Home

CASIO DATA PROJECTOR XJ-M245/XJ-M255 UsersGuide

1. Operation on a computer upgraded to Windows 7 Windows Vista or Windows XP from another operating system is not supported Operation on a computer running Windows XP Professional x64 Edition is not supported To install EZ Converter FA 1 Place the CD ROM that comes with the projector into your computer s CD ROM drive This will automatically display the CD ROM menu screen 2 On the menu screen click the Install button to the right of EZ Converter FA Follow the instructions on the dialog boxes that appear on the screen If you are running Windows 7 and the User Account Control message appears while installing click Yes f you are running Windows Vista and the User Account Control message appears while installing click Allow If you are running Windows XP and the message shown below appears while installing click Continue Anyway Software Installation The software you are installing has not passed Windows Logo testing to verity its compatibaity wath Windows XP Tell me why this testing is important Continuing your installation of this software may impair or destabilize the correct operation of your system either immediately ot in the future Microsoft strongly recommends that you stop this installation now and contact the software vendor for software that has passed Windows Logo testing To install ArcSoft MediaConverter 3 for CASIO Projector 1 Place t
2. 2 Select either manual or auto scroll and configure other slideshow settings For more information see Configuring Viewer Settings page 34 3 Use the cursor keys to move the highlighting to Slides and then press the ENTER key This will project a file menu 4 Use the cursor keys to move the highlighting to the folder that contains the image files that make up your slideshow and then press the ENTER key 5 Use the cursor keys to move the highlighting to the image file you want to start the slideshow from and then press the O key This will project the selected image file and start the slideshow 27 6 Perform the operations described below as required To do this Perform this operation Scroll back to the previous image Press the lt key Scroll forward to the next image Press the gt key Pause the slideshow This option is available only 1 Press the FUNC key when Auto is specified for the Image Switching 2 On the function menu that appears use the cursor setting on the setup menu keys to move the highlighting to Pause and then press the ENTER key Rotate the image right 90 degrees Press the A key Rotate the image left 90 degrees Press the O key The following operations can be performed while a slideshow is paused To do this Press this key Scroll back to the previous image 4 Scroll forwa
3. move the highlighting to that folder and then press the ENTER key 3 Use the cursor keys to move the highlighting to the movie file you want to play back and then press the ENTER key or the O key This will start playback of the selected movie file 4 Perform pause and other operations as required For details about operations you can perform during projection of a movie file see Operations during Movie File Projection page 30 To stop movie file playback and return to the file menu press the ESC key When playback reaches the end of the movie file the projection image will show a still image of the final movie frame 5 To return to the file menu after movie playback is complete press the ESC key 29 Operations during Movie File Projection The operations described below can be performed while a movie file is playing or paused To do this Perform this operation Pause and resume movie playback Press the ENTER key A pause icon EB is displayed in the upper left corner of the projection screen while movie projection is paused Re play the file from the beginning 1 Press the FUNC key 2 On the function menu that appears use the cursor keys to move the highlighting to Play from Beginning and then press the ENTER key Display the play time in the upper left corner of the projection screen 00 00 15 2 00 01 28 Total movie play time Elapsed movie play time
4. Data Projector s USB Functions page 5 of this manual 8 After configuring all the settings you want click OK This will start playback of the PowerPoint file and start converting it to an ECA file or PtG file The Conversion complete message will appear when file conversion is complete f you have other PowerPoint files you want to convert repeat steps 4 through 7 To check the contents of an ECA file or PtG file perform the procedure under To play back an ECA file or PtG file on your computer page 16 9 After you are finished converting all the files you want click the close button in the upper right corner of the EZ Converter FA window 15 To specify the screen resolution of the ECA file or PtG file 1 2 3 Right click the left side of the EZ Converter FA window On the menu that appears click Output Resolution On the sub menu that appears select the resolution you want The following shows the resolution settings that should be used for each Data Projector model XJ M145 XJ M155 1024 x 768 800 x 600 XJ M245 XJ M255 1280 x 800 1280 x 768 1024 x 768 2 1 If you cannot select the 1024 x 768 resolution select 800 x 600 2 If you cannot select the 1280 x 800 or 1280 x 768 resolution select 1024 x 768 The setting you select here remains in effect until you change it To specify the maximum animation display time 1 2 3 Right click the left side
5. Page Selection The operations described below can be performed while the page menu is being projected To do this Perform this operation Re start file playback from a Use the cursor keys to move the highlighting to the thumbnail of the page particular page where you want to start playback of the presentation and then press the ENTER key Scroll to the next screen Press the O key Scroll to the previous screen Press the A key Stop playback and return to the file Press the ESC key menu 25 Projecting an Image File Use the Viewer Slide Mode to project image files You can also group image files and project them ina specific sequence as a slideshow To project an image file 1 Connect the memory device where the image file you want to project is stored to the Data Projector This will project the main Viewer window If the main Viewer window does not appear press the INPUT key and select USB as the input source 2 Use the cursor keys to move the highlighting to Slides and then press the ENTER key This will project a file menu like the one shown below f the image file you want to project is located in a particular folder use the cursor keys to move the highlighting to that folder and then press the ENTER key 3 Use the cursor keys to move the highlighting to the image file you want to project and then press the ENTER key This will proj
6. Place the document whose image you want to project onto the document camera s document stage Be sure to place the document in the center of the stage and do not let any part of the document extend off the edges of the stage When placing a landscape orientation document onto the document stage the top of the page should face towards the camera stand Initially the monitor image will be projected and so the image will appear a bit fuzzy When the document camera senses that the document on the stage is not being moved it will record its image and switch from the fuzzy monitor image to a high resolution image recorded image automatically AAA E Rough Monitor Image Recorded Image 5 Now you can replace the document currently on the stage with another one This will switch to the recorded image of the next document automatically O Note Step 5 above is what happens while the Data Projector s YC Camera application is configured with its initial default settings The recorded image will not switch automatically if you have changed the Operation Mode setting of the YC Camera application to Manual Capture For more information see YC Camera Application Setup Menu Contents on page 49 42 YC Camera Application Operations This section explains the various types of projection operations you can perform with the YC Camera application and how to configure YC Camera application settin
7. do not appear in the file menu Viewer may be in a mode other than the Presentation Mode To enter the Presentation Mode highlight Presentation on the main Viewer window page 21 and then press the ENTER key Image files do not appear in the file menu Viewer may be in a mode other than the Slide Mode To enter the Slide Mode highlight Slides on the main Viewer window page 21 and then press the ENTER key The files may not be of a format that can be recognized by the Data Projector Image files require the following file name extensions jpg jpeg jpe or bmp For details about image file formats supported for Data Projector playback see About the Data Projector s USB Functions page 5 Movie files do not appear in the file menu Viewer may be in a mode other than the Movie Mode To enter the Movie Mode highlight Movie on the main Viewer window page 21 and then press the ENTER key The files may not be of a format that can be recognized by the Data Projector Movie files require the file name extensions avi For details about the movie file format supported for Data Projector playback see About the Data Projector s USB Functions page 5 On the Slide Mode file menu question marks appear in place of thumbnails Question marks are displayed in place of thumbnails of images that cannot be projected by Viewer JPEG files larger than 8MB etc cann
8. fast reverse operation and resume normal playback ENTER Stop playback and return to the file menu ESC File Menu Operations This section explains operations you can perform while the file list is displayed in the Presentation Slide or Movie Mode List View and Icon View There are two different views for the Viewer file menu a list view and an icon view List view Icon view List view This view lists the names of the folders and files on a memory device This is the initial default view for the Presentation Slide or Movie Mode Icon view This view shows both icons and names for the folders and files on a memory device Thumbnails are displayed for all of the files that can be played back by the Viewer B 31 To toggle the file menu between the list view and icon view Press the FUNC key and then the ENTER key O Note You can specify either the list view or icon view as the default view For more information see Configuring Viewer Settings on page 34 To scroll the file menu Press the O key to scroll forward and the key to scroll back To open a folder Use the cursor keys to move the highlighting to the folder you want to open and then press the ENTER key To exit the current folder and move up to the next level Press the ESC key 32 To view file properties 1 Display the file menu list view 2 Use the V and A keys to move the highlighting to the file whose
9. restricted and output from such a program is covered only if its contents constitute a work based on the Library independent of the use of the Library in a tool for writing it Whether that is true depends on what the Library does and what the program that uses the Library does 1 You may copy and distribute verbatim copies of the Library s complete source code as you receive it in any medium provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty keep intact all the notices that refer to this License and to the absence of any warranty and distribute a copy of this License along with the Library You may charge a fee for the physical act of transferring a copy and you may at your option offer warranty protection in exchange for a fee 2 You may modify your copy or copies of the Library or any portion of it thus forming a work based on the Library and copy and distribute such modifications or work under the terms of Section 1 above provided that you also meet all of these conditions a The modified work must itself be a software library b You must cause the files modified to carry prominent notices stating that you changed the files and the date of any change c You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this License 61 d If a facility in the modified Library refers to a function or a t
10. 80 x 720 30fps for 640 x 480 and 320 x 240 e Audio Format ADPCM CASIO J Refer to the following for details For more information about this Refer to this section of this manual Converting PowerPoint files to files that can be Using EZ Converter FA to Convert PowerPoint Files to ECA or played back with the Data Projector PtG Files page 12 Memory devices that can be connected to the Connecting a Memory Device to the Data Projector page 19 Data Projector s USB port Operations for projecting the contents of files Using Viewer to Project the Contents of a File on a Memory on a memory device Device page 19 Document Camera CASIO YC 400 YC 430 You can connect a CASIO Document Camera to the Data Projector s USB port and project the images of documents placed on the document stage of the YC 400 YC 430 For more information see Performing a Presentation Using the YC 400 YC 430 Document Camera on page 40 Graphing Calculator CASIO fx 9860G Series You can connect a CASIO fx 9860G series graphing calculator to the Data Projector s USB port and project calculator screen images with the projector For details see Projecting the Screen Image of a Graphing Calculator page 51 What happens when you connect a USB device while the Data Projector is turned on depends on the current configuration of the Data Proje
