Agilent OpenLAB Chromatography Data System (CDS) Workstation Installation guide
Contents
1. 7015 b 2 November 1995 as applicable in any technical data Safety Notices CAUTION A CAUTION notice denotes a hazard It calls attention to an operating procedure practice or the like that if not correctly per formed or adhered to could result in damage to the product or loss of important data Do not proceed beyond a CAUTION notice until the indicated condi tions are fully understood and met A WARNING notice denotes a hazard It calls attention to an operating procedure practice or the like that if not correctly performed or adhered to could result in personal injury or death Do not proceed beyond a WARNING notice until the indi cated conditions are fully under stood and met CDS Workstation Installation Guide Contents Contents 1 Introduction 5 Who Should Read This Guide 6 The Agilent OpenLAB CDS Software 7 Before You Begin 8 2 Install the Software 11 Step 1 Run the Application 12 Step 2 Copy DVDs to a Centralized Folder for Installation Optional 13 Step 3 Run the System Configuration Checker 14 Step 4 Run the OpenLAB CDS Installation Wizard 16 Optional Install Acrobat Reader 22 Optional Install OpenLAB Data Analysis as Add on or Standalone Application 23 What to do Next 25 3 Uninstall the Software 27 About Uninstallation 28 Run the Master Installer 29 Run the OpenLAB CDS Uninstallation Wizard 30 4 Scripted Installation 31 About Scripted Installation 32 Export as2. customers needs from a small standalone analytical lab to a global network with hundreds of locations Using the OpenLAB software instruments from multiple vendors can connect to any size network from individual workstations and workgroups to global enterprises With full instrument control centralized administration and ease of support users can achieve lower operational costs and better instrument use See your Agilent representative to learn how other products in the OpenLAB suite can help you The Agilent OpenLAB CDS software is provided on several edition specific disks Table 1 lists the disks you will receive for your software edition Table 1 OpenLAB CDS Components Disk Name ChemStation Edition EZChrom Edition OpenLAB CDS Shared Services Software X X OpenLAB CDS ChemStation Edition Core X Software OpenLAB CDS ChemStation Edition Drivers X OpenLAB CDS EZChrom Edition Core X Software OpenLAB CDS EZChrom Edition Drivers OpenLAB CDS Support OpenLAB CDS Data Store Software x XxX XxX X OpenLAB Data Analysis CDS Workstation Installation Guide 1 Introduction Before You Begin To simplify installation of the software it is helpful to decide on some configuration options before you begin the actual software installation 1 For installing OpenLAB CDS you need to have administrator privileges for all servers and clients Power user privileges are not sufficient the installation does not start D
3. has finished click Finish to close the uninstallation wizard 30 CDS Workstation Installation Guide CDS Workstation Installation Guide 000 ee 4 Scripted Installation 8 e e i e About Scripted Installation 32 Exportas XML 33 Parameters and Return Codes 34 Installation Upgrade or Repair 37 Uninstallation 38 Logging and Tracing 39 This chapter describes the syntax and parameters for an installation or uninstallation in command line mode ig Agilent Technologies 31 4 Scripted Installation About Scripted Installation 32 The OpenLAB CDS Master Installer supports a command line mode for installation the so called scripted installation This mode supports installation upgrade repair and uninstallation You can execute scripted installations either manually or as part of software management systems such as LANDesk or HP CM With the corresponding parameter q the scripted installation is completely UI less CDS Workstation Installation Guide Scripted Installation 4 Export as XML The Master Installer supports a feature to export the installation parameters into an XML file which you can then use for the scripted installation This feature is also supported for upgrade and repair However for these cases the exported installation XML file is not appropriate For scripted repair and upgrade you must prepare specific XML files using the respective Master Installer wizards 1 Launch
