Home

SAMSUNG SPE-400 USER MANUAL

1. 4 When done click Apply HEZE PTZ setup You can activate the zoom and set the zoom preset as you want 1 Select the lt Audio amp Video IE gt tab from Setup menu 2 Click the lt PTZ setup gt 3 Set the preset and serial port e Preset setup Select a number out of 255 and click Move button to adjust the camera to the angle defined by the selected preset However you can specify up to 128 presets for Samsung E protocols The connected camera should be configured to allow serial port communication z s e Serial Setup You can set the RS 485 communication mode of the connected camera The camera and device are connected via RS 485 communication ports The camera will not perform properly if communication related settings of the connected camera are incorrect SAMSUNG T E and Pelco P D protocols are supported 4 When done click Apply 46_ setup screen To add a preset 1 2 3 To delete a preset 1 2 Select the preset number to add Set the name for the preset Press the Add IE button Select the preset number to delete Press the Delete GE button NAAYOS dNLAS To move the preset 1 2 Select the preset number to move Press the Move button NETWORK SETUP Interface 1 2 3 From the Setup menu select the Network E gt tab Click lt Interface gt Set the lt Interface gt and lt IPv6 setup
2. NAAYOS dNLAS Registering with DDNS To register your product with the Samsung DDNS 1 Visit the iPOLIS web site www samsungipolis com and sign in with a registered account English 49 setup Screen 2 From the top menu bar select lt DDNS SERVICE gt lt MY DDNS gt 3 Click PRODUCT REGISTRATION 4 Enter the product domain You must perform the duplicate check for the domain that you entered 5 Select a lt CLASSIFICATION gt and specify the lt MODEL NUMBER gt 6 Specify the product location with a description if necessary 7 Click REGISTRATION The product will be added to the prod tem uct list that you can check rn To connect to the Samsung DDNS in network encoder setup 1 From the DDNS setup page set lt DDNS gt to lt Samsung DDNS gt 2 Provide the lt Host name gt that you specified when registering the product domain with the DDNS site 3 Click Apply Jl When the comnection is successfully made you will see the message of Success on the screen 50 setup screen Configuring public DDNS in Network encoder Settings 1 Open the DDNS settings page and select lt Public DDNS gt for lt DDNS gt 2 Enter the corresponding site s host name user name and password 3 Click Apply EEZ button If the connection properly establishes lt Success gt appears 4 Once completed with the configuration click App
3. 11 Patents A contributor is a copyright holder who authorizes use under this License of the Program or a work on which the Program is based The work thus licensed is called the contributor s contributor version A contributor s essential patent claims are all patent claims owned or controlled by the contributor whether already acquired or hereafter acquired that would be infringed by some manner permitted by this License of making using or selling its contributor version but do not include claims that would be infringed only as a consequence of further modification of the contributor version For purposes of this definition control includes the right to grant patent sublicenses in a manner consistent with the requirements of this License Each contributor grants you a non exclusive worldwide royalty free patent license under the contributor s essential patent claims to make use sell offer for sale import and otherwise run modify and propagate the contents of its contributor version In the following three paragraphs a patent license is any express agreement or commitment however denominated not to enforce a patent such as an express permission to practice a patent or covenant not to sue for patent infringement To grant such a patent license to a party means to make such an agreement or commitment not to enforce a patent against the party If you convey a co
4. 8083 VNP Port 4522 VNP Port 4523 RTSP Port 3002 RTSP Port 3003 Policy Server Port 943 Policy Server Port 32_ network connection and setup 943 943 e You can set a rule of Port Forwarding on the Broadband Router device through its configuration web page e You cannot change the Silverlight policy server port of a network encoder e You can change the ports of the network encoder except the policy server port through its configuration web pages CONNECTING TO THE NETWORK ENCODER FROM A SHARED LOCAL PC 1 Run the IP Installer It will scan for connected network encoders and display a list of them 2 Double click a network encoder to ac cess The Internet browser starts and connects to the network encoder dNLAS ANY NOILOANNOS MHOMLAN g m Access to the network encoder can also be gained by typing the network encoder s IP address in the address bar of the Internet browser CONNECTING TO THE NETWORK ENCODER FROM A REMOTE PC VIA THE INTERNET Since using the IP Installer on a remote computer that is not in the Broadband Router s network cluster is not allowed users can access network encoders within a Broadband Router s network by using the network encoder s DDNS URL 1 Before you can access a network encoder in the Broadband Router network you should have set the port range forward for the Broadband Router 2 From the remote PC launch the Internet br
5. MD e NO 10 11 12 13 14 Read these instructions Keep these instructions Heed all warnings Follow all instructions Do not use this apparatus near water Clean only with dry cloth Do not block any ventilation openings Install in accordance with the manufacturer s instructions Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus Only use attachments accessories specified by the manufacturer Use only with the cart stand tripod bracket or table specified by he manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid A injury from tip over Unplug this apparatus during lighting storms or when unused for ong periods of time Refer all servicing to qualified service personnel Servicing is required when the apparat
6. Use authentication Select whether to use authorization User ID Enter the user ID for logging into the email server Password Enter the user account password for logging into the email server Port The default port of the email server is 25 however you can use a different port number according to the email server settings Recipient Enter the address of the email recipient Sender Enter the address of the email sender If the sender address is incor rect the email from the sender may be classified as SPAM by the email server and thus may not be sent Subject Enter a subject for your email Body Provide the text for the massage Attach the alarm images to the email that you are preparing 4 When done click Apply EEZ NAAYOS dNLAS SD record You can set the record conditions or the use of recording for the SD memory check the size of stored data or format the SD memory itself Only SD memory contents in channel 1 can be played Channels 2 through 4 do not support SD memory recording or playback From the Setup menu select the lt Event E gt tab 2 Click lt SD record gt English 53 setup screen To make recording on the SD memory 1 Check the lt Total sizes and the Free sizes 2 If the SD memory has a sufficient free space set Records to lt On gt Otherwise check the stored data and if you find them not important then click lt Form
