUAGE DIGITAL AUDIO OUTPUT STIU MODE TV MODE FIELD Letterbox Press AV apo apo dA select 2 Press SET to display Select PROGRAM PLAY 1 Press AV to select 2 Press SET to display SELECT a y SET SET END ACTION PLAY MODE RANDOM PLAY SET SET SELECT 4 v END gt ACTION Select desired track number Track numbers on disc are displayed 1 Press AV 4 to select AR A mi ser oe CD SELECT a Y SET c 2 Press SET to END ACTION ry select Repeat step 5 to select another track The selected track is added on the righ
85. ption END ACTION mode TEXT C2 TEXT C1 M CAP C2 Return to the normal screen Press ACTION three times Recording and Playing Back a Closed Caption Text Program Record Record normally Closed Caption Text signal if present is recorded automatically Playback Start playback Do above steps to select desired caption mode Closed Caption is This multi use system not only allows the hearing impaired to enjoy selected programs but also makes useful information from TV stations available to everyone EJECT CIP OPEMCLOSE LIGHT 1 ACTION 5 2 SELECT AV4 Closed Caption Modes From which to Choose Caption Mode CAP C1 or C2 A narration of selected TV programs is displayed Check TV program listings for C C Closed Caption broadcasts Caption Mode TEXT C1 or C2 The lower half of the screen will be blocked out When the TV station broadcasts information such as program listings it will appear in this space Caption Mode OFF Closed Caption Text narration will not be displayed NOTE The closed caption or text signal may be broadcast over C1 C2 or both Also text contents can vary so you may wish to try different settings When a disc supporting the closed caption is used the subtitle and closed caption may overlap In this case turn the subtitle or closed caption mode off See page 46 28 For assistance call 1 800 211 PANA 7262 Caption On Mute Feat
86. r 6 TO AVOID PERSONAL INJURY remove covers or make any adjustments not described in the Never place unit on support or stand that is not manual Unplug unit and contact a qualified service technician firm level and adequately strong 2 REPLACEMENT OF PARTS The unit could fall causing serious Make sure the service technician uses only parts specified by injury to a child or adult and the manufacturer or have equal safety characteristics as damage to the unit original parts The use of unauthorized substitutes may result Move any appliance and cart in fire electric shock or other hazards combination with care 3 SAFETY CHECK AFTER SERVICING Quick stops excessive force and 7 After unit is serviced or repaired request that a thorough safety uneven surfaces may cause objects to overturn check be done as described in the manufacturer s service Carefully follow alt operating instructions literature to insure video unit is in safe operating condition 2 Safety Precautions Mesures de s curit Warning To prevent fire or shock hazard do not expose this equipment to rain or moisture Caution To prevent electric shock match wide blade of plug to wide slot fully insert Avertissement Afin de pr venir tout risque d incendie ou de chocs lectriques ne pas exposer cet appareil a la pluie ou a une humidit excessive Attention Pour viter les chocs lectriques introduire la lame la plus large de la fiche dans la born
87. r Track ENDE Q 3 e WOrKS Only WI ISCS for which elapse Skipping Ahead gt play time is displayed during play t9 o Auto Power Off function Current playback position Enjoy Video CDs only with Skipping Back Skipping Ahead playback control without using menus lt Video CD only gt B To view Still Picture Pause Press PAUSE during play To release press PLAY DVD Video CD The unit will enter still picture mode CD The unit will enter pause mode 1 Do steps 1 4 previous page When menu appears press STOP 2 Press NUMBERED key s to select desired track play begins Check disc for track numbers Press 1 to start at beginning of disc a te view Frame Dy Frame AQVBER Press STOP and then MENU Now go to step 5 x an l DVD V ideo CD previous page Each button press advances picture one frame Press PAUSE in still mode To resume normal play press PLAY Hold button down for consecutive frame advance Whether pictures are advanced by frame or field is selected automatically Please read the disc jacket for operation information a To VIEW Slow Motion Remove disc and press unit POWER off when not in DVD Video CD use Press SLOW or SLOW in still mode Disc continues to rotate with menu displayed even after play is done Press STOP to clear menu display To release press PLAY when finished with menu Slow motion speed slow at