4. system report and continue installation e View the system report and decide to continue installation e View the system report and postpone installation until the problem is fixed To view the system report as PDF file Adobe Reader must be installed Decline to view the system report and postpone Your installation settings determine which disks need to be copied during installation If you are installing directly from the DVDs follow the Insert Disk prompts as they appear If you are installing from a local drive you won t insert disks or browse to disk folders the entire installation will run automatically based on your installation settings If the OpenLAB CDS Installation Wizard cannot locate a necessary file whether on a disk or in a folder a Disk or File not found prompt will appear For disks follow the prompts to Retry using the same disk Insert the correct disk if you made an error and select OK Select Cancel to cancel the installation The system will uninstall any components installed so far If a file in a centralized folder cannot be found you may have to recreate the folder See Step 2 Copy DVDs to a Centralized Folder for Installation Optional on page 13 above If the installation of any vital application or component fails the installation will roll back uninstall If a failed component can be installed at a later time without affecting basic installation e g ECM API
5. Agilent OpenLAB Chromatography Data System CDS Workstation Installation Guide E Agilent Technologies Notices Agilent Technologies Inc 2010 2011 2012 No part of this manual may be reproduced in any form or by any means including elec tronic storage and retrieval or translation into a foreign language without prior agree ment and written consent from Agilent Technologies Inc as governed by United States and international copyright laws Manual Part Number M8301 90004 Edition 10 2012 Printed in Germany Agilent Technologies Hewlett Packard Strasse 8 76337 Waldbronn This product may be used as a com ponent of an in vitro diagnostic sys tem if the system is registered with the appropriate authorities and com plies with the relevant regulations Otherwise it is intended only for gen eral laboratory use Software Revision This guide is valid for revision A 01 04 of Agilent OpenLAB CDS Microsoft and Windows Server are U S registered trademarks of Microsoft Corporation Warranty The material contained in this docu ment is provided as is and is sub ject to being changed without notice in future editions Further to the max imum extent permitted by applicable law Agilent disclaims all warranties either express or implied with regard to this manual and any information contained herein including but not limited to the implied warranties of merchantability and fitness fo
6. Driver the installation will proceed In this case you will be notified of any failure s and that further steps are necessary to fully complete installation CDS Workstation Installation Guide Install the Software 2 4 If an IQ was completed as part of this installation review the Installation Qualification Report If the report indicates failure verify the computer requirements and reinstall the data system Do not use the system until an Installation Qualification Report gives a pass result 5 Click Finish to close the installation wizard CDS Workstation Installation Guide 21 2 Install the Software Optional Install Acrobat Reader In order to view site prep or administrative reports or to use the new Report Viewer feature ChemStation Edition only you need a PDF reader If a PDF reader is not yet installed on your system you can install Adobe Reader version 10 1 0 from the OpenLAB CDS installation DVDs It is available on disk6 Adobe Reader in 4 language versions English Japanese Chinese and Portuguese Run the self extracting exe file of your choice and follow the instructions of the Adobe Reader X Setup wizard 22 CDS Workstation Installation Guide Install the Software 2 Optional Install OpenLAB Data Analysis as Add on or Standalone Application If you have not installed OpenLAB Data Analysis together with OpenLAB CDS installation you can install OpenLAB Data Analysis as an add on to OpenLAB CDS or as
7. XML 33 Parameters and Return Codes 34 Installation Upgrade or Repair 37 Uninstallation 38 Logging and Tracing 39 5 Optional Procedures 41 Run the IQ After Software Installation 42 Upgrade OpenLAB CDS Workstation to Latest Version 43 CDS Workstation Installation Guide 3 Contents 4 CDS Workstation Installation Guide CDS Workstation Installation Guide c00 ee 1 T hd Introduction e i e Who Should Read This Guide 6 The Agilent OpenLAB CDS Software 7 Before You Begin 8 This chapter gives you an overview of the OpenLAB software It also includes certain requirements before starting the installation ig Agilent Technologies 1 Introduction Who Should Read This Guide This installation guide is designed to help system administrators and other users install the Agilent OpenLAB Chromatography Data System CDS to individual workstations quickly and correctly Intranet Internet optional WorkStation Figure 1 Sample workstation hardware configuration See your Agilent representative for other system configuration installation guides 6 CDS Workstation Installation Guide Introduction The Agilent OpenLAB CDS Software The Agilent OpenLAB CDS along with OpenLAB Electronic Lab Notebook ELN OpenLAB Enterprise Content Manager ECM and OpenLAB Data Store plus several add ons make up the Agilent OpenLAB software suite These integrated solutions form a system designed to grow with