11. B interface The following are supported memory devices USB memory Memory cards A commercially available USB card reader is required to connect a memory card to the Data Projector USB storage class USB Mass Storage Class compatible digital cameras Ss Important The Data Projector does not support connection of all commercially available USB memory devices memory cards and digital cameras For details about specific supported memory devices contact your original retailer or your nearest authorized CASIO dealer To connect USB memory to the Data Projector Connect USB memory to the Data Projector s USB port as shown below 19 To connect a memory card to the Data Projector 1 Load the memory card into a USB card reader s card slot For details about how to load a memory card into the USB card reader see the user documentation that comes with the reader 2 Connect the USB card reader to the Data Projector s USB port To connect a digital camera to the Data Projector 1 If necessary configure the digital camera s USB mass storage class setting 2 Turn off the digital camera and connect a USB cable to it 3 Connect the other end of the USB cable Type A connector to the Data Projector s USB port 4 Turn on the digital camera O Note For details about steps 1 2 and 4 see the user documentation that comes with your digital camera 20 Starting Projection with Viewer If the Data
12. DATA PROJECTOR i XJ M145 XJ M155 XJ M245 XJ M255 Data Projector USB Function Guide Be sure to read the precautions in the separate Setup Guide Be sure to keep all user documentation handy for future reference Microsoft Windows Windows Vista and PowerPoint are registered trademarks or trademarks of Microsoft Corporation in the United States and other countries ArcSoft and the ArcSoft logo are trademarks or registered trademarks of ArcSoft Inc in the United States and other countries Macintosh Mac OS and QuickTime are trademarks or registered trademarks of Apple Inc in the United States and other countries Other company and product names may be registered product names or trademarks of their respective owners The contents of this manual are subject to change without notice Copying of this manual either in part or its entirety is forbidden You are allowed to use this manual for your own personal use Any other use is forbidden without the permission of CASIO COMPUTER CO LTD CASIO COMPUTER CO LTD shall not be held liable for any lost profits or claims from third parties arising out of the use of this product the included software or this manual CASIO COMPUTER CO LTD shall not be held liable for any loss or lost profits due to loss of data due to malfunction or maintenance of this product or any other reason The sample screens shown in this manual are for illustrative purposes only and m
13. E USE OR INABILITY TO USE THE LIBRARY INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES 65 END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Libraries If you develop a new library and you want it to be of the greatest possible use to the public we recommend making it free software that everyone can redistribute and change You can do so by permitting redistribution under these terms or alternatively under the terms of the ordinary General Public License To apply these terms attach the following notices to the library It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty and each file should have at least the copyright line and a pointer to where the full notice is found one line to give the library s name and an idea of what it does Copyright C year name of author This library is free software you can redistribute it and or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation either version 2 1 of the License or at your option any later version This library is distributed in the hope that it will be useful but WITHOUT ANY WARRANTY without even the impl
14. General Public License The Program below refers to any such program or work and a work based on the Program means either the Program or any derivative work under copyright law that is to say a work containing the Program or a portion of it either verbatim or with modifications and or translated into another language Hereinafter translation is included without limitation in the term modification Each licensee is addressed as you Activities other than copying distribution and modification are not covered by this License they are outside its scope The act of running the Program is not restricted and the output from the Program is covered only if its contents constitute a work based on the Program independent of having been made by running the Program Whether that is true depends on what the Program does 1 You may copy and distribute verbatim copies of the Program s source code as you receive it in any medium provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty keep intact all the notices that refer to this License and to the absence of any warranty and give any other recipients of the Program a copy of this License along with the Program You may charge a fee for the physical act of transferring a copy and you may at your option offer warranty protection in exchange for a fee 2 You may modify your copy or copies of the Prog
15. H DAMAGES 57 END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Programs If you develop a new program and you want it to be of the greatest possible use to the public the best way to achieve this is to make it free software which everyone can redistribute and change under these terms To do so attach the following notices to the program It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty and each file should have at least the copyright line and a pointer to where the full notice is found one line to give the program s name and an idea of what it does Copyright C yyyy name of author This program is free software you can redistribute it and or modify it under the terms of the GNU General Public License as published by the Free Software Foundation either version 2 of the License or at your option any later version This program is distributed in the hope that it will be useful but WITHOUT ANY WARRANTY without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE See the GNU General Public License for more details You should have received a copy of the GNU General Public License along with this program if not write to the Free Software Foundation Inc 51 Franklin Street Fifth Floor Boston MA 02110 1301 USA Also add information on how to contact you by electronic and paper mail If the progr
16. Press the O key Each press of the O key toggles the time indicator between show and hide Fast forward Press the gt key Fast reverse Press the lt key Stop movie file playback and return to the file menu Press the ESC key For details about fast forward and fast reverse see To perform fast forward and fast reverse during movie playback below To perform fast forward and fast reverse during movie playback 1 Perform steps 1 through 3 under To project a movie file page 29 to start playback of the movie file 2 Press the gt key for fast forward or the lt q key for fast reverse This starts the corresponding operation and displays an icon for fast forward GEE for fast reverse in the upper left corner of the projection screen Each press of the P or lt 4 key cycles the corresponding operation between three speeds This icon Indicates this Fast forward 10 second increment 6X fast forward 60 second increment 60X fast forward 10 minute increment Fast reverse 10 second increment 6X fast reverse 60 second increment 60X fast reverse 10 minute increment Movie playback stops automatically when a fast forward or fast reverse operation reaches the last or the first frame of the movie file 30 3 Perform the operations described below as required To do this Press this key Quit a fast forward or
17. Projector is already turned on when you perform the procedure under Connecting a Memory Device to the Data Projector page 19 to connect USB memory to the Data Projector the main Viewer window shown below will be projected Presentation Slides Movie Viewer Setup Menu Item Function Refer to Presentation Enters the Presentation Mode for Projecting an ECA File or PtG File page 23 projection of ECA or PtG files Converting a PowerPoint File to an ECA File or PtG File page 14 Slides Enters the Slide Mode for projection of Projecting an Image File page 26 images files Movie Enters the Movie Mode for projection Projecting a Movie File page 28 of movie files Viewer Setup Displays the Viewer setup menu Configuring Viewer Settings page 34 O Note If Viewer projection does not start automatically at this time perform the following steps to select USB as the input source 1 Press the INPUT key This displays the input source selection screen 2 Use the A and V keys to move the highlighting to USB and then press the ENTER key 21 Drive Menu Entering the Presentation Mode Slide Mode or Movie Mode while there are multiple memory devices connected to the Data Projector multiple USB memory devices connected via a USB hub multiple memory cards loaded in the memory card reader connected to the Data Projector etc will cause a menu like t
18. Setting Name Description Operation Mode Specifies whether recording of documents placed on the document stage of the document camera should be performed automatically or manually Auto Capture Automatically records the image of a document whenever it is placed on the document stage Manual Capture Requires manual release of the shutter each time a document is placed on the document stage Monitor Screen Switches the monitor screen orientation Orientation Horizontal Records the document on the document stage horizontally Vertical Records the document on the document stage vertically White Enhancement Specifies whether or not white enhancement should be performed on the projected image Off Turns off white enhancement On Turns on white enhancement Auto The decision whether or not to perform white enhancement is made automatically in accordance with the image being recorded Ss Important White enhancement cannot be performed while the Skew Correction setting is Off 49 Setting Name Skew Correction Description Specifies whether or not skew correction should be performed automatically on the projected image On Turns on automatic skew correction Off Turns off automatic skew correction Project Document Monitor Image Specifies whether or not the camera s monitor image should be projected when a document is removed from the document stage On Displays th
19. Software for updating the firmware of the YC 400 Multi Projection Camera Ss Important The latest version of the computer software included on the CD ROM that comes with this product is available for download at the CASIO website URL below http www casio com support driverdownloads Be sure to download and use the latest version of the software Home Support Drivers Downloads Projectors Minimum System Requirements Operating System Microsoft Windows 7 Windows Vista SP2 or Windows XP SP3 Computer IBM PC AT or compatible that conforms to the following conditions Windows 7 Windows Vista or Windows XP pre installed PowerPoint 2003 2007 or 2010 installed to use EZ Converter FA CPU Pentium M 1 6GHz or higher CPU recommended for your computer s operating system Memory The amount of memory recommended for operating system being run Display Full color display with resolution of at least 1024 x 768 that is supported by above operating systems and the computer being used Input Device Keyboard or other pointing device mouse supported by the above operating system or equivalent device Any other requirements as recommended by the operating system you are using Normal operation may not be possible under certain hardware configurations Operation is not supported on a computer running Windows 2000 NT Me 98SE 98 95 or 3 1 or on a Macintosh or Mac OS computer
20. This License Agreement applies to any software library or other program which contains a notice placed by the copyright holder or other authorized party saying it may be distributed under the terms of this Lesser General Public License also called this License Each licensee is addressed as you A library means a collection of software functions and or data prepared so as to be conveniently linked with application programs which use some of those functions and data to form executables The Library below refers to any such software library or work which has been distributed under these terms A work based on the Library means either the Library or any derivative work under copyright law that is to say a work containing the Library or a portion of it either verbatim or with modifications and or translated straightforwardly into another language Hereinafter translation is included without limitation in the term modification Source code for a work means the preferred form of the work for making modifications to it For a library complete source code means all the source code for all modules it contains plus any associated interface definition files plus the scripts used to control compilation and installation of the library Activities other than copying distribution and modification are not covered by this License they are outside its scope The act of running a program using the Library is not
