LINKSYS CIT200 user manual
Contents
1. Do not use this product near water laundry tub in a wet basement or near a swimming pool Do not place this product on an unstable table The product may fall and be damaged This product should never be placed near or over a radiator or heat register This product should be operated only from the type of power source indicated on the label Do not allow anything to rest on the power cord Do not locate this product where the cord will be abused by persons walking on it Do not overload wall outlets and extension cords as this can result in the risk of fire or electric shock Avoid using a telephone during an electrical storm There may be a remote risk of electric shock from lightning Do not use this product to report a gas leak in the vicinity of the leak Do not use this product near intensive care medical equipment or by persons with pacemakers Due to the radio signals between base station and handset wearers of hearing aids may experience interference in the form of a humming noise BATTERIES Use only the battery type listed in the instruction manual Do not use lithium batteries or non rechargeable batteries that may damage the handset and charger Do not dispose of the battery in a fire as they can explode Do not open or mutilate the battery Released electrolyte is corrosive and can cause damage to the eyes or skin It can be toxic if swallowed Avoid contact with metal objects when handling2. the hand set you must have SKYPE installed and running on your PC After the handset is charged and SKYPE is installed on your PC press the SKYPE button on your phone to view your contact list and make calls Internet access Is required to utilize SKYPE After files are installed on your PC the Setup Wizard will conclude Click the Online Registration button to register this product or the Exit button to close the Setup Wizard After you open the SKPYE application on your PC the following screen will appear Select Allow this application to use SKYPE and click OK Congratulations The Cordless Internet Telephony Kit is installed Cordiess Internet Telephony Kii 5 Skype S Another program wants to use Skype i WARNA A changed program is i to anness Skype hak would you ike bo do tn Hare CITZOO ecce A Pillow thes program to use Skype Allow tha program Eo usa Skypa but ak again inthe future Dona akow thet program bo une Skypa beets at Ben da at Before you use the Cordless Internet Telephony Kit please make sure you Have SKYPE installed and running on your PC Have connected the Telephony Kit properly Have charged the hand set BEFORE USING YOUR TELEPHONE EQUIPMENT BASIC SAFETY PRECAUTIONS SHOUD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE ELECTRIC SHOCK AND INJURY INCLUDING THE FOLLOWING Read and follow all warnings and instructions marked on the product
3. LINKSYS A Division of Cisco Systems Inc Model No CIT200 Package Contents e Handset e 2 NiMH batteries e Charger with Power Adapter e USB Base Station with 5 foot USB Cable e Quick Installation e Setup Wizard CD with Skype Software e Registration Information Card CISCO SYSTEMS Remove the Setup CD ROM from the Telephony Kits box and place it in your PC s CD ROM drive The Setup Wizard should run automatically and the Welcome screen should appear From the Welcome screen select the lan guage in which you want the Setup Wizard to appear from the pull down menu Then click the Next button Cordiess intamet Telephony Ful tome EIT 200 From the next screen that LINKSYS appears click the Click Here to Start button Cordless Intemet telephony Ki vos ve CIT2O0 Read the License Agree ment by scrolling down the screen Then click Accept the agreement Click Next to continue the installation As shown on the next screen connect the USB Base Station to your PC s USB port Then click the Next button to continue As shown on the next screen insert the batter ies into the handset and place the handset on the charger Ihe phone should charge for at least 14 hours before use Click the Next button to con tinue Read the cautions on the following screen before clicking the Next button to continue and the Wiz ard will start coping files to your PC Before using
4. com Website http www linksys com or http support linksys com RMA Return Merchandise Authorization http www linksys com support FTP Site ftp ftp linksys com Sales Information 800 546 5797 800 LINKSYS Linksys is a registered trademark or trademark of Cisco Systems Inc and or its affiliates in the U S and certain other countries Copyright 2005 Cisco Systems Inc All rights reserved CIT200 QI 50722 KL
5. the battery These objects could short out the batteries or cause the conductor to overheat resulting in burns Do not attempt to recharge the battery cell by heating it Sudden release of battery electrolyte can cause burns or irritation to the eyes or skin Observe the proper polarity or direction of any battery Reverse insertion of the battery cell can result in leakage or explosion Remove the battery cells if you do not plan to use the product for several months at a time Discard any dead batteries because they are likely to leak into the product Do not store this product or the battery in a high temperature area Battery stored in a freezer or refrigerator should be protected from condensation during storage and defrosting Battery should be stabilized at room temperature before using Your battery is rechargeable and can be recycled once it outlives its usefulness Depending upon your local and state law it might be illegal to dispose of this battery into a municipal waste system Check with your local solid waste company for more information on your recycling options for the battery cells SAVE THESE INSTRUCTIONS l INKSYS A Division of Cisco Systems Inc For additional information or troubleshooting help refer to the User Guide on the Setup CD ROM You can also call or email for further support 24 hour Technical Support 800 326 7114 toll free from US or Canada E mail Support support linksys
Download Pdf Manuals
Related Search
LINKSYS CIT200 user manual linksys router user manual linksys router manual pdf