8. a standalone application OpenLAB Data Analysis is not supported for installations with central data storage Run the Master Installer 2 From the Master Installer screen select Installation 3 OpenLAB Data Analysis requires NET Framework 4 0 on your system If this application is already installed on your PC you will find Microsoft NET Framework 4 components under Start gt Control Panel gt Programs gt Programs and Features 4 To install NET Framework 4 0 a Select Third Party Tools and then Net Framework 4 0 b The NET Framework 4 Setup window opens Accept the license terms to continue Click Install to continue c If NET 4 0 was successfully installed click Finish to return to the Installation screen 5 Select OpenLAB Data Analysis 6 The OpenLAB Data Analysis Installation Wizard opens Read the terms of the License Agreement The Master Installer provides a printable PDF of the license agreement under the Resources option of the main menu 7 Select agree with the terms and conditions You cannot proceed with installation unless you agree to these terms 8 Click Next to proceed to the Installation Folder screen CDS Workstation Installation Guide 23 2 24 Install the Software 9 If you have installed OpenLAB CDS A 01 04 as a single or networked workstation on your PC OpenLAB Data Analysis will be installed as an add on a Torun an installation qualification as part of this installation select Ru
9. ecide on a directory location to store all files related to the data system software including data methods sequences and configurations The directory must always be accessible to the PC running the software If you will be using OpenLAB ECM with your system obtain the ECM server name Make sure you have administrator privileges for both ECM and OpenLAB 4 Decide on the software delivery approach you want to use Install directly from the DVDs to your computer Load the disks as required directly to the workstation disk drive Copy DVDs to a centralized location for installation You can use the utility to copy DVD content to a network share folder or USB drive and run an uninterrupted installation from that location This approach will save time when you install from the folder you won t have to reload the disks 5 Remember that when you launch the application you will be able to review the following PDFs in the installer Planning and Resources menus before you install the software Under the Installer Planning menu you will find OpenLAB CDS Hardware and Software Requirements Use this PDF to determine whether your hardware and software will support the system Workstation Installation Guide An electronic copy of this installation guide is provided in PDF format for your convenience Under the Installer Resources menu you will find OpenLAB CDS Network Requirements Use this PDF to check tha
10. hese terms 7 Select Next to proceed to the Installation Folder screen Installation Folder Screen 1 Type the folder name or browse to the directory where you want to store the application components Installations into the root of a drive may cause problems during operation and are not supported 2 Torun an installation qualification as part of this installation select Run Installation Qualification The Installation Qualification IQ provides documentary evidence that your system has been built and installed correctly and that all design specifications have been met You can run the IQ at a later time if you prefer see Run the IQ After Software Installation on page 42 3 Select Next to proceed to the Installation type screen Installation Type Screens Under Installation Type select Standalone Workstation 2 Select Next to proceed to the CDS Edition screen Select the edition of your data system Select Next to proceed to the installation screens specific to your edition 4 Choose the CDS edition you wish to install CDS Workstation Installation Guide 17 18 Install the Software If you chose OpenLAB ChemStation Edition as your edition Under Installation folder type the folder name or browse to the directory where you want to store the application components Folder names must be entered without spaces ChemStation Edition may not be installed into the same directory as the OpenLAB CDS Shared Server C