21. able of data to be supplied by an application program that uses the facility other than as an argument passed when the facility is invoked then you must make a good faith effort to ensure that in the event an application does not supply such function or table the facility still operates and performs whatever part of its purpose remains meaningful For example a function in a library to compute square roots has a purpose that is entirely well defined independent of the application Therefore Subsection 2d requires that any application supplied function or table used by this function must be optional if the application does not supply it the square root function must still compute square roots These requirements apply to the modified work as a whole If identifiable sections of that work are not derived from the Library and can be reasonably considered independent and separate works in themselves then this License and its terms do not apply to those sections when you distribute them as separate works But when you distribute the same sections as part of a whole which is a work based on the Library the distribution of the whole must be on the terms of this License whose permissions for other licensees extend to the entire whole and thus to each and every part regardless of who wrote it Thus it is not the intent of this section to claim rights or contest your rights to work written entirely by you rather the intent is to exercise the
22. am is interactive make it output a short notice like this when it starts in an interactive mode Gnomovision version 69 Copyright C year name of author Gnomovision comes with ABSOLUTELY NO WARRANTY for details type show w This is free software and you are welcome to redistribute it under certain conditions type show c for details The hypothetical commands show w and show c should show the appropriate parts of the General Public License Of course the commands you use may be called something other than show w and show c they could even be mouse clicks or menu items whatever suits your program You should also get your employer if you work as a programmer or your school if any to sign a copyright disclaimer for the program if necessary Here is a sample alter the names Yoyodyne Inc hereby disclaims all copyright interest in the program Gnomovision which makes passes at compilers written by James Hacker signature of Ty Coon 1 April 1989 Ty Coon President of Vice This General Public License does not permit incorporating your program into proprietary programs If your program is a subroutine library you may consider it more useful to permit linking proprietary applications with the library If this is what you want to do use the GNU Lesser General Public License instead of this License 58 GNU LESSER GENERAL PUBLIC LICENSE Version 2 1 February 1999 Copyrigh
23. amera Application Operations cccccccccceeeeeeeeeeeeeeeeeeeeeeeeeeeeees 43 YC Camera Application Projection Operations cccccccceeeeeeeeeeeeteeeeeeeeseeeneeeeeees 43 Configuring YC Camera Application Setup Menu Settings eeeeeesseeeeseeeeeneees 47 Projecting the Screen Image of a Graphing CalCulator ccccssssssseeescsessseeeeseeenssseessseees 51 To project the screen image of a graphing calculator eee ceeeseeeeneeeeseeeeesneeteees 51 This manual explains function and operations when any one of the following devices is connected to the USB port of the CASIO Data Projector USB memory device CASIO Multi Projection Camera YC 400 YC 430 CASIO Graphing Calculator fx 9860G Series O Note Use of a memory device page 5 requires separate purchase of commercially available USB memory or other memory Use of a CASIO Multi Projection Camera or graphic scientific calculator requires separate purchase of the required device by you Note that these products may not be available in some geographic areas For full details contact the retailer where you purchased this Data Projector or authorized CASIO dealer Terms and Conventions In this manual there are many procedures that require parallel operations on the Data Projector and your computer The following are special terms and conventions used in this manual to differentiate between the Data Projector and computer Projec
24. ay differ somewhat from the screens actually produced by the product CASIO About this manual sssssssnsnnunnnnnnnnnnnnnnnnnnnnnnnnnnnn nnmnnn 4 Terms and Conventions ccccccseceecseeeeeseeeeeeeeeeeseeneeeseseneseeeesseeenasenesesceeeeseeeeeseeeeseeees 4 About the Data Projector s USB Functions 5 Connecting a USB Device to the Data Projector 7 Installing the SOftWArEC cccccssssseeeesesseeseeeseeeenseeeeeeees 8 Minimum System Requirement c ccc eeeceeseeeeseeeeeeeeneeeeeeeeeesaeeeeeeeeeeeaeeeesaeeeeeeeeeees 8 To install EZ Converter FA ccececccsseeeessceeeeseeeeeseeeeeseeeeeneeeeseneneseaeseseeeeeseneseseeneneeees 9 To install ArcSoft MediaConverter 3 for CASIO Projector cccsccesseeeseseeeeseeeees 10 Installing Multi Projection Camera Update Software eesceessseesseereesneeeeeneeeesneees 11 Projecting the Contents of Files on a Memory DEV Ce sssssnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn mnnn 12 Using EZ Converter FA to Convert PowerPoint Files to ECA Or PIG FIGS ouias eoo ee aa aE E TERE AE ERE EE 12 Starting Up and Exiting EZ Converter FA ecccessseeeseeeeeeeeeeeeneeeesaeeeeeeeeesneeeeeneeees 13 Converting a PowerPoint File to an ECA File or PtG File esenee 14 Using ArcSoft MediaConverter 3 for CASIO Projector 0 17 Using Viewer to Project the Contents of a File ona Memory Devio secossa iann pienaari iiaa a
25. conversion is complete You can open the folder where the converted file is stored by clicking Local disk at the bottom of the window If you don t see Local disk at the bottom of the window click o to display it 3 Repeat steps 1 and 2 as many times as necessary to convert all of the movie files you want Selecting and dragging multiple files is also supported in the above operation 4 After you are finished click the button in the upper right corner of the ArcSoft MediaConverter 3 for CASIO Projector window to exit O Note For details about the settings and operations of ArcSoft MediaConverter 3 for CASIO Projector see help To display help click the button in the upper right corner of the ArcSoft MediaConverter 3 for CASIO Projector window On the menu that appears click Help For details about the operation to play back a converted movie file with the projector s Viewer function see Projecting a Movie File page 28 18 Using Viewer to Project the Contents of a File ona Memory Device Use the Data Projector s Viewer application to project the contents of a file on a memory device Viewer starts up automatically whenever you connect a memory device that is supported by the Data Projector into the Data Projector s USB port Connecting a Memory Device to the Data Projector The Data Projector s USB port supports connection of a FAT FAT32 format memory device supported by the US
26. ctor s plug and play setting Plug and play is enabled under the Data Projector s initial default settings For more details about the plug and play setting see Setup Menu Contents in the User s Guide If you connect a USB device to the Data Projector s USB port while it is turned on it will perform one of the following operations depending on its current plug and play setting When plug and play is enabled When this type of device is connected The Data Projector does this automatically USB memory device or USB card reader Starts up Viewer page 19 and projects the Viewer screen with memory card loaded YC 400 YC 430 Document Camera Starts up the YC Camera application page 40 when the Document Camera is turned on and projects the YC Camera application screen When plug and play is disabled In this case the image that is currently being projected does not change However Viewer or the YC Camera Application will start up in the background depending upon the type of USB device that is connected to the Data Projector The following USB expansion function software is included on the CD ROM that comes with the projector Software Name Description EZ Converter FA Software for converting a PowerPoint file to an ECA file or PtG file that can be played back on the projector ArcSoft MediaConverter 3 for CASIO Projector Software for converting movie files Multi Projection Camera Update Software
27. cumstances For example on rare occasions there may be a special need to encourage the widest possible use of a certain library so that it becomes a de facto standard To achieve this non free programs must be allowed to use the library A more frequent case is that a free library does the same job as widely used non free libraries In this case there is little to gain by limiting the free library to free software only so we use the Lesser General Public License In other cases permission to use a particular library in non free programs enables a greater number of people to use a large body of free software For example permission to use the GNU C Library in non free programs enables many more people to use the whole GNU operating system as well as its variant the GNU Linux operating system Although the Lesser General Public License is Less protective of the users freedom it does ensure that the user of a program that is linked with the Library has the freedom and the wherewithal to run that program using a modified version of the Library The precise terms and conditions for copying distribution and modification follow Pay close attention to the difference between a work based on the library and a work that uses the library The former contains code derived from the library whereas the latter must be combined with the library in order to run 60 TERMS AND CONDITIONS FOR COPYING DISTRIBUTION AND MODIFICATION 0
28. d library of the fact that part of it is a work based on the Library and explaining where to find the accompanying uncombined form of the same work 8 You may not copy modify sublicense link with or distribute the Library except as expressly provided under this License Any attempt otherwise to copy modify sublicense link with or distribute the Library is void and will automatically terminate your rights under this License However parties who have received copies or rights from you under this License will not have their licenses terminated so long as such parties remain in full compliance 9 You are not required to accept this License since you have not signed it However nothing else grants you permission to modify or distribute the Library or its derivative works These actions are prohibited by law if you do not accept this License Therefore by modifying or distributing the Library or any work based on the Library you indicate your acceptance of this License to do so and all its terms and conditions for copying distributing or modifying the Library or works based on it 10 Each time you redistribute the Library or any work based on the Library the recipient automatically receives a license from the original licensor to copy distribute link with or modify the Library subject to these terms and conditions You may not impose any further restrictions on the recipients exercise of the rights granted herein You are not res
29. de to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange or c Accompany it with the information you received as to the offer to distribute corresponding source code This alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable form with such an offer in accord with Subsection b above The source code for a work means the preferred form of the work for making modifications to it For an executable work complete source code means all the source code for all modules it contains plus any associated interface definition files plus the scripts used to control compilation and installation of the executable However as a special exception the source code distributed need not include anything that is normally distributed in either source or binary form with the major components compiler kernel and so on of the operating system on which the executable runs unless that component itself accompanies the executable If distribution of executable or object code is made by offering access to copy from a designated place then offering equivalent access to copy the source code from the same place counts as distribution of the source code even though third parties are not compelled to copy the source along with the object code You may not copy modify sublicense or distribute the Program except as expressly provided u
30. dium customarily used for software interchange If distribution of object code is made by offering access to copy from a designated place then offering equivalent access to copy the source code from the same place satisfies the requirement to distribute the source code even though third parties are not compelled to copy the source along with the object code A program that contains no derivative of any portion of the Library but is designed to work with the Library by being compiled or linked with it is called a work that uses the Library Such a work in isolation is not a derivative work of the Library and therefore falls outside the scope of this License 62 However linking a work that uses the Library with the Library creates an executable that is a derivative of the Library because it contains portions of the Library rather than a work that uses the library The executable is therefore covered by this License Section 6 states terms for distribution of such executables When a work that uses the Library uses material from a header file that is part of the Library the object code for the work may be a derivative work of the Library even though the source code is not Whether this is true is especially significant if the work can be linked without the Library or if the work is itself a library The threshold for this to be true is not precisely defined by law If such an object file uses only numerical pa