7. GPL LGPL SOFTWARE LICENSE The software included in this product contains copyrighted software that is licensed under the GPL LGPL You may obtain the complete Corresponding Source code from us for a period of three years after our last shipment of this product by sending email to help cctv samsung com If you want to obtain the complete Corresponding Source code in the physical medium such as CD ROM the cost of physically performing source distribution might be charged e GPL SW Base Kernel Busybox Sysvinit dosfstools e LGPL S W gLibc Inetutils GNU GENERAL PUBLIC LICENSE Version 2 June 1991 Copyright C 1989 1991 Free Software Foundation Inc 51 Franklin Street Fifth Floor Boston MA 02110 1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document but changing it is not allowed Preamble The licenses for most software are designed to take away your freedom to share and change it By contrast the GNU General Public License is intended to guarantee your freedom to share and change free software to make sure the software is free for all its users This General Public License applies to most of the Free Software Foundation s software and to any other program whose authors commit to using it Some other Free Software Foundation software is covered by the GNU Lesser General Public License instead You can apply it to your programs too When we speak of free so
8. SAMSUNG TECHWIN NETWORK ENCODER User Manual SPE 400 CE Pung Network Encoder User Manual Copyright 2011 Samsung Techwin Co Ltd All rights reserved Trademark lt Q samsung TECHWIN is the registered logo of Samsung Techwin Co Ltd The name of this product is the registered trademark of Samsung Techwin Co Ltd Other trademarks mentioned in this manual are the registered trademark of their respective company Samsung Techwin Co Ltd shall reserve the copyright of this document Under no circumstances this document shall be reproduced distributed or changed partially or wholly without formal authorization of Samsung Techwin Disclaimer Samsung Techwin makes the best to verify the integrity and correctness of the contents in this document but no formal guarantee shall be provided Use of this document and the subsequent results shall be entirely on the user s own responsibility Samsung Techwin reserves the right to change the contents of this document without prior notice Warranty If the product does not operate properly in normal conditions please let us know Samsung Techwin will resolve the problem for free of charge The warranty period is 3 years However the followings are excluded If the system behaves abnormally because you run a program irrelevant to the system operation e Deteriorated performance or natural worn out in process of time overview IMPORTANT SAFETY INSTRUCTIONS
9. You should have received a copy of the GNU Lesser General Public License along with this library if not write to the Free Software Foundation Inc 51 Franklin Street Fifth Floor Boston MA 02110 1301 USA Also add information on how to contact you by electronic and paper mail You should also get your employer if you work as a programmer or your school if any to sign a copyright disclaimer for the library if necessary Here is a sample alter the names Yoyodyne Inc hereby disclaims all copyright interest in the library Frob a library for tweaking knobs written by James Random Hacker signature of Ty Coon 1 April 1990 Ty Coon President of Vice OpenSSL LICENSE Copyright c 1998 2006 The OpenSSL Project All rights reserved Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met pari Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer 2 Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution w All advertising materials mentioning features or use of this software must display the following acknowledgment This product includes software developed by the OpenSSL Project fo
10. original authors reputations Finally any free program is threatened constantly by software patents We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses in effect making the program proprietary To prevent this we have made it clear that any patent must be licensed for everyone s free use or not licensed at all The precise terms and conditions for copying distribution and modification follow TERMS AND CONDITIONS FOR COPYING DISTRIBUTION AND MODIFICATION Version 2 June 1991 Copyright C 1989 1991 Free Software Foundation Inc 51 Franklin S O This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of his General Public License The Program below refers to any such program or work and a work based on he Program means either the Program or any derivative work under copyright aw that is to say a work containing the Program or a portion of it either verbatim or with modifications and or translated into another language Hereinafter ranslation is included without limitation in the term modification Each licensee is addressed as you Activities other than copying distribution and modification are not covered by this License they are outside its scope The act of running the Program is not restricted and the output from the Program is covered only i
11. EXPRESSED OR IMPLI WARRANT ollowing ion he name derived disclaimer College London of the University nor of th rom this software withou HANTABILITY AND DISCLAIMED IN NO EVENT SHALL THE AU DIRECT INDIRECT INCLUDI AND ON ANY THEO INCLUDI SOFTWAR G BUT E EVEN NCI OT DENTAL SPECIAL T LIMITED TO PROCU RY OF LIABILITY WHETI G NEGLIGENCE OR OTHERWISE e Department may be used EXEMPLARY OR CONSEQ Redistributions of source code must retain the above copyright notice this list of conditions Redistributions in binary form must reproduce the above copyright notice this list of conditions ollowing disclaimer in the documentation and or other materials provided with the erials mentioning features or use of this software must display the following This product includes software developed by the Computer Science o endorse or promote specific prior written permission PROVIDED BY THE AUTHORS AND CONTRIBUTORS AS S AND ANY ED WARRANTIES INCLUDING BUT NOT LIMITEI IES OF MERC D TO THE IMPLIED FITNESS FOR A PARTICULAR PURPOSEARE THORS OR CONTRIBUTOR S BE LIABLE FOR ANY UENTIAL DAMAGES REMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HO HER IN CONTRACT STRICT WEVER CAUSED T LIABILITY OR TORT ARISING IN ANY WAY OUT T OF THE USE OF THIS F ADVISED OF THE POSSIBILITY OF SUCH DAMAGE