11. is already installed this automatically opens the OpenLAB CDS Upgrade Wizard In the Summary screen of the Upgrade Wizard the components for the upgrade are listed 3 Select Upgrading to start the upgrade If an error occurs during the upgrade an error message appears 4 After the upgrade is finished select Finish to close the OpenLAB CDS Upgrade Wizard CDS Workstation Installation Guide 43 www agilent com In This Book This installation guide is designed to help system administrators install the Agilent OpenLAB Chromatography Data System CDS to individual workstations quickly and correctly Agilent Technologies 2010 2011 2012 Printed in Germany 10 2012 M8301 90004 SEE Agilent Technologies
12. kstation Installation Guide 37 4 _ Scripted Installation Uninstallation 1 38 Right click the executable of the command prompt or Power shell prompt and run it as administrator You will get a return code for the scripted uninstallation only if you start it as administrator Navigate to the drive where you have saved the disks For example C CDS_DVD To start the uninstallation call Agilent OpenLab CDSInstaller exe with the following syntax Agilent OpenLab CDSInstaller exe u KeepComponents lt list of components gt q For Example Agilent OpenLab CDSInstaller exe u KeepComponents IQT IOLibraries q With the KeepComponents parameter you can specify a list of shared components that you want to keep on the system see Parameters on page 34 With the command given in the example the OpenLAB CDS components Installation Qualification IQT and IO Library IOLibraries will be kept CDS Workstation Installation Guide Scripted Installation 4 Logging and Tracing All exceptions errors and information messages are logged in the following locations During installation upgrade or repair under lt BaselnstallDirectory gt Logs During uninstallation under lt User s Temp gt lt Company Name gt Logs lt Log folder gt lt Wizard Name gt txt CDS Workstation Installation Guide 39 4 Scripted Installation Logging and Tracing 40 CDS Workstation Installation Guide CDS Workstation Installatio
13. n b c Installation Qualification The Installation Qualification IQ provides documentary evidence that your system has been built and installed correctly You can run the IQ at a later time if you prefer Click Next to proceed to the Summary screen Continue with step 11 10 If you have not installed OpenLAB CDS on your PC OpenLAB Data Analysis will be installed as a standalone application c d e You can use the default folder type a new folder name or browse to the directory where you want to install OpenLAB Data Analysis To run an installation qualification as part of this installation select Run Installation Qualification The Installation Qualification IQ provides documentary evidence that your system has been built and installed correctly You can run the IQ at a later time if you prefer Click Next to proceed to the Installation Type screen Under Data Analysis Installation Type choose Standalone Workstation Click Next to proceed to the Summary screen 11 Click Start to begin installation 12 Click Finish to close the installation wizard CDS Workstation Installation Guide Install the Software 2 What to do Next The basic installation of the data system software is complete There is a 60 day Startup License for this system and the expiration period starts with your first launch of an application To request and download your final software license and add the license file to your system
14. n Guide ee 5 Optional Procedures J e e i e Run the IQ After Software Installation 42 Upgrade OpenLAB CDS Workstation to Latest Version 43 This chapter includes information on how to use the Installation Qualification Tool and how to upgrade your OpenLAB CDS Workstation to a higher version ott Agilent Technologies m 5 Optional Procedures Run the IQ After Software Installation 42 The installation qualification IQ provides documentary evidence that your system has been built and installed correctly and that all design specifications have been met 1 Using your Windows operating system go to Start gt All Programs gt Agilent Technologies gt Installation Qualification Tool 2 Select Qualify The system will run the application and generate an Installation Qualification Report 3 Ifthe report indicates failure verify the computer requirements and reinstall the data system Do not use the system until an Installation Qualification Report gives a pass result CDS Workstation Installation Guide Optional Procedures 5 Upgrade OpenLAB CDS Workstation to Latest Version Using the Master Installer you can easily upgrade your OpenLAB CDS Workstation to a higher version To upgrade your workstation to OpenLAB CDS A 01 04 perform the following steps 1 From the Master Installer Planning screen switch to the Installation screen 2 Select OpenLAB CDS Installation If OpenLAB CDS