88. racking Continuously analyzes the signal and adjusts for optimum picture quality Manual Tracking Contro to reduce picture noise Use during Playback and Slow Motion mode to reduce picture noise Press the 3 or 6 NUMBERED key on the remote control or CHA Y on the unit until the picture clears up To return to Auto Tracking press POWER off then on again a few seconds later V Lock Control In Still mode the 3 or 6 NUMBERED key on the remote control or CH AY on the unit operate as a V Lock control to reduce jitter PanaBlack Picture Tube This unit uses a PanaBlack picture tube for better color reproduction and picture contrast A check list before you begin _ All connections are made See page 9 Your unit is plugged in C Cassette with record tab in place Insert a cassette r gt N The unit power comes on automatically L ID i Select Channel Press CH AV or NUMBERED keys To select LINE see bottom of this page OPENCLOSE LIGHT Qe E Select Recording speed see page 6 Press SPEED SP Standard Play LP Long Play SLP Super Long Play Selected speed is displayed 0 m o O O ES O im 1 c o 5 Start Recording Press REC To edit out unwanted portions press PAUSE to pause and resume recording You can not view another channel during recording E To stop gt Press STOP E One Touch Recording OT
89. ress ZERO 1 MIN in Play mode ZERO MIN 32 For assistance call 1 800 211 PANA 7262 pecial VCR Features Weak Signal Display ON OFF I check list before you begin C It is necessary to enter TV mode by When ON is selected picture is displayed even when pressing DVD amp TV before selecting broadcast signal is weak or nonexistent CH on the MAIN MENU 1 Display MAIN MENU Press ACTION Display SET UP CH screen 1 Press AV4 icm cram i to select CH O 2 Press SET to Tv cock Ext display SELECT a 4 SET SET 1 ACTION Select WEAK SIGNAL 4 DISPLAY 1 Press AV to ANTENNA CABLE 4 ooo select 2 SELECT VOR Pluss ae SET UP o 2 Press SET to 3 AV SELECT y SET SET set ON or END ACTION OF F 2 SET ON Picture is displayed regardless of signal condition and may not always be clearly visible OFF Screen turns solid black when signal is absent or weak e If unit is connected to equipment which has black back feature selecting ON will have no affect on the other equipment Return to the ATL Return to the normal screen Press ACTION twice VCR Lock All operations are prohibited except Timer recording and tape eject Useful for families with small children uonelado pasuerpy To turn ON REC In Stop mode hold e down REC on the unit without a cassette inserted for 7 seconds z To turn OFF Na
90. sette record tab is intact P 6 First turn the unit power off Then prepare a rigid wire e g an extended paper clip etc and applying moderate force insert it straight into the hole at the base of the tray The tray will eject a little Now pull the tray all the way out and remove the disc P 65 To enable Quick Play mechanism the VCR cylinder will rotate for about 5 minutes This reduces response time from Stop to Play mode and from Play to Rewind Search mode If you cannot resolve the problem please cal the Customer Satisfaction Center for product assistance at 201 348 9090 To locate an authorized servicenter please call toll free 1 800 211 PANA 7262 Warning and Instruction Displays NO CH FOUND PLEASE CHECK ANTENNA CABLE CONNECTION THEN PUSH CH UP KEY AGAIN PLEASE SET CLOCK BEFORE PROGRAMMING CHECK CASSETTE RECORD TAB TO CANCEL TIMER REC HOLD DOWN STOP KEY FOR APPROX 3 SEC NO CASSETTE PLEASE INSERT A CASSETTE PLEASE PREPARE FOR TIMER REC VIDEO HEADS MAY NEED CLEANING PLEASE INSERT HEAD CLEANING CASSETTE OR REFER TO MANUAL END PLAY KEY VCR LOCK ACTIVATED PLEASE CHECK THE TYPE OF DISCS AND STAIN OR SCRATCH OF A DISC IT IS PROHIBITED TO COPY DVD VIDEO CD CD TO VHS These displays will alert you of a missed operation or provide further instructions Caution If no active channels are found for CHANNEL MEMORY If you attempt to set or review a Timer Recording VCR Plus Syste