12. Firefox Google Chrome Apple Safari Central Management NET i viewer Software Operating Temperature Po 4020 4329F 104 F 2096 80 RH Environmental Humidity Ingress Protection Input Voltage DC12V Electrical Power Consumption Max 15W Color Material Silver Metal Mechanical Dimensions WxHxD W178 x H34 x D128mm 7 00 x 1 34 x 5 04 Weight 5629 64 appendix TROUBLESHOOTING PROBLEM SOLUTION e Check whether the lt Network gt settings of the network encoder are valid and correct e Check to make sure that all network cables have been connected properly I can t access the network e If connected using DHCP verify that the network encoder is able to encoder from a web browser XIGNAddv acquire dynamic IP addresses without any problem e If connected using a DDNS URL verify that the MAC address has been properly entered e If the network encoder is connected to a Broadband Router verify that port forwarding is properly configured Viewer got disconnected during monitoring e The existing Web Viewers connection can be expired if the network setting or configuration of the network encoder is modified by another user Check all network connections e lt Web Viewers connection may be interrupted by poor network traffic or condition if the network encoder is connected to a PPPoE network I cannot connect to the system using a tab browser of Internet Explorer 7 0 e
13. Port forwarding for the network encoder If the network encoder SPE 400 is connected to the router you must set the port forwarding for any one channel of the network encoder SPE 400 to port no TCP 943 O Ifyou don t set properly the TCP 943 port of the router you cannot get any video stream from the web page of the network encoder TCP 943 port is a port for the Silverlight policy server of a network encoder Ex If the network encoder SPE 400 is connected to the router Jel 2 Broadband Router End Protocol IP Address 943 TCP 192 168 1 100 CP U DP 92 68 1 0 CP U DP 92 68 1 CP U DP 92 68 1 CP U DP 92 68 1 CP U DP 92 68 1 CP U DP 92 68 1 CP U DP 92 68 1 CP U DP 92 68 1 CP U DP 92 68 1 CP U DP 92 68 1 CP U DP 92 68 1 0 0 0 0 0 0 0 0 0 0 5 N 5 N 5 CP U CH 3 192 168 1 102 DP 92 68 1 o co CH 1 192 168 1 100 Web Server Port 8080 VNP Port 4520 RTSP Port 3000 Policy Server Port 943 CH 2 192 168 1 101 Web Server Port 8081 VNP Port 4521 RTSP Port 3001 Policy Server Port CH 4 192 168 1 103 Web Server Port 8082 Web Server Port
14. entirely from distribution of the Program If any portion of this section is held invalid or unenforceable under any particular circumstance the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances It is not the purpose ol this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims this section has the sole purpose of protecting the integrity of the free software distribution system which is implemented by public license practices Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system it is up to the author donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License 8 If the distribution and or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries so that distribution is permitted only in or among countries not thus excluded In such case this License incorporates the limitation as if written in the body
15. regardless of the status of the particular user or of the way in which the particular user actually uses or expects or is expected to use the product A product is a consumer product regardless of whether the product has substantial commercial industrial or non consumer uses unless such uses represent the only significant mode of use of the product Installation Information for a User Product means any methods procedures authorization keys or other information required to install and execute modified versions of a covered work in that User Product from a modified version of its Corresponding Source The information must suffice to ensure that the continued unctioning of the modified object code is in no case prevented or interfered with solely because modification has been made f you convey an object code work under this section in or with or specifically for use in a User Product and the conveying occurs as part of a transaction in which the right of possession and use of the User Product is transferred to the recipient in perpetuity or for a fixed term regardless of how the transaction is characterized the Corresponding Source conveyed under this section must be accompanied by the Installation Information But this requirement does not apply if neither you nor any third party retains the ability to install modified object code on the User Product for example the work has been installed in ROM The requi
16. Default Gateway 192 168 xxx 1 gouv g For the address of the Broadband Router refer to the product s documentation Refer to the Port Range Forward Port Mapping Setup section of the Broadband Router s documentation Page 31 English 25 network connection and setup BUTTONS USED IN IP INSTALLER 3 4 No Device Name Mode MAC 1 SPEAN Sak Tae o Item Description o Model name of the connected network encoder Device Name Click the column to sort the list by model name NU However search will be stopped if clicked during the search a Mode Displays either lt Static gt or lt Dynamic gt for the current network connection c status UU Ethernet address for the connected network encoder oe Click the column to sort the list by Ethernet address E However search will be stopped if clicked during the search P address F Click the column to sort the list by IP address 4 Na However search will be stopped if clicked during the search he factory default is 192 168 1 100 103 per letwork setting for the network encoder 5 Protocol he factory default is IPv4 Network encoders with the IPv6 setting will be displayed IPv6 6 UPnP Status his function is not currently implemented 26_ network connection and setup dNLAS ANY NOILOANNOS MHOM
17. For both users and authors sake the GPL requires that modified versions be marked as changed so that their problems will not be attributed erroneously to authors of previous versions Some devices are designed to deny users access to install or run modified versions of the software inside them although he manufacturer can do so This is undamentally incompatible with the aim of protecting users freedom to change he software The systematic pattern of such abuse occurs in the area of products or individuals to use which is precisely where it is most unacceptable Therefore we have designed this version of the GPL 0 prohibit the practice for those products f such problems arise substantially in other domains we stand ready to extend his provision to those domains in future versions of the GPL as needed to protect he freedom of users Finally every program is threatened constantly by software patents States should not allow patents to restrict development and use of software on general purpose computers but in those hat do we wish to avoid the special danger hat patents applied to a free program could make it effectively proprietary To prevent this the GPL assures that patents cannot be used to render the program non ree The precise terms and conditions for copying distribution and modification ollow TERMS AND CONDITIONS 0 Definitions This License refers to version 3 of the GNU Gener