15. ore Select the Install OpenLAB Data Analysis check box if you want to install this application in addition to your CDS edition OpenLAB Data Analysis can be installed as add on version at a later time if you prefer see Optional Install OpenLAB Data Analysis as Add on or Standalone Application on page 23 OpenLAB Data Analysis is not supported for installations with central data storage Select the Install 10 Library check box if you want to install the Agilent IO library suite The suite can be installed manually at a later time if you prefer If you chose EZChrom as your edition Select the Install OpenLAB Data Analysis check box if you want to install this application in addition to your CDS edition OpenLAB Data Analysis can be installed as add on version at a later time if you prefer see Optional Install OpenLAB Data Analysis as Add on or Standalone Application on page 23 OpenLAB Data Analysis is not supported for installations with central data storage Confirm the installation of the print server CDS Workstation Installation Guide Install the Software 2 5 Select Next to proceed to the Additional items screen 6 If you want to use OpenLAB ECM with your data system a Check the EM Server option button Type in a server name and press the Test Connection button b The system will perform a connectivity check to verify access to a functional OpenLAB ECM server If the connectivity check is succe
16. present on your system If not it will automatically be installed Select Accept to agree with the license agreement The Master Installer evaluates the products already installed on your system Depending on the installed components the Master Installer will offer one of the following options e Start a fresh installation Upgrade e Repair If a required installable is missing the Master Installer will create an entry in a log file and depending on the component type will continue or rollback the installation A corresponding error code will be returned in such scenarios Preparations You must have copied all disks to a centralized folder see Step 2 Copy DVDs to a Centralized Folder for Installation Optional on page 13 This step is mandatory for scripted installation 1 Right click the executable of the command prompt or Power shell prompt and run it as administrator You will get a return code for the scripted installation only if you start it as administrator 2 Navigate to the drive where you have saved the disks For example C CDS_DVD 3 To start the installation call Agilent OpenLab CDSInstaller exe with the following syntax Agilent OpenLab CDSInstaller exe i ConfigurationXML lt path to xml file gt q For example Agilent OpenLab CDSInstaller exe i ConfigurationXML c settings ConfigurationXML xml q With this command you start the installation wizard without a user interface CDS Wor
17. r a par ticular purpose Agilent shall not be liable for errors or for incidental or consequential damages in connection with the furnishing use or perfor mance of this document or of any information contained herein Should Agilent and the user have a separate written agreement with warranty terms covering the material in this document that conflict with these terms the warranty terms in the sep arate agreement shall control Technology Licenses The hardware and or software described in this document are furnished under a license and may be used or copied only in accor dance with the terms of such license Restricted Rights Legend If software is for use in the performance of a U S Government prime contract or subcon tract Software is delivered and licensed as Commercial computer software as defined in DFAR 252 227 7014 June 1995 or as a commercial item as defined in FAR 2 101 a or as Restricted computer soft ware as defined in FAR 52 227 19 June 1987 or any equivalent agency regulation or contract clause Use duplication or dis closure of Software is subject to Agilent Technologies standard commercial license terms and non DOD Departments and Agencies of the U S Government will receive no greater than Restricted Rights as defined in FAR 52 227 19 c 1 2 June 1987 U S Government users will receive no greater than Limited Rights as defined in FAR 52 227 14 June 1987 or DFAR 252 227