31. e monitor image Off Does not display the monitor image Initialize YC Camera Setup Returns all YC Camera application setup menu items to their initial default settings For details see To restore all settings on the YC Camera application setup menu to their initial factory defaults on page 48 50 You can connect a CASIO graphing calculator to the Data Projector using a USB cable and project the calculator s screen image with the Data Projector USB connection of the following CASIO graphing calculators is supported fx 9860G Series To project the screen image of a graphing calculator 1 Setthe graphing calculator up for data communication Enter the LINK Mode and configure the Wakeup and Capture settings as shown below Communication Cable Tyre USE Wakeur 0n Capture DHF GEG REU EEF Me F Be sure to configure these communication settings before you connect the calculator to the Data Projector See the user documentation that comes with your calculator for details about configuring these settings 2 Turn on the Data Projector 3 Use the USB cable that came with the graphing calculator to connect it to the Data Projector as illustrated below This will project an image of the graphing calculator from the Data Projector USB Cable The illustration shows the fx 9860G as an example Ss Important f an hourglass figure appears in the image
32. ect the selected image file 4 Perform the operations described below as required To do this Press this key Scroll back to the previous image Scroll forward to the next image Rotate the image right 90 degrees Rotate the image left 90 degrees Start a slideshow from the image file 5 To stop image projection and return to the file menu press the ESC key 26 Projecting a Slideshow The Data Projector s Slide Mode lets you group multiple image files and project them in sequence as a slideshow You can select either manual playback or auto playback for slideshow image display The initial default setting is manual playback To prepare image files for slideshow play Note the following points when preparing your slideshow on your computer All of the image files in the slideshow must be in the same folder Images will appear during a slideshow in the file name sequence the image files are arranged in the folder To display images in a specific sequence adjust their file names so they are listed in the folder in the sequence you want Copy the folder with the slideshow images to a memory device To project image files as a slideshow 1 Connect the memory device where the image files of the slideshow are stored to the Data Projector This will project the main Viewer window If the main Viewer window does not appear press the INPUT key and select USB as the input source
33. en resolution of the ECA file or PtG file page 16 To convert a PowerPoint file to an ECA file or PtG file 1 Turnon your computer and start up Windows 2 Connect the USB memory or memory card where you want to store the converted ECA file or PtG file to your computer You can skip this step if you want to save the ECA file or PtG file to your computer s local hard disk 3 On your computer start up EZ Converter FA If your computer is running Windows Vista or Windows 7 starting up EZ Converter FA will cause the User Account Control message to appear When it does click Allow This will display the EZ Converter FA window MEB 4 Configure the following settings as required Specify the ECA file or PtG file screen display resolution See To specify the screen resolution of the ECA file or PtG file page 16 If the original file contains an animation specify the maximum animation display time See To specify the maximum animation display time page 16 5 Click the button at the top of the EZ Converter FA window This displays a dialog box for opening files 14 6 Select the PowerPoint file you want to convert from and then click the Open button This will display a dialog box like the one shown below for specifying the file settings EZ Converter FA Select Files Input File C Documents and Settings CASIO My Documents Meeting 001 p Output Drive Removable Di
34. ewer window To return Viewer settings to their initial defaults 1 2 Display the Viewer setup menu Use the V key to move the highlighting to Initialize Viewer Setup and then press the ENTER key This will cause a Do you want to restore defaults for the Viewer setup confirmation dialog box to appear Use the A key to move the highlighting to Yes and then press the ENTER key This will return Viewer settings to their initial factory defaults For information about the Viewer initial factory default settings see Configuring Viewer Settings page 34 36 Viewer Troubleshooting Refer to the following whenever Viewer operations are not what you expect Memory Devices Problem Cause and Required Action Viewer does not appear when connect USB memory to the Data Projector s USB port The USB memory you are connecting may have a format that cannot be recognized by the Data Projector Connect the USB memory to your computer to check if its file system is FAT or FAT32 If it isn t reformat the USB memory to FAT or FAT32 Note that doing so will delete all of the data currently in USB memory If the Data Projector cannot recognize the USB memory even though its file system is FAT or FAT32 the USB memory itself may be incompatible Try using different USB memory Off may be selected for the Data Projector s Plug and Play setting Use the procedure in the Co
35. f software distributed through that system in reliance on consistent application of that system it is up to the author donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License 12 If the distribution and or use of the Library is restricted in certain countries either by patents or by copyrighted interfaces the original copyright holder who places the Library under this License may add an explicit geographical distribution limitation excluding those countries so that distribution is permitted only in or among countries not thus excluded In such case this License incorporates the limitation as if written in the body of this License 13 The Free Software Foundation may publish revised and or new versions of the Lesser General Public License from time to time Such new versions will be similar in spirit to the present version but may differ in detail to address new problems or concerns Each version is given a distinguishing version number If the Library specifies a version number of this License which applies to it and any later version you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation If the Library does not specify a license version number you may choose an
36. ge produced the next time you release the shutter will be projected in accordance with the settings on the YC Camera Application Setup Menu page 47 Ss Important You can perform white enhancement only on a projected image that has been skew corrected For more information see the note under To perform manual skew correction on the currently projected image page 46 1 Press the FUNC key to display the YC Camera application function menu 2 Use the V key to move the highlighting to Enhance White and then press the ENTER key This will enhance the white of the projected image Instead of steps 1 and 2 above you can also white enhance the projected image by pressing the A key To perform manual skew correction on the currently projected image O Note Skew correction automatically straightens the image of a document that is misaligned on the document stage of the document camera Under its initial defaults the YC Camera application is configured to perform skew correction automatically You can also turn off auto skew correction If you do you can use the following procedure to adjust image alignment manually This operation will affect only the image that is currently being projected The projection image produced the next time you release the shutter will be projected in accordance with the settings on the YC Camera Application Setup Menu page 47 1 Press the FUNC key to display the YC Camera appl
37. gs Ss Important The procedures in this section assume that you have already connected the Document Camera to the Data Projector as explained under Connecting the Document Camera to the Data Projector page 40 and that the Data Projector s YC Camera application is running YC Camera Application Projection Operations The operations in this section are performed using the YC Camera function menu which appears when you press the FUNC key while the YC Camera application is running YC Camera Functions Camera Zoom Focus Adjust Document Camera Rotate Right Enhance White O Skew Correction a Select ENTER 0K ESC Quit Some operations can be performed using the remote controller s O AA and O keys To release the document camera shutter manually 1 Press the FUNC key to display the YC Camera application function menu The Camera Shutter item should be highlighted by default 2 Press the ENTER key to release the document camera shutter This will cause the image recorded with the document camera to be projected O Note While a rough monitor image or recorded image is projected you can release the shutter manually by pressing the ENTER key without pressing the FUNC key 43 To adjust the document camera s zoom setting 1 2 3 4 Press the FUNC key to display the YC Camera application function menu Use the V key to move the highl
38. he English folder inside the User s Guide folder on the CD ROM that comes with the projector To install Multi Projection Camera Update Software 1 Place the CD ROM that comes with the projector into your computer s CD ROM drive This will automatically display the CD ROM menu screen 2 On the menu screen click the Open Folder button to the right of Multi Projection Camera Update Software This will open the folder on the CD ROM that contains the file named YC 400 exe 3 Double click YC 400 exe Follow the instructions that appear on your computer screen O Note Completing the above steps will create a file named YC 400 bin in the folder you specify For information about how to use the file to update the firmware version of a camera see the file named YC Update_Guide_English pdf in the English folder inside the User s Guide folder on the CD ROM that comes with the projector 11 Memory Device This section explains how to perform the following operations How to use EZ Converter FA computer software to convert PowerPoint files to files that can be played back with the Data Projector s Viewer function How to use ArcSoft MediaConverter 3 for CASIO Projector computer software to convert movie files to files that can be played back with the Data Projector s Viewer function How to project the contents of files stored on a memory device with the Da
39. he CD ROM that comes with the projector into your computer s CD ROM drive This will automatically display the CD ROM menu screen 2 On the menu screen click the Install button to the right of ArcSoft MediaConverter 3 for CASIO Projector Follow the instructions on the dialog boxes that appear on the screen If you are running Windows 7 and the User Account Control message appears while installing click Yes If you are running Windows Vista and the User Account Control message appears while installing click Continue f you are running Windows XP and the message shown below appears while installing click Continue Anyway Software Installation The software you are installing has not passed Windows Logo testing to verity ts compatibaity wath Windows XP Tell me wtw this testing is important Continuing your installation of this software may impair or destabilize the correct operation of your system either immediately or in the future Microsoft strongly recommends that you stop this installation now and contact the software vendor for software that has passed Windows Logo testing 10 Installing Multi Projection Camera Update Software A YC 400 Multi Projection Camera can be connected to the Data Projector only if it is running firmware version 1 1 or higher For information about how to check the firmware version of a camera see the file named YC Update_Guide_English pdf in t
40. he one shown below to appear on the projection screen When this happens use the cursor keys to move the highlighting to the drive you want to use and then press the ENTER key This will display a menu of files for the mode you are entering O Note The Data Projector can recognize up to four drives 22 Projecting an ECA File or PtG File Use the Viewer Presentation Mode to project ECA or PtG files To project an ECA file or PtG file 1 Connect the memory device where the ECA file or PtG file you want to project is stored to the Data Projector This will project the main Viewer window If the main Viewer window does not appear press the INPUT key and select USB as the input source Use the cursor keys to move the highlighting to Presentation and then press the ENTER key This will project a file menu like the one shown below Presentation 1967 2042 1988 2076 f the ECA file or PtG file you want to play back is located in a particular folder use the cursor keys to move the highlighting to that folder and then press the ENTER key Use the cursor keys to move the highlighting to the ECA file or PtG file you want to play back and then press the ENTER key or the O key This will start playback of the selected ECA file or PtG file Perform page change and other operations as required For details about operations you can perform during projection of an ECA file or PtG f