18. The meaning of the using sign in the book is following e Reference In case of providing information for helping of product s usages e Notice If there s any possibility to occur any damages for the goods and human caused by not following the instruction X Please read this manual for the safety before using of goods and keep it in the safe place 6_ overview This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment FE C This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense Samsung Techwin cares for the environment at all product manufacturing stages and is C taking measures to provide customers with more environmentally friendly products eco The Eco mark represents Samsung Techwin s devotion to creating environmentally friendly RoHS compliant products and indicates that the product satisfies the EU RoHS Directive Correct Disposal of This Product Waste Electrical amp Ele
19. You need not require recipients o copy the Corresponding Source along with the object code If the place to copy he object code is a network server he Corresponding Source may be on a different server operated by you or a third party that supports equivalent copying facilities provided you maintain clear directions next to the object code saying where to find the Corresponding Source Regardless of what server hosts the Corresponding Source you remain obligated to ensure that it is available for as long as needed to satisfy these requirements e Convey the object code using peer to peer transmission provided you inform other peers where the object code and Corresponding Source of the work are being offered to the general public at no charge under subsection 6d A separable portion of the object code whose source code is excluded from the Corresponding Source as a System Library need not be included in conveying the object code work 2 A User Product is either 1 a consumer product which means any tangible personal property which is normally used for personal family or household purposes or 2 anything designed or sold for incorporation into a dwelling In determining whether a product is a consumer product doubtful cases shall be resolved in favor of coverage For a particular product received by a particular user normally used refers to a typical or common use of that class of product
20. accept this License Therefore by modifying or distributing the Program or any work based on the Program you indicate your acceptance of this License o do so and all its terms and conditions or copying distributing or modifying the Program or works based on it Each time you redistribute the Program or any work based on the Program the recipient automatically receives a icense from the original licensor to copy distribute or modify the Program subject o these terms and conditions You may not impose any further restrictions on the recipients exercise of he rights granted herein You are not responsible for enforcing compliance by third parties to this License If as a consequence of a court judgment or allegation of patent infringement or for any other reason not limited to patent issues conditions are imposed on you whether by court order agreement or otherwise that contradict the conditions of this License they do not excuse you rom the conditions of this License If you camnot distribute so as to satisfy simultaneously your obligations under his License and any other pertinent obligations then as a consequence you may not distribute the Program at all For example if a patent license would not permit royalty free redistribution of he Program by all those who receive copies directly or indirectly through you then the only way you could satisfy both it and this License would be to refrain
21. and the following disclaimer 2 Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution 3 All advertising materials mentioning features or use of this software must display the following acknowledgement This product includes cryptographic software written by Eric Young eay cryptsoft com The word cryptographic can be left out if the rouines from the library being used are not cryptographic related A If you include any Windows specific code or a derivative thereof from the apps directory application code you must include an acknowledgement This product includes software written by Tim Hudson tjh cryptsoft com THIS SOFTWARE IS PROVIDED BY T m D gt C g a O 5 O pi Q O Z po fas S O 0 w wD m PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION H TI CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE The licence and distribution terms for any publically available version or derivative of this code cannot be changed i e this code cannot simply be copied and put under another distribution lic
22. area set To delete set area click Delete laa button 6 When done click Apply RZ 56_ setup screen Time schedule You can configure so that an event will occur at a scheduled time regardless of the actual occurrence of the event 1 From the Setup menu select the lt Event E gt tab 2 Click lt Time schedule gt To set the timer event NAAYOS dNLAS 1 Set lt Timer event setup gt to lt Enable gt 2 Specify the lt Activation time gt e Always Always activates in operated mode at the set interval e Only scheduled time Periodically activates in operated mode at a specified time and date 3 Specify the lt Transfer intervals 4 Specify the activation conditions e FTP sending Specify the use of the FTP transfer if an event occurs e Record Specify the use of recording if an event occurs 5 When done click Apply BEZE Video loss You can set the alarm to be generated on a camera disconnection which causes a video loss 1 From the Setup menu select the lt Event E gt tab 2 Click lt Video loss gt 3 Specify the lt Video loss gt e Enable Sets whether to activate video loss detection 4 Set the activation time and condition e Refer to the Alarm Input for how to set the lt Activation time gt and lt Action gt page 55 5 When done click Apply SRA English 57 setup screen SYSTEM SETUP Product inf
23. constitutes a covered work This License acknowledges your rights of fair use or other equivalent as provided by copyright law You may make run and propagate covered works that you do not convey without conditions so long as your license otherwise remains in force You may convey covered works to others for the sole purpose of having them make modifications exclusively for you or provide you with facilities for running those works provided that you comply with the terms of this License in conveying all material for which you do not control copyright Those thus making or running the covered works for you must do so exclusively on your behalf under your direction and control on terms that prohibit them from making any copies of your copyrighted material outside their relationship with you Conveying under any other circumstances is permitted solely under the conditions stated below Sublicensing is not allowed section 10 makes it unnecessary 3 Protecting Users Legal Rights From Anti Circumvention Law No covered work shall be deemed part of an effective technological measure under any applicable law fulfilling obligations under article 11 of the WIPO copyright treaty adopted on 20 December 1996 or similar laws prohibiting or restricting circumvention of such measures When you convey a covered work you waive any legal power to forbid circumvention of technological measures to the extent such circumvention is effected