18. see the Software License Installation Guide After you have acquired and installed your final software license you will continue to prepare your data system for operation by end users by configuring projects users and instruments This is accomplished through the OpenLAB CDS Control Panel which features an online help resource For more information please contact your Agilent representative CDS Workstation Installation Guide 25 2 Install the Software What to do Next 26 CDS Workstation Installation Guide CDS Workstation Installation Guide 0006 ee 3 Uninstall the Software amp e j e 7 About Uninstallation 28 Run the Master Installer 29 Run the OpenLAB CDS Uninstallation Wizard 30 This chapter contains information on the uninstallation by using the OpenLAB CDS Uninstallation Wizard ee Agilent Technologies 27 3 Uninstall the Software About Uninstallation Like the installation the uninstallation of OpenLAB CDS is automated by the OpenLAB CDS Master Installer For your convenience Master Installer uses the same user interfaces for the software uninstallation of all OpenLAB CDS configurations standalone or networked workstation The OpenLAB CDS Uninstallation Wizard under the Maintenance section of the Master Installer guides you through the uninstallation steps 28 CDS Workstation Installation Guide Uninstall the Software 3 Run the Master Installer To run the Master Installer on yo
19. ssful the message Connection succeeded appears Click OK to continue If the connectivity test fails you will be returned to the Additional items screen From here you can select Next to run the test again If the test is still unsuccessful Enter a new OpenLAB ECM server and try another test Call internal support for assistance if you cannot connect to an OpenLAB ECM server You can uncheck the box and run the installation without OpenLAB ECM at this time You will be able to add it to your data system at a later time when a server is determined The storage type Data Store Server is only available for Networked Workstation or higher 7 Select Next to proceed to the Summary screen Summary Screen 1 Review the installation settings that you have selected in the preceding steps Select Back as necessary to change installation settings or Cancel to cancel the installation Before starting or canceling the installation you can save an XML file with your installation settings This XML can then be used for a scripted installation see About Scripted Installation on page 32 2 Select Start to begin installation The system performs an automated system check before it proceeds with the listed activities CDS Workstation Installation Guide 19 2 20 Install the Software If a system check passed message appears installation continues If a system check failed message appears you can either Decline to view the
20. t your settings comply with the network requirements CDS Workstation Installation Guide Introduction 1 6 Set up your workstation environment If you are installing OpenLAB CDS to Windows 7 or Windows Vista go to the Windows Control Panel and switch off User Account Control After installation is complete you can switch the controls back on 7 Install all required hardware including any A D boards cables GPIB boards instrument detectors and communication cables CDS Workstation Installation Guide 9 1 Introduction Before You Begin 10 CDS Workstation Installation Guide CDS Workstation Installation Guide ee 2 I hd Install the Software Step 1 Run the Application 12 Step 2 Copy DVDs to a Centralized Folder for Installation Optional 13 Step 3 Run the System Configuration Checker 14 Step 4 Run the OpenLAB CDS Installation Wizard 16 License Agreement Screen 16 Installation Folder Screen 17 Installation Type Screens 17 Summary Screen 19 Optional Install Acrobat Reader 22 Optional Install OpenLAB Data Analysis as Add on or Standalone Application 23 What to do Next 25 The installation is automated for you by the included OpenLAB CDS Master Installer This tool installs the various components of OpenLAB CDS OpenLAB Data Analysis can also be installed as add on version or standalone application GE Agilent Technologies 11 2 Install the Software Step 1 Run the Application To run the application for