41. ication function menu 2 Use the V key to move the highlighting to Skew Correction and then press the ENTER key This will straighten the projected image Instead of steps 1 and 2 above you can also perform skew correction of the projected image by pressing the L key 46 Configuring YC Camera Application Setup Menu Settings You can use the YC Camera setup menu to configure various YC Camera application operation settings YC Camera Setup Op on Mode ui e Manual Ca Monitor Screen Orientation Horizontal OVertical White Enhancement On off Oduto Skew Correction 0n Ooff Project Document Monitor Image 0n ooff Initialize YC Camera Setup OK ENTER a Select P Modify ESC Quit To configure YC Camera application setup menu settings 1 Press the MENU key to display the setup menu 2 Press the V key to move the highlighting to USB and then press the ENTER key 3 Press the V key once to move the highlighting to Setup and then press the ENTER key This will display the YC Camera application setup menu 4 Use the V and A keys to select the menu item whose setting you want to change 5 Press the lt or P key to select the setting you want so its button is 6 Repeat steps 4 and 5 to configure other settings if you want 7 After you are finished press the ESC key to exit the setup menu O Note Anytime you change the Whi
42. ication named YC Camera is used to project document images Ss Important A YC 400 document camera can be connected to the Data Projector only if it is running firmware version 1 1 or higher Firmware updating software is included on the CD ROM that comes with the projector For more information see Installing the Software page 8 YC Camera Application Function and Operation Overview YC Camera is an application built into the Data Projector that makes it possible to control the YC 400 YC 430 document camera from the Data Projector With the YC Camera application you can project the image of documents placed on the document stage of the document camera Connecting the document camera to the Data Projector s USB port and turning on the document camera will cause the YC Camera application to start up automatically Connecting the Document Camera to the Data Projector This section provides the basic steps you need to perform in order to connect the document camera to the Data Projector and project the image of documents placed onto the document camera s document stage D Important The procedure below assumes that the Data Projector s plug and play feature is turned on which is the initial default setting If you have turned off plug and play turn it back on before performing the procedure below For more details about the plug and play setting see Setup Menu Contents in the User s Guide The resolution of rec
43. ick Help on the menu that appears Exit file playback Click the m button or click the E button and then click Exit on the menu that appears You could also press the ESC button on your computer keyboard to stop playback Using ArcSoft MediaConverter 3 for CASIO Projector ArcSoft MediaConverter 3 for CASIO Projector is computer software that converts an MP4 MOV AVI or WMV format file to a Motion JPEG format AVI file that can be played by the projector s Viewer function For details about file formats see page 5 QuickTime Player 7 or greater is required to convert from a MOV file Ss Important In order to perform the procedures in this section you will first need to install ArcSoft MediaConverter 3 for CASIO Projector from the CD ROM that comes with the Data Projector onto your computer For more information see Installing the Software page 8 17 To convert a movie file to a format that can be played by Viewer 1 Double click the lt icon on your computer desktop This starts up ArcSoft MediaConverter 3 for CASIO Projector and displays a window like the one shown below CASIO Projector device icon 2 Drop the original movie file into the ArcSoft MediaConverter 3 for CASIO Projector window or onto the CASIO Projector device icon This will start the conversion and display a progress bar like the one shown below in the window The progress bar will disappear automatically after
44. ied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE See the GNU Lesser General Public License for more details You should have received a copy of the GNU Lesser General Public License along with this library if not write to the Free Software Foundation Inc 51 Franklin Street Fifth Floor Boston MA 02110 1301 USA Also add information on how to contact you by electronic and paper mail You should also get your employer if you work as a programmer or your school if any to sign a copyright disclaimer for the library if necessary Here is a sample alter the names Yoyodyne Inc hereby disclaims all copyright interest in the library Frob a library for tweaking knobs written by James Random Hacker signature of Ty Coon 1 April 1990 Ty Coon President of Vice That s all there is to it 66 CASIO CASIO COMPUTER CO LTD 6 2 Hon machi 1 chome Shibuya ku Tokyo 151 8543 Japan MA1106 B
45. ighting to Camera Zoom Focus and then press the ENTER key This causes the YC Camera Zoom Focus dialog box to appear in the projection area The Optical Zoom item should be highlighted by default YC Camera Zoom Focus pti M E Focus E Refocus OK ENTER a L Select lt Modify ESC Quit Use the gt and 4 keys to adjust the document camera s zoom setting After the zoom setting is the way you want press the ESC key This will close the YC Camera Zoom Focus dialog box To adjust document focus manually a 2 Press the FUNC key to display the YC Camera application function menu Use the V key to move the highlighting to Camera Zoom Focus and then press the ENTER key This causes the YC Camera Zoom Focus dialog box to appear in the projection area YC Camera Zoom Focus l M Booo Focus Refocus OK ENTER a L iSelect lt 4 m Modify ESC Quit Press the V key to move the highlighting to Focus Use the gt and 4 keys to adjust the document camera s focus After the focus is the way you want press the ESC key This will close the YC Camera Zoom Focus dialog box 44 To adjust the camera position 1 2 3 4 Remove all documents and objects from the document stage Press the FUNC key to display the YC Camera application function menu Use the V key to move the highlighting to Ad
46. ile see Operations during ECA File or PtG File Projection page 24 To stop ECA file or PtG file playback and return to the file menu press the ESC key 23 Operations during ECA File or PtG File Projection The operations described below can be performed while an ECA file or PtG file is playing To do this Perform this operation Go to the previous page Press the lt key Go to the next page Press the gt key Pause ECA file or PtG file playback 1 Press the FUNC key 2 On the function menu that appears use the cursor keys to move the highlighting to Pause and then press the ENTER key Jump to a specific page 1 Press the O key to display a page menu 2 Use the cursor keys to move the highlighting to the thumbnail of the page where you want to start playback of the presentation and then press the ENTER key For information about the other operations you can perform while the page menu is displayed see Page Menu Operations page 25 Stop playback and return to the file Press the ESC key menu The operations described below can be performed while ECA file or PtG file playback is paused To do this Perform this operation Resume ECA file or PtG file Press the ENTER key playback from where it was paused 24 Page Menu Operations Pressing the O key while an ECA file or PtG file is being played will project a page menu like the one shown below D
47. is playback say between Points A and B for example the effect at Point B in the original file is ignored and not converted When Point B is reached during playback of the converted file playback will pause and you will have to press the ENTER key to advance to the next step Ss Important In order to perform the procedures in this section you will first need to install the EZ Converter FA software from the CD ROM that comes with the Data Projector onto your computer For more information see Installing the Software page 8 12 Starting Up and Exiting EZ Converter FA To start up EZ Converter FA Perform either of the following operations to start up EZ Converter FA on the computer Double click the KJ icon on your Windows desktop On your computer s Windows Start menu select All Programs CASIO EZ Converter FA 9 Important If your computer is running Windows Vista or Windows 7 starting up EZ Converter FA may cause the User Account Control message to appear If it does click Allow EZ Converter FA Window The following shows the window that appears while EZ Converter FA is running Player button Convert button Close button Minimize button To display EZ Converter FA help Right click the left side of the window and then select Help on the menu that appears To display EZ Converter FA version information Right click the left side of the window and then select Ab
48. itial default setting for each item is indicated by an asterisk Setting Name Description Image Zoom Zoom Causes images to be projected in the Data Projector s maximum possible size while maintaining the aspect ratio of the image file No Zoom Causes images to be projected in the actual size Display Sequence Specifies the sequence of images in the file menu Setup File Names Ascending Displays files in file name ascending order File Names Descending Displays files in file name descending order Time New to Old Displays files by the time they were last modified from the newest to the oldest Time Old to New Displays files by the time they were last modified from the oldest to the newest Startup Mode Specifies whether the default view when a mode is entered from the main Viewer window is the list view or icon view List View Specifies list view as the default view Icon View Specifies icon view as the default view Image Switching Manual Specifies manual image scrolling Auto Specifies auto image scrolling Slideshow Display Specifies how long each image will remain displayed during a slideshow Interval 5 seconds 10 seconds 30 seconds 1 minute 5 minutes Slideshow Repeat Repeat Loops playback of a slideshow or movie No Repeat Automatically stop playback when the end of a slideshow or movie is reached Movie Display Zoom Causes movies to be played back at the Data Pro
49. jector s maximum possible size while maintaining the aspect ratio of the movie file No Zoom Causes movie files to be played back at their original sizes Initialize Viewer Setup Returns all Viewer settings to their initial factory defaults B 34 To display the Viewer setup menu gee Viewer Setup Perform either of the following operations Operation 1 1 Project the main Viewer window If you are playing a file in the Presentation Slide or Movie Mode pause playback and return to the file menu Next press FUNC then V then ENTER 2 Use the cursor keys to move the highlighting to Viewer Setup and then press the ENTER key Operation 2 1 While the Viewer is being projected press the MENU key If you are playing a file in the Presentation Slide or Movie Mode pause playback before pressing the MENU key 2 Use the V key to move the highlighting to USB and then press the ENTER key 3 Use the V key to move the highlighting to Setup and then press the ENTER key 35 To configure Viewer settings 1 2 Display the Viewer setup menu Use the V and A keys to move the highlighting to the item whose setting you want to change Use the lt q and gt keys to display the available settings After configuring all the settings you want press the ESC key or press the FUNC key and then the ENTER key This will return to the main Vi
50. just Camera Position and then press the ENTER key This displays the camera position adjustment dialog box Point the document camera downwards so the lens is pointed towards the document stage Aim the camera as instructed by the text that appears in the projection area When the document camera is positioned correctly position adjustment will end and the dialog box will close At this time the monitor screen the image being picked up by the document camera will be projected To rotate the currently projected image 1 2 Press the FUNC key to display the YC Camera application function menu Use the V key to move the highlighting to Rotate Right and then press the ENTER key This will rotate the projected image 90 degrees to the right Instead of steps 1 and 2 above you can also rotate the projected image by pressing the O key O Note This operation will affect only the image that is currently being projected The projection image produced the next time you release the shutter will be projected in accordance with the settings on the YC Camera Application Setup Menu page 47 45 To perform white enhancement on the currently projected image O Note White enhancement causes the background of the projected image to be white enhanced which helps to make the text on a document easier to read This operation will affect only the image that is currently being projected The projection ima