24. covered work you indicate your acceptance of this License to do so 10 Automatic Licensing of Downstream Recipients Each time you convey a covered work the recipient automatically receives a license rom the original licensors to run modify and propagate that work subject to this License You are not responsible for enforcing compliance by third parties with this License An entity transaction is a transaction ransferring control of an organization or substantially all assets of one or subdividing an organization or merging organizations f propagation of a covered work results rom an entity transaction each party to that ransaction who receives a copy of the work also receives whatever licenses to the work he party s predecessor in interest had or could give under the previous paragraph plus aright to possession of the Corresponding Source of the work from the predecessor in interest if the predecessor has it or can get it with reasonable efforts You may not impose any further restrictions on the exercise of the rights granted or affirmed under this License For example you may not impose a license fee royalty or other charge for exercise of rights granted under this License and you may not initiate litigation including a cross claim or counterclaim in a lawsuit alleging that any patent claim is infringed by making using selling offering for sale or importing the Program or any portion of it
25. displayed in the Viewer 2 Click the button This will fit the Viewer to the full screen 3 To exit the full screen mode press Esc on the keyboard English 41 YAMGIA GAM web viewer PLAYBACK Only SD memory contents in channel 1 can be played Channels 2 through 4 do not support SD memory recording or playback 1 Click the Playback E button nun POLIS CERN aN NY 2 Specify the start time and end time of fee DD Os your search GED DG 0G 3 Select a search type Emn HG NG UBO oo 0G 4 Click the Search EE button The search results will be displayed in the list g f more than 500 events are recorded within the search period your search will be limited up to the date when the 500th event is recorded For instance if the search period is between 10th and 15th day of the month and more than 800 events were recorded 10th through 11th your search will be limited up to 11th day with a total of 800 events and events after then from 12th will not be found 5 Select a data item to play in the search list 6 Click the Play 8 button 7 To stop playing the video click Stop OD To return to the search screen click Exit BEH To check time information of the playing video 1 Click the About E button 2 Date and time information appears on the screen 42_ web viewer To back up the searched video 1 Click E on the scene to back up Sa
26. or FTP site Only the MJPEG codec can be set as the E mail FTP Profile e Record profile This is the profile that is applied to video recording 5 When done click Apply RAM NG Profiles using H 264 codec can be stored in the SD memory only in resolutions of 640x480 or less MPEG 4 videos can not be stored in the SD memory 44 setup screen To add a video profile You can add as many codecs as necessary so that a variety of profiles can be applied according to the recording condition 1 Select a profile number 2 Provide the name and select a codec 3 Specify the conditions under which the codec will be applied 4 Specify the details of the selected codec including resolution and frame rate Resolution Set the video size of the MPEG 4 H 264 and MJPEG files Framerate Specify the frame rate Compression Specify the compression rate of the video Bitrate control You can select one from constant bit rate and variable bit rate for compression Constant bit rate CBR varies the video quality and fixes network transfer bit rate while variable bit rate emphasizes the quality by varying network transfer bit rate Target bitrate Specify the bit rate at which you will transfer the video Encoding priority You can set the video transfer method to Framerate or Compression e GOP size Select a GOP size between 1 and 15 e Profile You can select the H 264 profiling method Entropy coding Reduce
27. or lead above the reference levels in EC Directive 2006 66 If batteries are not properly disposed of these substances can cause harm to human health or the environment To protect natural resources and to promote material reuse please separate batteries from other types of waste and recycle them through your local free battery return system English _7 M3IAHAAO overview CONTENTS OVERVIEW 3 Important Safety Instructions 10 Product Features 10 Recomended PC Specifications 10 Recomended SDHC SD Memory Card Specifications 11 What s Included 12 Ata Glance INSTALLATION amp 15 Inserting Removing an SD Memory Card CONNECTION 16 8 Memory Card Information Not Included 17 Connecting with other Device NETWORK CONNECTION 22 Connecting the Network Encoder Directly to Local Area Networking AND SETUP 23 Connecting the Network Encoder Directly to a DHCP Based DSL Cable Modem 24 Connecting the Network Encoder Directly to a PPPoE Modem 25 Connecting the Network Encoder to a Broadband Router with the PPPoE Cable Modem 26 Buttons used in IP Installer 27 Static IP Setup 30 Dynamic IP Setup 31 Port Range Forward Port Mapping Setup 33 Connecting to the Network Encoder from a Shared Local PC 33 Connecting to the Network Encoder from a Remote PC via the Internet 8_ overview WEB VIEWER SETUP SCREEN APPENDIX 63 69 Connecting to the Network encoder Login Installing Silverlight Runtime Using th
28. th heel to activate the digital Screen F a h TT Optimization Adjust the screen to the optimal size and display the Full Screen icon on the Live Full Screen sayan 12 Capture Saves the snapshot as an image file in the bmp format You can select a profile type in Video profiles under the Audio amp Videos setup menu 13 Video Format For IE 6 0 users press the Browse button next to the lt Video profile gt dialog and select a profile type again if the selected profi le is not played If the Invalid codec message is displayed select a profile type from the profile list again 4 m f the temperature drops below the operational range video signal may not be produced In such cases please wait for the video USING THE CAMERA MENU Used to retrieve and customize the connected Camera Setup menu 1 Launch the Web Viewer 2 Click Camera Menu E in the left corner of the Live screen The camera setup menu appears 3 Use the Up Down 4 buttons to move to a desired item 4 Click Enter Then use the up down A V button to move to a desired item 5 To access a sub menu item click Enter 6 To move to previous menu or exit the menu setup click Cancel IEJ button g The camera menu may different depend on camera For more information refer to camera s user manual English _39 YAMGIA daM web viewer To control the PTZ function You can control the c