21. ted by comma Component Name Id Installation Qualification IOT Microsoft SOL Server SQLServer 10 Library IOLibraries q Silent mode no installation or uninstallation wizard will be shown CDS Workstation Installation Guide Scripted Installation 4 Return Codes After installation in the command line mode the system will return a number code which is explained below Table 2 Return codes for installation upgrade or repair Error Return Code Return value Unknown default 1 Success 0 CoreComponentFailure 1 NonCoreComponentFailure 2 TestConnectivityFailure 3 ExpectedWindowslnstallerNotlnstalled WI 4 5 missing 4 ParameterMismatchError 5 CannotProceedWithFreshInstallation 6 CannotProceedWithUpgrade 7 CannotProceedWithRepair 9 CannotProceedWithReRegistration 10 ReRegistrationNotSupported 11 IncompleteTopologyFound 12 InvalidUNCPath 13 MissingInstallable 14 NotAStrongPassword 15 DowngradeNotSupported 16 RestartRequired 17 InvalidInputXML 19 InvalidMode 20 SitePrepFailure 21 CDS Workstation Installation Guide 35 36 4 Scripted Installation Table 3 Return codes for uninstallation Error Return Code Return value Unknown default 1 Success 0 CannotProceedWithUninstallation 8 RegistryCleanupError 18 CDS Workstation Installation Guide Scripted Installation 4 Installation Upgrade or Repair In installation mode the OpenLAB CDS Master Installer checks if Net framework is
22. the OpenLab CDS Installation Wizard 2 Follow the instructions as described under Install the Software in this manual 3 When you have reached the Summary screen click the icon e on the top right corner to export the installation parameters to XML Save the file ona physical drive Installation file and XML file must not be in the same file path You can now use the XML file for the scripted installation CDS Workstation Installation Guide 33 4 Scripted Installation Parameters and Return Codes 34 Parameters You can call Agilent OpenLAB CDSInstaller exe in command line mode with the following parameters i Installation upgrade or repair u Uninstallation ConfigurationXML lt ConfigurationXMLFilePath gt The XML file contains all required inputs of the Master Installer to install upgrade or repair a certain topology see Export as XML on page 33 Replace lt ConfigurationXMLFilePath gt with the correct file path and XML file name Do not enter a blank before or after the equals sign The scripted installation and uninstallation mode will not work as expected KeepComponents Optional parameter for the uninstallation process which can contain one or more shared components that should stay on your system Without this parameter all OpenLAB CDS components will be removed from your system To keep certain shared components list the according IDs from the table below in double quotes and separa
23. the first time on your workstation 1 For the direct DVD approach insert the OpenLAB CDS Installation disk Autorun inf will automatically run Agilent OpenLABCDSSetupFromDVD exe and display the installer Planning screen 2 For the portable data storage device approach insert the device in a computer USB port navigate to Disk1 Setup bat and run the application to proceed to the Planning screen 3 For the share file approach copy all DVDs to a centralized folder as described in Step 2 below 12 CDS Workstation Installation Guide Install the Software 2 Step 2 Copy DVDs to a Centralized Folder for Installation Optional Completing this step will enable you to run an uninterrupted installation directly from a folder i e you will not have to load individual disks during actual installation 1 From the Master Installer Planning screen select Installation from the sidebar menu 2 Select Preparation of an Installation from Network Share 3 At the Network Share screen browse to a directory and create a destination folder as follows Installations into the root of a drive may cause problems during operations and are not supported a Select the button with the three dots b Navigate to the directory where you want to create the folder you can navigate to a USB drive port to create the folder on a USB drive c Select Make New Folder d Type in the folder name e Select OK The system will return you to the Ne
24. tion System details by typing in the fields provided System Location fields System Information fields e Configuration fields The regional settings must be configured to use the dot as a decimal separator 5 Review the system details and make any necessary entries The system will follow the paths specified 14 CDS Workstation Installation Guide Install the Software 2 6 Select the green check mark icon in the top left corner of the screen to begin the software check A summary report is displayed showing the results for each check category Results are expressed as Pass Warning Critical Warning or Fail Fail results must be corrected before continuing with the installation Agilent recommends investigating and correcting any Critical Warnings and Warnings whenever possible before proceeding 7 To view details of the report select the appropriate link System Hardware Details Operating System and Software Details or Manual Verification Required 8 To save the report select the Save icon at the top left of the screen E mail the saved report to your Agilent Service Representative for evaluation and for validation of your personal computer for Agilent Software Systems Installs CDS Workstation Installation Guide 15 2 Install the Software Step 4 Run the OpenLAB CDS Installation Wizard 16 At this point you ll either be running your installation using the DVDs directly or from a centralized loca