51. nder this License Any attempt otherwise to copy modify sublicense or distribute the Program is void and will automatically terminate your rights under this License However parties who have received copies or rights from you under this License will not have their licenses terminated so long as such parties remain in full compliance 55 5 You are not required to accept this License since you have not signed it However nothing else grants you permission to modify or distribute the Program or its derivative works These actions are prohibited by law if you do not accept this License Therefore by modifying or distributing the Program or any work based on the Program you indicate your acceptance of this License to do so and all its terms and conditions for copying distributing or modifying the Program or works based on it 6 Each time you redistribute the Program or any work based on the Program the recipient automatically receives a license from the original licensor to copy distribute or modify the Program subject to these terms and conditions You may not impose any further restrictions on the recipients exercise of the rights granted herein You are not responsible for enforcing compliance by third parties to this License 7 lf as a consequence of a court judgment or allegation of patent infringement or for any other reason not limited to patent issues conditions are imposed on you whether by court order agreement or o
52. nfiguring Advanced Projector Settings section of the User s Guide on the CD ROM to change the Plug and Play setting to On Some folders and or files are not displayed in the file menu All the folders and or files contained in a folder will not be displayed if there are more than 999 folder and or files inside the folder If this happens reduce the number of folders and or files in the folder There are multiple devices connected to the Data Projector via a USB hub or USB card reader but some of the devices are not recognized The Data Projector can recognize up to four drives If the number of connected drives is greater than four the Data Projector will not recognize the fifth and subsequent drives Connect memory devices while ensuring that no more than four drives are connected When I connect my digital camera to the Data Projector via USB digital camera memory contents do not appear The digital camera s USB mass storage class setting may not be configured correctly or you may need to perform some operation on the camera Consult the user documentation for your digital camera for information about the required settings and operations The digital camera may not support USB mass storage class If it does not you will not be able to use Viewer to view digital camera memory contents 37 File Display and Playback ECA or PtG files converted from PowerPoint files using EZ Converter FA
53. nformed that you can do these things To protect your rights we need to make restrictions that forbid distributors to deny you these rights or to ask you to surrender these rights These restrictions translate to certain responsibilities for you if you distribute copies of the library or if you modify it For example if you distribute copies of the library whether gratis or for a fee you must give the recipients all the rights that we gave you You must make sure that they too receive or can get the source code If you link other code with the library you must provide complete object files to the recipients so that they can relink them with the library after making changes to the library and recompiling it And you must show them these terms so they know their rights We protect your rights with a two step method 1 we copyright the library and 2 we offer you this license which gives you legal permission to copy distribute and or modify the library To protect each distributor we want to make it very clear that there is no warranty for the free library Also if the library is modified by someone else and passed on the recipients should know that what they have is not the original version so that the original author s reputation will not be affected by problems that might be introduced by others Finally software patents pose a constant threat to the existence of any free program We wish to make sure that a company cannot effec
54. nii paia 19 Connecting a Memory Device to the Data Projector ssseseeesrrisrrreerrrerrresrrrsrrreses 19 Starting Projection with VieWer eeseeeeseeeeeseeeeeneeeeeeeeeeeeeeeeeneeeesaeeeesaeeeesneeeesaeeess 21 Projecting an ECA File or PtG File 00 0 eeeeeeeeneeeeseeeeeeeeeeeneeeesaeeeseneeeeaeeeseneeeenneees 23 Projecting an Image File cceeeeeceseseeeeeeeeseeeeeseeeeeseeeensaeeeseseeeeeseneneseeeessenenseseeens 26 Projecting a Slid SHOW cesesecesseeeeseeeeeeeeeeeseneeeseeeeeeseeeessaneneseeeeseeeeeeseneneseeensneneness 27 Projecting a Movie File cccccceseeesseeeeeseeeeseeeeseseeneseeeeeseeeeseseeeeessceeeseesessenenessenees 28 File Menu Operations inciniciia wtneiinnchnteiis ena endinin advair nites 31 Configuring Viewer Settings cc cceseseseceeesseneseceeesesceesesseseeseeeeseeeeenesesenesenensennenss 34 Viewer TroubleShooting cccceceseeeeeeeeeeeeeeeeeeseeseeeeeeeeneeseeeeeeeeeenees 37 Memory DeVICES wiiias cite anrea ined Alinta EN 37 File Display and Playback 0 eeceeseeeeseseeeeeneeeeeaeeeeeneeeeeaeeeeeaeeeesaneeseaeeeeesaeeeeeaeeeeeaeeees 38 Viewer Error IWGSSAG CS aii sacs ctcctiecanuss dace sacdusinmsuueusiaimuuanerasouiehdemesuanas 39 Performing a Presentation Using the YC 400 YC 430 Document Camera ccccccssseeseeeeees 40 YC Camera Application Function and Operation Overview 40 Connecting the Document Camera to the Data Projector 40 YC C
55. ns when you distribute them as separate works But when you distribute the same sections as part of a whole which is a work based on the Program the distribution of the whole must be on the terms of this License whose permissions for other licensees extend to the entire whole and thus to each and every part regardless of who wrote it Thus it is not the intent of this section to claim rights or contest your rights to work written entirely by you rather the intent is to exercise the right to control the distribution of derivative or collective works based on the Program In addition mere aggregation of another work not based on the Program with the Program or with a work based on the Program on a volume of a storage or distribution medium does not bring the other work under the scope of this License You may copy and distribute the Program or a work based on it under Section 2 in object code or executable form under the terms of Sections 1 and 2 above provided that you also do one of the following a Accompany it with the complete corresponding machine readable source code which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange or b Accompany it with a written offer valid for at least three years to give any third party for a charge no more than your cost of physically performing source distribution a complete machine readable copy of the corresponding source co
56. of the EZ Converter FA window On the menu that appears click Max Animation Display Time On the sub menu that appears select a maximum animation display time value in seconds Available sub menu options are 10 seconds 20 seconds 30 seconds and 60 seconds The option you select remains in effect until you change it To play back an ECA file or PtG file on your computer 1 On your computer start up EZ Converter FA This will display the EZ Converter FA window Click the gt button at the top of the EZ Converter FA window This will display two more buttons as shown below RECE Click the button This displays a dialog box for opening files Select the ECA file or PtG file you want to play back and then click the Open button 16 5 Click the J button to start playback This will display a control panel at the top of the screen Control panel 1967 2042 we 1988 2076 During file playback you can use the control panel buttons to perform the operations described below To do this Perform this operation Go to the previous page Click the button Go to the next page Click the button Jump to a specific page 1 Click the E button and then click Slide Viewer on the menu that appears 2 On the page menu that appears click the thumbnail of the destination page and then click OK Display help Click the B button and then cl
57. oftware Foundation Inc 51 Franklin Street Fifth Floor Boston MA 02110 1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document but changing it is not allowed Preamble The licenses for most software are designed to take away your freedom to share and change it By contrast the GNU General Public License is intended to guarantee your freedom to share and change free software to make sure the software is free for all its users This General Public License applies to most of the Free Software Foundation s software and to any other program whose authors commit to using it Some other Free Software Foundation software is covered by the GNU Lesser General Public License instead You can apply it to your programs too When we speak of free software we are referring to freedom not price Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software and charge for this service if you wish that you receive source code or can get it if you want it that you can change the software or use pieces of it in new free programs and that you know you can do these things To protect your rights we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights These restrictions translate to certain responsibilities for you if you distribute copies of the software or if you modify it For example if you di
58. on write to the Free Software Foundation we sometimes make exceptions for this Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally NO WARRANTY 11 BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE THERE IS NO WARRANTY FOR THE PROGRAM TO THE EXTENT PERMITTED BY APPLICABLE LAW EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND OR OTHER PARTIES PROVIDE THE PROGRAM AS IS WITHOUT WARRANTY OF ANY KIND EITHER EXPRESSED OR IMPLIED INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU SHOULD THE PROGRAM PROVE DEFECTIVE YOU ASSUME THE COST OF ALL NECESSARY SERVICING REPAIR OR CORRECTION 12 IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER OR ANY OTHER PARTY WHO MAY MODIFY AND OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE BE LIABLE TO YOU FOR DAMAGES INCLUDING ANY GENERAL SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUC
59. opy of these materials or that you have already sent this user a copy 2 63 For an executable the required form of the work that uses the Library must include any data and utility programs needed for reproducing the executable from it However as a special exception the materials to be distributed need not include anything that is normally distributed in either source or binary form with the major components compiler kernel and so on of the operating system on which the executable runs unless that component itself accompanies the executable It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not normally accompany the operating system Such a contradiction means you cannot use both them and the Library together in an executable that you distribute 7 You may place library facilities that are a work based on the Library side by side in a single library together with other library facilities not covered by this License and distribute such a combined library provided that the separate distribution of the work based on the Library and of the other library facilities is otherwise permitted and provided that you do these two things a Accompany the combined library with a copy of the same work based on the Library uncombined with any other library facilities This must be distributed under the terms of the Sections above b Give prominent notice with the combine
60. orded images is fixed at 4 megapixels when a YC 400 YC 430 Document Camera is connected to the Data Projector The resolution setting cannot be changed in this case 40 To connect the document camera to the Data Projector and project the image of a document 1 Turn on the Data Projector Wait until the Data Projector s POWER STANDBY indicator is lit green 2 Connect the document camera to the Data Projector using the USB cable that comes bundled with the document camera YC 400 YC 430 Soc f oe Document stage 3 With nothing on the document stage press the power button on the camera stand This will turn on the document camera which will cause its lens to extend The Data Projector will recognize the document camera and start up the YC Camera application automatically When the YC Camera application starts up the Data Projector will project an image of the document stage along with a dialog box for adjusting the document camera position f the document camera is positioned correctly position adjustment will end automatically and the dialog box will close At this time the monitor screen the image being picked up by the document camera will be projected f the document camera is not positioned correctly a message prompting you to adjust the document camera position will appear Follow the instructions shown in the message to adjust the document camera position 41 4
61. ot play ECA or PtG files select on the Presentation Mode file menu The file you are trying to play may be corrupted Re convert the PowerPoint files using the procedure under To convert a PowerPoint file to an ECA file or PtG file page 14 cannot play image files select on the Slide Mode file menu The file you are trying to play may be corrupted If you have the original file on your computer check to see if it is normal If it is copy the original file to the memory device and try playing it again f the message Cannot display an image file appears refer to Viewer Error Messages page 39 cannot play movie files select on the Movie Mode file menu The file you are trying to play may be corrupted If you have the original file on your computer check to see if it is normal If it is copy the original file to the memory device and try playing it again f the message This movie file cannot be played back appears refer to Viewer Error Messages page 39 38 Viewer Error Messages Problem Cause and Required Action Folder does not contain any image There is no displayable folder ECA file or PtG file image file or movie file in files the folder you are trying to access with Viewer Use your computer to check the contents of the folder For details about file formats supported for Data Projector playback see About the Data Projector s USB Functions