29. the possible compression loss due to encoding e Multicast VNP Specify the use of the VNP protocol IPv4 Enter an IPv4 address with which you can connect to the Pv4 network Port Specify the video communication port TTL Set the TTL for the VNP packet e Multicast RTP Specify the use of the RTP protocol IPv4 Enter an IPv4 address with which you can connect to the Pv4 network Port Specify the video communication port TTL You can set the TTL for the RTP packet zx What is GOP size GOP Group of Pictures is a set of video frames for MPEG 4 and H 264 format compression indicating a collection of frames from the initial I Frame key frame to the next I Frame GOP consists of 2 kinds of frames I Frame and P Frame I Frame is the basic frame for the compression also known as Key Frame which contains one complete image data P Frame contains only the data that has changed from the preceding I Frame You can set between 1 and 15 for the MPEG 4 and H 264 CODEC English 45 NAAYOS dNLAS setup screen Audio setup You can configure the I O settings of the audio source from the network encoder Audio 0 can be performed only in channel 1 1 From the Setup menu select the lt Audio amp Video E gt tab 2 Click lt Audio setup gt 3 Adjust the audio I O levels to your preference e Audio In Set the audio input value e Audio Out Set the audio output value
30. those functions and data to form executables The Library below refers to any such software library or work which has been distributed under these terms A work based on the Library means either the Library or any derivative work under copyright law that is to say a work containing the Library or a portion of it either verbatim or with modifications and or translated straightforwardly into another language Hereinafter translation is included without limitation in the term modification Source code for a work means the preferred form of the work for making modifications to it For a library complete source code means all the source code for all modules it contains plus any associated interface definition files plus the scripts used to control compilation and installation of the library Activities other than copying distribution and modification are not covered by this License they are outside its scope The act of running a program using the Library is not restricted and output from such a program is covered only if its contents constitute a work based on the Library independent of the use of the Library in a tool for writing it Whether that is true depends on what the Library does and what the program that uses the Library does You may copy and distribute verbatim copies of the Library s complete source code as you receive it in any medium provided that you conspicuously
31. 3 CM3 D4 D4 S4 G R4 CM4 CH2 D2 D2 S2 G R2 CM2 14 overview Installation amp connection INSERTING REMOVING AN SD MEMORY CARD Inserting an SD Memory Card Push the SD memory card in the direction of the arrow shown in the diagram C O ta 5 9 S a o oO Do not insert the SD memory card while it s upside down by force Otherwise it may damage the SD memory card NOLLOANNOO 8 NOILVTIVLSNI Removing an SD Memory Card Gently press down on the exposed end of the memory card as shown in the diagram to eject the memory card from the slot oO Pressing too hard on the SD memory card can cause the card to shoot out uncontrollably from the slot when released To remove the SD memory card set lt Record gt to lt Off gt from lt SD records and press Apply EE page 53 f you have saved data in the SD memory card removing the SD memory card prior to setting record to OFF will cause damage to the data stored in the card f the SD memory is inserted and when record is on the SD LED indicator on the rear of the network encoder will tum on f there occurs a problem in the SD memory the SD LED indicator will blink English _15 Installation amp connection MEMORY CARD INFORMATION NOT INCLUDED What is a memory card The memory card is an external data storage device that has been developed to offer an entirely new way to record and shar
32. Activation time gt e Always Always check if an alarm occurs It activates in operated mode when the alarm occurs e Only scheduled time Check if an alarm occurs at a specified day of the week for a specified time period It activates in operated mode when the alarm occurs 5 Specify an operation that will perform if an alarm occurs e Alarm output Specify the alarm output time in the alarm input setup e E mail sending Specify the use of email transfer in the alarm input setup e Record Specify the use of recording in the alarm input setup e Goto Preset Moves to the specified preset location when setting the alarm input 6 When done click Apply RAM English 55 NAAYOS dNLAS setup Screen Motion detection You can set target detection region and motion as well as the alarm signal output 1 From the Setup menu select the lt Event E gt tab 2 Click lt Motion detection gt 3 Specify the lt Motion detection gt e Enable Sets whether to activate motion detection e Sensitivity Sets the sensitivity level of the motion detection 1 LOW 2 MEDIUM 3 HIGH 4 Set the activation time and condition e Refer to the Alarm Input for how to set the lt Activation time gt and lt Action gt page 55 5 Select whether to display the mask area You can set maximum of 4 mask areas To set mask area drag the desigred area with mouse Motion detection is activated in the mask
33. B 32GB e To ensure proper recording of video data we recommend you use a memory card that supports at least read write speed 10Mbps and Class 6 e For your network encoder we recommend you use a memory card from the following manufacturers SDHC SD Memory Card Sandisk Transcend 10_ overview WHAT S INCLUDED Please check if your network encoder and accessories are all included in the product package Appearance Item Name Quantity Description User Manual Installer SAW CD CMS SW CD Quick Guide ASSY Tapping Screw Used for installation on the wall or ceiling English _11 M3IAHAAO overview AT A GLANCE Front Side D f KENA ee NG AUDIOIN AUDIO OUT can one ov on mm og gt Vp Jrcser crs che C6 x J Item Description 1 AUDIO IN Audio input terminal which brings sound to the network encoder KJ Used to connect the microphone TD Audio output terminal which outputs sound from the network encoder 2 AO Used to connect the speaker 3 VIDEO IN CH 1 CH 4 Used to connect the BNC video input signal An Network connection A a 4 indicator CH 1 CH 4 Display the network connection status for each channel 5 Reset Button E m Audio 1 0 can be pet 12_ overview Resets the network encoder settings to the default Press and hold it for about 5 seconds to turn off the system indicator and r
34. DE THE PROGRAM ASIS WITHOUT WARRANTY OF ANY KIND EITHER OU ASSUME THE COST OF ALL ECESSARY SERVICING REPAIR OR 12 INNO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER OR ANY OTHER PARTY WHO MAY MODIFY AND OR REDISTRIBUTE DAMAGES INCLUDING ANY GENERAL SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Programs f you develop a new program and you want it to be of the greatest possible use to he public the best way to achieve this is to make it free software which everyone can redistribute and change under these terms To do so attach the following notices to he program It is safest to attach them o the start of each source file to most effectively convey the exclusion of warranty and each file should have at least the copyright line and a pointer to where the ull notice is found one line to give the program s name and an idea of what it does Copyright C yyyy n