25. tion USB drive or share folder The installation steps are identical until you start the installation wizard you won t be prompted to load the DVDs if you re installing from a centralized location License Agreement Screen 1 From the OpenLAB CDS Master Installer screen select Installation 2 Ifyou want to install OpenLAB Data Analysis NET Framework 4 0 must be installed on your system a Select Third Party Tools and then Net Framework 4 0 b The NET Framework 4 Setup window opens Accept the license terms to continue Click Install to continue c If NET 4 0 was successfully installed click Finish to return to the Installation screen 3 Select OpenLAB CDS 4 If NET 3 5 SP1 or higher is not on your system the Agilent OpenLAB CDS Prerequisites Setup Screen appears a Read the licensing agreement b Select Accept to accept the agreement and begin NET 3 5 SP1 installation If you select Don t Accept at this screen the install program will exit You will have to install NET 3 5 SP1 or higher at a later time to proceed with OpenLAB CDS installation 5 The OpenLAB CDS Installation Wizard opens Read the terms of the License Agreement Master Installer provides a printable PDF of the license agreement under the Resources option of the main menu CDS Workstation Installation Guide Install the Software 2 6 Select agree with the terms and conditions You cannot proceed with installation unless you agree to t
26. twork Share screen with the path displayed f Select the disks you want to copy to the folder All disks ChemStation disks EZChrom disks or OpenLAB Data Analysis disks g Select Start h Follow the prompts to insert new disks as they appear When processing is complete copy the files to the local drive or map the location to a network drive Close the application and navigate to the directory and folder you created Open the folder Select the Disk 1 folder then execute Setup bat to run the application The system will display the installer Planning screen CDS Workstation Installation Guide 13 2 Install the Software Step 3 Run the System Configuration Checker 1 At the Planning screen select System Configuration Checker If NET 3 5 SP1 or higher is not on your system the Agilent OpenLAB CDS Prerequisites Setup Screen appears a Read the licensing agreement b Select Accept to accept the agreement and begin NET 3 5 SP1 installation If you select Don t Accept at this screen the install program will exit You will have to install NET 3 5 SP1 or higher manually to proceed with OpenLAB CDS installation 2 The Site Preparation Tool opens Select the correct edition and setup of the OpenLAB CDS software you are installing from the drop down list OpenLAB CDS ChemStation Edition C 01 XX OpenLAB CDS EZChrom Edition A 04 XX OpenLAB Data Analysis A 01 XX 3 Select OK 4 Complete page 1 of the Contact Informa
27. ur workstation choose one of the following approaches e Torun the uninstallation from disk insert the OpenLAB CDS Installation disk Disk 1 Autostart will automatically run Agilent OpenLABCDSSetupFromDVD exe and display the installer Planning screen e For the portable data storage device approach insert the device in a computer USB port navigate to Disk1 and run Setup bat to proceed to the Planning screen For the share file approach copy the contents to the local drive and navigate to the respective share file folder Then navigate to Disk1 and run Setup bat to proceed to the Planning screen CDS Workstation Installation Guide 29 3 Uninstall the Software Run the OpenLAB CDS Uninstallation Wizard 1 From the Master Installer Planning screen select Maintenance from the side bar menu 2 Select OpenLAB CDS Uninstallation The OpenLAB CDS Uninstallation Wizard opens 3 In the Shared Components screen check the Uninstall Installation Qualification check box Note IQ needs to be uninstalled if you wish to re install OpenLAB CDS ata later time In the Summary screen under Uninstallation of OpenLAB CDS Components there is a list of the components you want to uninstall 4 Select Start to start the uninstallation If you want to abort the uninstallation select Cancel If you want to change any settings select Back All listed components are automatically uninstalled one after another 5 When the uninstallation
Download Pdf Manuals
Related Search
Agilent OpenLAB Chromatography Data System (CDS) Workstation Installation guide