91. st volume volume A ES Press VOL B Using E Using the 100 key 100 key When selecting CABLE channels 100 to 125 with the NUMBERED keys first press the 100 key and then enter the remaining two digits E Rapid Tune Press R TUNE to display the last channel you were watching E Audio Mute Press MUTE to instantly mute the sound Press again to restore the previous sound level Phones Connect an earphone not supplied or headphones not supplied to the Phones Jack VCR Status amp Clock Display To display or remove the overlay Press DISPLAY Function Status Channel amp Call Letter Current Time Rec Time Remaining OTR mode only see page 17 Counter q T SAP ape Speed MONO Receivable Broadcast Types See page 15 Black Screen Display Whenever a blank section of a tape comes up in Play mode or when the selected channel has no broadcast signal with the Weak Signal Display ON OFF page 33 set to OFF the TV screen will turn solid black ed list before you begin C All connections are made See page 9 L Your unit is plugged in DISPLAY CH UP DOWN VOL UP 14 For assistance call 1 800 211 PANA 7262 MTS Broadcast TV Receivable Broadcast Types The following are possible broadcast types with their accompanying on Equipped with dbx TV Noise Reduction screen displays The signal being received is indicated with an for
92. ste para disfrutar de un sonido din mico incluso a bajo volumen Esto es muy til para escuchar tarde durante la noche Esta funci n s lo se activa con DVDs Dolby Digital AC 3 Seleccione V S S E sonido envolvente virtual crea el efecto de sonido procedente de altavoces que parece que est n en la parte de atr s incluso cuando ha conectado s lo a un sistema estereo de 2 canales S lo Dolby Digital AC 3 DVD OFF No efecto de sonido envolvente virtual Preajuste de f brica VSS 1 Efecto natural VSS 2 Efecto acentuado Seleccion de STILL MODE AUTO Durante ei modo de imagen fija se seleccionar n autom ticamente Campo fijo o Marco fijo Fijacion de fabrica FIELD Seleccione este ajuste cuando ocurra distorsi n en las imagenes incluso cuando se haya seleccionado AUTO FRAME Marco fijo es siempre seleccionado Seleccionar este ajuste cuando no se puedan ver claramente texto peque o o patrones finos incluso cuando est seleccionado AUTO Selecci n de TV MODE Pan amp Scan Datos de la pantalla ancha de v deo son reproducidos en el estilo Pan amp Scan la parte derecha e izquierda de la pantalla son recortadas Preajuste de f brica Datos de v deo no formateados en Pan amp Scan ser n reproducidos en el estilo letterbox Datos de la pantalla ancha de v deo son reproducidos en el estilo Letterbox la parte de arriba y abajo de la pantalla tienen un margen negro
93. t Blocking If LOCK menu is not displayed do Enter Secret Code steps on page 36 Select TV PARENTAL STATUS WOTIOR PICT STATUS OFF n 1 Press AV HANGE UI to select C a Dvo tock rig OFF ns 2 Press SET HAN IN P a SELECT a SET to set ON END ACTION or OFF If you select TV PARENTAL STATUS B ON 3 V Chip Control is activated OFF gt V Chip Control is deactivated Select CHANGE SETTINGS NOTION PICT STATUS OFF 1 Press AV STATUS to select 2 Press SET CHANGE SETTINGS SELECT a y SET SET to display END ACTION Select VIEW NR PROGRAMS 1 Press AV to select 2 Press SET to set YES or NO NR Not Rated PROGRAMS Some TV shows such as news sports weather bulletins emergency information usually have no ratings Select ratings to be blocked See next page l 1 Repeatedly B Press AV4 Mh to select SELECT ae OON SET 2 2 Press SET END ACTION to set Ratings highlighted in RED will be You may select from standard TV rene a is those ratings chart 1 or customize to a GREEN e T b specific content rating chart 2 blocked will not be Exit this mode Press ACTION three times For assistance call 1 800 211 PANA 7262 TV PARENTAL GUIDE RATINGS Process of V Chip Control Feature FOR ALL CHILDREN Content specifically geared to young viewers ages 2 6 FOR AGE 7 AND OLDER Blocking Message