35. E LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES END OF TERMS AND CONDITIONS wW How to Apply These Terms to Your New Libraries If you develop a new library and you want it to be of the greatest possible use to the public we recommend making it free software that everyone can redistribute and change You can do so by permitting redistribution under these terms or alternatively under the terms of the ordinary General Public License To apply these terms attach the following notices to the library It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty and each file should have at least the copyright line and a pointer to where the full notice is found one line to give the library s name and an idea of what it does Copyright C year name of author This library is free software you can redistribute it and or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation either version 2 1 of the License or at your option any later version This library is distributed in the hope that it will be useful but WITHOUT ANY WARRANTY without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE See the GNU Lesser General Public License for more details
36. Enter the IP address of the network encoder in the address bar of the browser Network Encoder See Switch HUB Network Encoder External Remote PC Firewall DDNS Server Data Center KOREA lt Local Network gt 4 Aremote PC in an external Internet out of the LAN network may not be able to connect to the network encoder installed in the intranet if the port forwarding is not properly set or a firewall is set In this case to resolve the problem contact your network administrator By factory default the IP address will be assigned from the DHCP server automatically If there is no DHCP server available the IP address will be set to 192 168 1 100 103 CH 1 CH 4 To change the IP address use the IP Installer For further details on IP Installer use refer to Static IP Setup Page 27 22_ network connection and setup CONNECTING THE NETWORK ENCODER DIRECTLY TO A DHCP BASED DSL CABLE MODEM INTERNET DSL Cable Modem External Remote PC Network Encoder DDNS Server Data Center KOREA 1 Use the cross LAN cable to connect the network cable directly to your PC 2 Run the IP Installer and change the IP address of the network encoder so that you can use the web browser on your desktop to connect to the Internet Use the Internet browser to connect to the network encoder Move to Setup page Move to Network DDNS and configure the DDNS settings Mo
37. For network encoders found with the IPv6 setting these buttons will be grayed out as the network encoders do not support this function 1 Select a network encoder in the search list Find the MAC Ethernet address labeled on the rear of the network encoder Both the Auto Set and Manual Set buttons will be activated 2 Click Auto Set maa The Auto Setting dialog appears The lt IP Address gt lt Subnet Mask gt and lt Gateway gt will be set automatically English 29 dNLAS ANY NOILOANNOS YHOML3IN network Connectio n and setup 3 Enter the password This is the login password for the admin user who accesses the network encoder The default password is 4321 4 Click OK Auto network setup will be completed 5 The network encoder will automati cally complete the network setting and restart DYNAMIC IP SETUP uto Setting r Network Information IP Address Subnet Mask Gateway FF IP Setting Password Cancel Dynamic IP Environment Setup e Example of the Dynamic IP environment Ifa Broadband Router with network encoders connected is assigned an IP ad dress by the DHCP server If connecting the network encoder directly to modem using the DHCP protocols If IPs are assigned by the internal DHCP server via the LAN Checking the Dynamic IP 1 Run the IP Installer on the user s local machine to display network encoders allocated with lt Dynamic I
38. ING OUT OF THE USE OR INABILITY TO USE THE PROGRAM INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES 17 Interpretation of Sections 15 and 16 f the disclaimer of warranty and limitation of lability provided above cannot be given local legal effect according to their terms reviewing courts shall apply local law that most closely approximates an absolute waiver of all civil ability in connection with the Program unless a warranty or assumption of liability accompanies a copy of the Program in return or a fee END OF TERMS AND CONDITIONS GNU LESSER GENERAL PUBLIC LICENSE Version 2 1 February 1999 Copyright C 1991 1999 Free Software Foundation Inc 51 Franklin Street Fifth Floor Boston MA 02110 1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document but changing it is not allowed This is the first released version of the Lesser GPL It also counts as the successor of the GNU Library Public License version 2 hence he version number 2 1 Preamble The licenses for most software are designed o take away your freedom to share and change it By contrast the GNU General Public Licenses are intended to g
39. LAN Item Description z DDNS URL address enabling access from the external Internet 7 URL However this will be replaced with the lt IP Address gt of the network i encoder if DDNS registration has failed 8 IPv4 Scans for network encoders with the IPv4 setting Aa v6 Scans for network encoders with the IPv6 setting s Activated in an IPv6 compliant environment 10 Sich Scans for network encoders that are currently connected to the network Ee However this button will be grayed out if neither IPv4 nor IPv6 is checked 11 Auto Set The IP Installer automatically configures the network settings 12 Manual Set You should configure the network settings manually 13 Exit Exits the IP Installer program g For the IP installer use only the installer version provided in the installa one if available You can download the latest version from the product website STATIC IP SETUP ion CD or use the latest Manual Network Setup Run IP Installer_vX XX exe gt to display the network encoder search list At the initial startup both Auto Set and Manual Set will be grayed out E For network encoders found with the IPv6 setting these buttons will be encoders do not support this function 1 Select a network encoder in the search list Find the MAC Ethernet address labeled on the rear of the network encoder Both the Auto Set and Manual Set buttons will be activated 2 Click Manual Set The Manual
40. P gt addresses in the list Select a network encoder in the list and click Manual Set to check the lt Dynamic IP5 of the network encoder If you uncheck lt DHCP gt you can change IP or lt Port gt to lt Static gt 30_ network connection and setup PORT RANGE FORWARD PORT MAPPING SETUP If you have installed a Broadband Router with a network encoder connected you must set the port range forwarding on the Broadband Router so that a remote PC can access the network encoder in it Manual Port Range Forwarding 1 Select lt TCP gt and lt UDP Port gt for From the Setup menu of the Broad p band Router select lt Applications amp amp Gaming Gaming gt lt Port Range Forward gt For setting the port range forward for a third party Broadband Router refer o the user guide of that Broadband Router each connected network encoder to he Broadband Router Each port number for the Broadband Router should match that specified in lt Network gt lt Port gt from the network encoder s Setup menu dNLAS ANY NOILOANNOS MHOMLAN When done click Save Settings Your settings will be saved 4 Above sample instructions are based on the CISCO s Broadband Router Model LINKSYS The settings may differ depending on the connected Broadband Router model For more information refer to the user manual of the applicable router English _31 network connection and setup