62. out on the menu that appears To close EZ Converter FA Click the close button in the upper right corner of the EZ Converter FA window 13 Converting a PowerPoint File to an ECA File or PtG File Ss Important Before performing any of the operations here you will need to have a file created using Microsoft Office PowerPoint 2003 2007 or 2010 on hand Conversion of a PowerPoint file to an ECA file or PtG file requires playback of the original file from beginning to end Note that the time required for conversion will roughly correspond to the time required for playback O Note Starting a conversion operation with EZ Converter FA will temporarily change the screen settings of your computer as shown below Screen settings will revert back to what they were after the conversion operation is complete Operating System Changes Windows XP Screen resolution changes to 800 x 600 1024 x 768 1280 x 768 or 1280 x 800 Display card hardware acceleration is disabled Windows Vista or Screen resolution changes to 800 x 600 1024 x 768 1280 x 768 or Windows 7 1280 x 800 Windows changes to the Basic mode Windows Aero disabled The screen resolution of the ECA file or PtG file will be the resolution specified by the EZ Converter FA setting 800 x 600 1024 x 768 1280 x 768 or 1280 x 800 when the file conversion operation starts For information about configuring this setting see To specify the scre
63. page 5 This ECA PtG file cannot be played There may be an error in the ECA file or PtG file itself Play back the ECA file back or PtG file using the EZ Converter FA on your computer and check it Cannot display an image file The image file may be too large to play back Use image files that are no larger than 8MB The image file may be a progressive JPEG file The Data Projector does not support playback of progressive JPEG files Use normal non progressive JPEG format files There may be an error in the image file itself Open the image file on your computer and check it This movie file cannot be played The movie file may be a format that is not supported for Data Projector back playback For details about the movie file format supported for Data Projector playback see About the Data Projector s USB Functions page 5 Some movie file formats can be converted to a format supported for Data Projector playback using software ArcSoft MediaConverter 3 for CASIO Projector included on the CD ROM that comes with the Data Projector There may be an error in the movie file itself Open the movie file on your computer and check it 39 Document Camera This section explains how to connect the CASIO YC 400 YC 430 Multi Projection Camera document camera to the Data Projector in order to project the images of documents placed on the document stage of the document camera The Data Projector s built in appl
64. ponsible for enforcing compliance by third parties with this License 1 _ If as a consequence of a court judgment or allegation of patent infringement or for any other reason not limited to patent issues conditions are imposed on you whether by court order agreement or otherwise that contradict the conditions of this License they do not excuse you from the conditions of this License If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations then as a consequence you may not distribute the Library at all For example if a patent license would not permit royalty free redistribution of the Library by all those who receive copies directly or indirectly through you then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Library If any portion of this section is held invalid or unenforceable under any particular circumstance the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances 64 It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims this section has the sole purpose of protecting the integrity of the free software distribution system which is implemented by public license practices Many people have made generous contributions to the wide range o
65. projected from the Data Projector when you connect the calculator perform some operation on the calculator This should cause the hourglass to disappear and enable normal projection if the calculator does not operate properly after you connect it to the Data Projector try disconnecting the USB cable from the calculator and then reconnecting it If this does not correct the problem disconnect the USB cable from both the Data Projector and the calculator Turn the Data Projector off and then back on again and then re connect the calculator 51 GPL and LGPL 1 This product uses software This Software that comes under the GNU General Public License GPL and GNU Lesser General Public License LGPL In accordance with the GPL and LGPL the source code of This Software is open source code Anyone who wishes to view the open source code can do so by downloading it from the CASIO Projector download site Whenever copying modifying or distributing This Software be sure to do so in accordance with the terms and conditions of the GPL and LGPL 2 This Software is provided as is without expressed or implied warranty of any kind However this disclaimer does not affect the terms and conditions of the warranty of the product itself including malfunctions due to This Software 3 The following are the GPL and LGPL that This Software comes under 52 GNU GENERAL PUBLIC LICENSE Version 2 June 1991 Copyright C 1989 1991 Free S
66. properties you want to view A thumbnail and the properties of the currently highlighted file will appear on the left side of the file menu Thumbnail Properties The following explains the information that appears in file properties Presentation Mode This item Shows this Type ECA File or PtG File Presentation file converted with EZ Converter FA Size File size Date Date and time the file was last modified Pixels Number of pixels in the file Slide Mode This item Shows this Type Image type JPEG Image or BMP Image Size File size Date Date and time the file was last modified Pixels Number of pixels in image data included in the file Rotation This item appears only for image files that include Exif format orientation information Right side Top indicates 90 degree rotation right while Left side Bottom indicates 90 degree rotation left Movie Mode This item Shows this Movie File size Date and time the file was last modified Number of movie pixels in the file 33 To return to the main Viewer window 1 Press the FUNC key 2 On the function menu that appears use the cursor keys to move the highlighting to Back to Viewer Selection and then press the ENTER key Configuring Viewer Settings You can use the Viewer setup menu to configure the Viewer function settings described below The in
67. ram or any portion of it thus forming a work based on the Program and copy and distribute such modifications or work under the terms of Section 1 above provided that you also meet all of these conditions a You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change b You must cause any work that you distribute or publish that in whole or in part contains or is derived from the Program or any part thereof to be licensed as a whole at no charge to all third parties under the terms of this License If the modified program normally reads commands interactively when run you must cause it when started running for such interactive use in the most ordinary way to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty or else saying that you provide a warranty and that users may redistribute the program under these conditions and telling the user how to view a copy of this License Exception if the Program itself is interactive but does not normally print such an announcement your work based on the Program is not required to print an announcement 2 54 These requirements apply to the modified work as a whole If identifiable sections of that work are not derived from the Program and can be reasonably considered independent and separate works in themselves then this License and its terms do not apply to those sectio
68. rameters data structure layouts and accessors and small macros and small inline functions ten lines or less in length then the use of the object file is unrestricted regardless of whether it is legally a derivative work Executables containing this object code plus portions of the Library will still fall under Section 6 Otherwise if the work is a derivative of the Library you may distribute the object code for the work under the terms of Section 6 Any executables containing that work also fall under Section 6 whether or not they are linked directly with the Library itself As an exception to the Sections above you may also combine or link a work that uses the Library with the Library to produce a work containing portions of the Library and distribute that work under terms of your choice provided that the terms permit modification of the work for the customer s own use and reverse engineering for debugging such modifications You must give prominent notice with each copy of the work that the Library is used in it and that the Library and its use are covered by this License You must supply a copy of this License If the work during execution displays copyright notices you must include the copyright notice for the Library among them as well as a reference directing the user to the copy of this License Also you must do one of these things a Accompany the work with the complete corresponding machine readable source code for
69. rd to the next image gt Rotate the image right 90 degrees A Rotate the image left 90 degrees 0 Resume the slideshow O 7 To return to the file menu after the slideshow is complete press the ESC key Projecting a Movie File Use the Viewer Movie Mode to project movie files O Note Viewer supports playback of Motion JPEG format AVI movie files See page 5 for details Playback of other format movie files is not supported The CD ROM that comes with the Data Projector contains software ArcSoft MediaConverter 3 for CASIO Projector for converting some movie file formats to the format supported by the projector For information about installing the software see Installing the Software page 8 For information about movie file formats that can be converted and about the conversion process see Using ArcSoft MediaConverter 3 for CASIO Projector page 17 28 To project a movie file 1 Connect the memory device where the movie file you want to project is stored to the Data Projector This will project the main Viewer window If the main Viewer window does not appear press the INPUT key and select USB as the input source 2 Use the cursor keys to move the highlighting to Movie and then press the ENTER key This will project a file menu like the one shown below 1 Movie Gna IRE f the movie file you want to play back is located in a particular folder use the cursor keys to
70. right to control the distribution of derivative or collective works based on the Library In addition mere aggregation of another work not based on the Library with the Library or with a work based on the Library on a volume of a storage or distribution medium does not bring the other work under the scope of this License You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of the Library To do this you must alter all the notices that refer to this License so that they refer to the ordinary GNU General Public License version 2 instead of to this License If a newer version than version 2 of the ordinary GNU General Public License has appeared then you can specify that version instead if you wish Do not make any other change in these notices Once this change is made in a given copy it is irreversible for that copy so the ordinary GNU General Public License applies to all subsequent copies and derivative works made from that copy This option is useful when you wish to copy part of the code of the Library into a program that is not a library You may copy and distribute the Library or a portion or derivative of it under Section 2 in object code or executable form under the terms of Sections 1 and 2 above provided that you accompany it with the complete corresponding machine readable source code which must be distributed under the terms of Sections 1 and 2 above on a me
71. sk E v 4 135 612 KB Space Free Output File Name E ECA Meeting 001 ECA re Configure the settings as required on the dialog box The following describes the meanings and settings of each of the items that appear on the dialog box Dialog Box Item Input File Description Shows the name of the PowerPoint file selected in step 6 The setting of this item cannot be changed Output Drive Shows the drive name of the removable disk USB memory or memory card connected to the computer in step 2 When you have multiple removable disks connected to your computer you can click the W button and select the name of the drive where you want to save the converted file A converted file is stored in the folder named ECA in the case of an ECA file or PtG in the case of a PtG file on the drive you specify here Under initial default settings if there are no removable disks connected to the computer the resulting file will be saved in the same location drive and folder as the original PowerPoint file Click the Browse button and change the save destination if you want Output File Name Shows the file name of the converted file along with the path from the drive name Except for the extension the file name is the same as the PowerPoint file name The setting of this item cannot be changed Specifies the format of the converted file Default ECA For details about ECA and PtG files see About the