94. t side Start PROGRAM PLAY 1 Press AV4 P gt j n to select 18 SHO START Hog 2 Press SET Play begins in the programed sequence To cancel press STOP during play and then press ADD DLT STAAT SELECT a a SET SET END ACTION 44 VI check list before you begin Video CD or CD is inserted in DVD mode 1 ACTION ADD DLT 2 SELECT AV Up to 18 tracks can be programmed e d or P depending on disc indicates additional PROGRAM PLAY screen Press AW for next or previous screen To clear the last program one by one Press AV 4 b to move to CLEAR LAST and press SET Pressing ADD DLT on remote control also clears last program To clear all programs Press AW 4b to move to CLEAR ALL and press SET Programs are also cleared when the power is turned off or the disc is removed PROGRAM REPEAT PLAY Press PLAY REPEAT in PROGRAM PLAY mode and AV to select PROGRAM REPEAT To cancel repeat this to select REPEAT OFF For assistance call 1 800 211 PANA 7262 Random Play Video CD CD Tracks are played in a random order 1 Repeat steps 1 3 on the previous page Select RANDOM PLAY 2 m 1 Press AV TEE c op to select PROGRAM PLAY rv 2 Press SET Random play begins SELECT a Y SET SET To cancel press STOP EL during play and then press ADD DLT a PLAY ADD DLT STOP SELECT AV Repe
95. tar da ados de 300 ohmios paan de TVIDVDIVCR Conexiones de TV cable B Sin un decodificador de TV cable Antena Parte trasera de Podr o la combinaci n grabar o ver canales sin codificar Cable TV de TV DVD VCR No Podr grabar o ver canales codificados VHE ver otro canal que no sea el seleccionado para cualquier tipo de UHF grabaci n B Con un decodificador de TV cable Podr grabar o ver cualquier canal incluso los canales codificados NOTA El canal deber ser seleccionado en el decodificador de TV Antena e Cable TV Parte trasera de cable la combinaci n de TV DVD VCR No Podr Caja convertidora ver otro canal que no sea el seleccionado para cualquier tipo de de TV por cable grabaci n VHF hacer una grabaci n con temporizador de un canal a menos que lo IN OUT UHF seleccione en el decodificador de TV cable U Para ver y grabar un canal codificado no codificado Sintonice el canal del Registrador de la combinaci n de VCR TV en el canal de salida de la caja convertidora de televisi n por cable por ejemple el canal 3 Despu s seleccione en el decodificador de TV cable el canal que se quiera ver o grabar B Con un receptor DSS Podr grabar o ver cualquier canal incluso los canales codificados NOTA El canal deber ser seleccionado en el receptor DSS No Podr Antena o Cable TV Satellite Parte trasera de ver otro
96. true MTS reproduction k mark while the selected audio mode is indicated with an arrow To dbx TV Noise Reduction is required for change the audio mode for these broadcasts follow the Select Audio good stereo separation and audio fidelity Mode ton TV MISMO SEO DE OW dbx is a registered trademark and is Display the broadcast signal licensed by dbx Technology Licensing being received Press DISPLAY O STOP 11 00PM MTS Stereo and SAP broadcast 9 d Multi channel Television Sound Stereo o DEA main language and Secondary Audio O MONO Program sub language broadcasts are O both being received simultaneously ke Select the STEREO or SAP audio mode Sp COM CHO y 0 12 4 MTS Stereo broadcast o dh 2 Multi channel Television Sound Stereo E broadcast Select STEREO audio mode If stereo broadcast is weak and the display flickers select MONO audio mode for possibly better results MONO STOP 11 00PM seo AP SAP broadcast ROADS Secondary Audio Program sub language Select SAP audio mode for the sub language MONO broadcast Normal monaural sound broadcast Sp OMN 0 12 4 STEREO SIP SAP MONO Select Audio Mode for TV Viewing Press AUDIO to select the desired audio mode as described above Arrow shows selection Each press of AUDIO will change the audio mode as shown below SAP is selected with first press of AUDIO
97. uickly return to a specific tape counter location Display the Counter Press DISPLAY during playback 11 Cy hy 10 Reset to 0 00 00 Reset to 0 00 00 id Press COUNTER RESET at the desired position 080 ON 3 Continue playback rewind or fast forward 4 STOP 11 00 PM n Return to 0 00 00 Press ZERO zero Min MIN in Stop mode The unit will go into FF or REW mode and stop at the last point the Counter was set to 0 00 00 Auto Operation Functions B Auto Shut Off No broadcast signal in TV or Playback mode for 5 minutes Power turns off automatically This feature is deactivated if any button is pressed during the above mode B Auto Playback Insert a tape in Power off mode Power turns on automatically Playback begins automatically if a tape has no record tab B Auto Rewind A tape reaches its end gt Rewind begins gt Stop automatically B Playback Auto Eject Repeat Play is OFF A tape has no record tab reaches its end 3 Rewind begins 3 Ejects automatically E Memory Rewind off Press POWER in REW mode gt Rewind is completed gt Power turns off automatically Your unit is equipped with several time saving features as well as convenient automatic functions which make tape operation easier than ever 1 DISPLAY 2 COUNTER RESET PLAY REPEAT 4 zERO 1MIN One Minute Skip The unit fast forwards over 60 seconds of recorded tape Skip over 1 minute P
98. ure Closed Caption narration if available is displayed when MUTE button is pressed for silence 1 Display MAIN MENU Press ACTION Display SET UP TV screen 1 Press AV gt oo Toc 7 x t select TV Joc SELECT a y 4 SET SET Display CAPTION screen 1 Press AV to select X C 2 Press SET to a display CAPT ION INPUT SELECT TUNER VIDEO ADJUST ADIR ADJUST ANTENNA INT SPEAKER ON SELECT 4 END ACTION SET SET Select CAPTION MODE 4 a 1 Press AY to CAPTION o select coon Mule CAP 2 Press SET a repeatedly to PEE select OFF END ACTION Select CC ON MUTE w 1 Press AY to CAPTION o select AOS DADO 2 Press SET 2 repeatedly to SELECT a SET select desired END ACTION caption mode Each press of SET will change the display as shown at left The caption may be broadcast over a NO CAP C1 CAP BM CAP C1 or C2 Al Ds Beuniihengmal to the normal screen Press ACTION three times y 2 34 Mute sound display sound display po closed captioning gt Press MUTE to mute the sound To cancel press MUTE again When a disc supporting the closed caption is used the subtitle and the closed caption may overlap In this case turn the subtitle or caption on mute mode off See page 46 29 gt Q lt 9 O O o oO m Q et O 3
99. y Digital ac 3 gt Amplifier gt Speaker or dts digital theater systems When DVDs recorded in Dolby Digital or dts are played Dolby Digital bitstream or dts bitstream is output from the unit OPTICAL digital audio output connector or COAXIAL digital audio output connector When the unit is connected to a Dolby Digital decoder or dts decoder you can enjoy theater quality audio in your home An optical digital audio cable or coaxial audio cable both optional is required when an optional Dolby Digital decoder or dts decoder is used Notes on connecting an optical digital audio cable optional Remove dust protection cap from optical digital audio output Firmly connect the cable to the connector Always reattach the dust protection cap when connector is not in use Optical Coaxial o Optical digital audio Coaxial audio cable cable optional or optional To optical digital audio To coaxial digital audio input connector input connector Dust protection cap Decoder with Dolby Digital AC 3Ydts processing optional Caution for optical coaxial digital 4 audio output connector Amplifier on When connecting an amplifier with an optical coaxial digital input speaker connector which does not contain the Dolby Digital AC 3 or dts decoder be sure to select PCM at Dolby Digital and OFF ue at dts of the DVD initial setting DIGITAL AU

Download Pdf Manuals

image

Related Search

Panasonic PV DM2799 Manual panasonic mini dv camcorder manual pv-gs29 panasonic mini dv camcorder manual panasonic dvcpro hd p2 manual

Related Contents

        IDT IDT2305 handbook            

Copyright © All rights reserved.
DMCA: DMCA_mwitty#outlook.com.