72. stribute copies of such a program whether gratis or for a fee you must give the recipients all the rights that you have You must make sure that they too receive or can get the source code And you must show them these terms so they know their rights We protect your rights with two steps 1 copyright the software and 2 offer you this license which gives you legal permission to copy distribute and or modify the software Also for each author s protection and ours we want to make certain that everyone understands that there is no warranty for this free software If the software is modified by someone else and passed on we want its recipients to know that what they have is not the original so that any problems introduced by others will not reflect on the original authors reputations Finally any free program is threatened constantly by software patents We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses in effect making the program proprietary To prevent this we have made it clear that any patent must be licensed for everyone s free use or not licensed at all The precise terms and conditions for copying distribution and modification follow 53 TERMS AND CONDITIONS FOR COPYING DISTRIBUTION AND MODIFICATION 0 This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this
73. t C 1991 1999 Free Software Foundation Inc 51 Franklin Street Fifth Floor Boston MA 02110 1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document but changing it is not allowed This is the first released version of the Lesser GPL It also counts as the successor of the GNU Library Public License version 2 hence the version number 2 1 Preamble The licenses for most software are designed to take away your freedom to share and change it By contrast the GNU General Public Licenses are intended to guarantee your freedom to share and change free software to make sure the software is free for all its users This license the Lesser General Public License applies to some specially designated software packages typically libraries of the Free Software Foundation and other authors who decide to use it You can use it too but we suggest you first think carefully about whether this license or the ordinary General Public License is the better strategy to use in any particular case based on the explanations below When we speak of free software we are referring to freedom of use not price Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software and charge for this service if you wish that you receive source code or can get it if you want it that you can change the software and use pieces of it in new free programs and that you are i
74. ta Projector s Viewer function Viewer is one of the Data Projector s built in applications It lets you play back and project the contents of files from a memory device connected to the Data Projector Using EZ Converter FA to Convert PowerPoint Files to ECA or PtG Files EZ Converter FA is computer software for converting PowerPoint files to ECA or PtG files that can be played back and projected by the Data Projector EZ Converter FA supports conversion of file created with Microsoft Office PowerPoint 2003 2007 and 2010 Save for certain exceptions described below playback and projection of an ECA file or PtG file normally should be able to reproduce transitions animations and other special effects of the original PowerPoint file Conversion of OLE objects movies audio etc and VBA objects in a PowerPoint file is not supported Conversion of timer and repeat operations in a PowerPoint file animation is not supported An animation in a PowerPoint file is converted up to the time specified by Max Animation Display Time page 16 and everything after that is cut When the point up to which the animation was converted is reached during playback of the converted file playback will pause and you will have to press the ENTER key to advance to the next step The source PowerPoint file plays when you convert a file with EZ Converter FA If there is no change on the screen for about three consecutive seconds during th
75. te Enhancement or Skew Correction setting the new setting goes into effect from the next image you record with the document camera after exiting the setup menu Other settings go into effect as soon as you exit the setup menu 47 To restore all settings on the YC Camera application setup menu to their initial factory defaults 1 Press the MENU key to display the setup menu 2 Press the V key to move the highlighting to USB and then press the ENTER key 3 Press the V key once to move the highlighting to Setup and then press the ENTER key This will display the YC Camera application setup menu 4 Press the V key to move the highlighting to Initialize YC Camera Setup and then press the ENTER key This displays the dialog box shown below Initialize YC Camera Setup Do you want to restore defaults for the YC camera Yes a L Select ENTER ESC Return 5 Use the A key to select Yes 6 To restore all the settings to their initial defaults press the ENTER key To exit the operation without doing anything press the ESC key instead of the ENTER key 7 After you are finished press the ESC key to exit the setup menu 48 YC Camera Application Setup Menu Contents This section provides detailed explanations of all of the items included on the YC Camera application setup menu The initial default setting for each item is indicated by an asterisk
76. the Library including whatever changes were used in the work which must be distributed under Sections 1 and 2 above and if the work is an executable linked with the Library with the complete machine readable work that uses the Library as object code and or source code so that the user can modify the Library and then relink to produce a modified executable containing the modified Library It is understood that the user who changes the contents of definitions files in the Library will not necessarily be able to recompile the application to use the modified definitions b Use a suitable shared library mechanism for linking with the Library A suitable mechanism is one that 1 uses at run time a copy of the library already present on the user s computer system rather than copying library functions into the executable and 2 will operate properly with a modified version of the library if the user installs one as long as the modified version is interface compatible with the version that the work was made with c Accompany the work with a written offer valid for at least three years to give the same user the materials specified in Subsection 6a above for a charge no more than the cost of performing this distribution If distribution of the work is made by offering access to copy from a designated place offer equivalent access to copy the above specified materials from the same place Verify that the user has already received a c
77. therwise that contradict the conditions of this License they do not excuse you from the conditions of this License If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations then as a consequence you may not distribute the Program at all For example if a patent license would not permit royalty free redistribution of the Program by all those who receive copies directly or indirectly through you then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Program If any portion of this section is held invalid or unenforceable under any particular circumstance the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims this section has the sole purpose of protecting the integrity of the free software distribution system which is implemented by public license practices Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system it is up to the author donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice This section is intended to make thoroughl
78. tion area This is the entire rectangular area that is projected by the Data Projector Certain Data Projector operations will cause messages and menus to appear within the projection area Computer screen This is the physical display device of your computer The USB port built into the Data Projector lets you connect an external USB device and use it as an input source for image projection USB Memory Device or Memory Card After you connect a memory device to the Data Projector s USB port you can playback project the following types of files ECA files Special projector presentation files The EZ Converter FA software that comes with the Data Projector can be used to convert PowerPoint files to ECA ECA files for playback Note that unconverted PowerPoint files cannot be played back PtG file MobiShow presentation file PtG is a presentation file format that is compatible with AWIND s MobiShow Your Data Projector supports playback of PtG files only if they have been converted using EZ Converter FA software Image files Playback is supported for JPEG jpg jpeg jpe excluding progressive format format or BMP bmp format image files up to about 8 MB in size Movie files Playback is supported for the following types of movie files up to a maximum file size of approximately 4GB e Motion JPEG format avi e Resolution 1280 x 720 640 x 480 320 x 240 e Maximum Data rate 15 Mbps Maximum frame rate 24 fps for 12
79. tively restrict the users of a free program by obtaining a restrictive license from a patent holder Therefore we insist that any patent license obtained for a version of the library must be consistent with the full freedom of use specified in this license 59 Most GNU software including some libraries is covered by the ordinary GNU General Public License This license the GNU Lesser General Public License applies to certain designated libraries and is quite different from the ordinary General Public License We use this license for certain libraries in order to permit linking those libraries into non free programs When a program is linked with a library whether statically or using a shared library the combination of the two is legally speaking a combined work a derivative of the original library The ordinary General Public License therefore permits such linking only if the entire combination fits its criteria of freedom The Lesser General Public License permits more lax criteria for linking other code with the library We call this license the Lesser General Public License because it does Less to protect the user s freedom than the ordinary General Public License It also provides other free software developers Less of an advantage over competing non free programs These disadvantages are the reason we use the ordinary General Public License for many libraries However the Lesser license provides advantages in certain special cir
80. y clear what is believed to be a consequence of the rest of this License 8 If the distribution and or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries so that distribution is permitted only in or among countries not thus excluded In such case this License incorporates the limitation as if written in the body of this License 9 The Free Software Foundation may publish revised and or new versions of the General Public License from time to time Such new versions will be similar in spirit to the present version but may differ in detail to address new problems or concerns Each version is given a distinguishing version number If the Program specifies a version number of this License which applies to it and any later version you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation If the Program does not specify a version number of this License you may choose any version ever published by the Free Software Foundation 56 10 If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different write to the author to ask for permission For software which is copyrighted by the Free Software Foundati
81. y version ever published by the Free Software Foundation 14 If you wish to incorporate parts of the Library into other free programs whose distribution conditions are incompatible with these write to the author to ask for permission For software which is copyrighted by the Free Software Foundation write to the Free Software Foundation we sometimes make exceptions for this Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally NO WARRANTY 15 BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE THERE IS NO WARRANTY FOR THE LIBRARY TO THE EXTENT PERMITTED BY APPLICABLE LAW EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND OR OTHER PARTIES PROVIDE THE LIBRARY AS IS WITHOUT WARRANTY OF ANY KIND EITHER EXPRESSED OR IMPLIED INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE LIBRARY IS WITH YOU SHOULD THE LIBRARY PROVE DEFECTIVE YOU ASSUME THE COST OF ALL NECESSARY SERVICING REPAIR OR CORRECTION 16 IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER OR ANY OTHER PARTY WHO MAY MODIFY AND OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE BE LIABLE TO YOU FOR DAMAGES INCLUDING ANY GENERAL SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF TH

CASIO DATA PROJECTOR XJ-M245/XJ-M255 UsersGuide

Contents

Download Pdf Manuals

Related Search

Related Contents