41. Setting dialog appears The default values of lt IP Address gt lt Subnet Mask gt lt Gateway gt lt HTTP Port gt and lt VNP Port gt of the network encoder will be displayed grayed out as the network English 27 network connection and setup 3 In the lt Address gt pane provide the necessary information r once MAC Ethernet Address The MAC pected hen Ethernet address of the applicable Sutnet Mak M 7 Gateway network encoder will be set auto matically so you don t need to input it manually Pasaword If using a Broadband Router e P Address Enter an address falling in the IP range provided by the Broadband Router ex 192 168 1 2 254 192 168 0 2 254 192 168 XXX 2 254 Subnet Mask The lt Subnet Mask gt of the Broadband Router will be the lt Sub net Mask gt of the network encoder e Gateway The lt Local IP Address gt of the Broadband Router will be the lt Gateway gt of the network encoder E m The settings may differ depending on the connected Broadband Router model For more information refer to the user manual of the applicable router Refer to the Port Range Forward Port Mapping Setup section of the Broadband Router s documentation Page 31 If not using a Broadband Router For setting lt IP Address lt Subnet Masks and lt Gateway gt contact your network administrator 4 In the Ports pane provide necessary information e HTTP Port Used
42. We use this license for certain libraries in order to permit linking those libraries into non free programs When a program is linked with a library whether statically or using a shared library the combination of the two is legally speaking a combined work a derivative of the original library The ordinary General Public License therefore permits such inking only if the entire combination fits its criteria of freedom The Lesser General Public License permits more lax criteria for inking other code with the library We call this license the Lesser General Public License because it does Less o protect the user s freedom than the ordinary General Public License It also provides other free software developers Less of an advantage over competing non ree programs These disadvantages are he reason we use the ordinary General Public License for many libraries However he Lesser license provides advantages in certain special circumstances For example on rare occasions there may be a special need to encourage the widest possible use of a certain library so that it becomes a de facto standard To achieve his non free programs must be allowed to use the library A more frequent case is that a free library does the same job as widely used non free libraries In this case there is little to gain by limiting the free library to free software only so we use the Lesser General Public License In other cases permissi
43. When you try to connect to the system using a tab browser the same cookie information is shared resulting in errors when connected Therefore instead of using a tab browser open a new browser window to connect to the system The network encoder connected to the network is not detected in the IP installer program e Tum off the firewall settings on your PC and then search the network encoder again Images overlap e Check whether two or more network encoders are set to a single multicast address instead of different addresses If a single address is used for multiple network encoders the images may overlap No image appears e If the transmission method is set to multicast check whether there is a router that supports multicast in the LAN the network encoder is connected to English 65 appendix PROBLEM SOLUTION Cannot record into the SD memory Check if the memory card is defective card e Check if the write protection tab of the memory card is set to Lock SD memory indicator does not e Check if the memory card is defective tum on even when the SD memory e Check if the lt Record gt is checked in lt Setup gt lt Event gt lt SD Record gt card is inserted menu e Check if the memory card is inserted in the proper direction Operation SD memory card is inserted but of memory card that is formatted by other devices is not guaranteed with the network encoder do
44. a special exception the materials to be distributed need not include anything that is normally distributed in either source or binary form with the major components compiler kernel and so on of the operating system on which the executable runs unless that component itself accompanies the executable It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not normally accompany the operating system Such a contradiction means you cannot use both them and the Library together in an executable that you distribute 7 You may place library facilities that are a work based on the Library side by side in a single library together with other library facilities not covered by this License and distribute such a combined library provided that the separate distribution of the work based on the Library and of the other library facilities is otherwise permitted and provided that you do these two things a Accompany the combined library with a copy of the same work based on the Library uncombined with any other library facilities This must be distributed under the terms of the Sections above b Give prominent notice with the combined library of the fact that part of it is a work based on the Library and explaining where to find the accompanying uncombined form of the same work 00 You may not copy modify sublicense ink with or distribute the Library excep
45. ackup settings click Restore 4 Select a backup file and click Open English _61 NAAYOS dNLAS setup screen Log You can check the system log or event log 1 From the Setup menu select the Click lt Log gt Select a log type From the right log list select an item to lt System J gt tab e Syslog You can check the system logs where any system changes are recorded including the time information e Evtlog You can check the event logs including the time information search for e f you select lt All gt in the top left dropdown list all logs for the applicable log type will be displayed If one page can not display all the logs available use the bottom buttons to move to the previous next or the last item E ff you want to view the details of a log click Info E in the right column of the log the log information will be shown in the bottom pane Each page displays 15 logs with the latest one displayed at the top m The event system log list can contain up to 1000 logs after that the existing logs will be deleted from the oldest one each time a new log is created 62_ setup screen appendix SPECIFICATION Items Description Video In 4 CVBS 1 0 Vp p 750 composite NTSC PAL Auto Detected Video Out De interlacing Filter Built in Event Trigger Motion Detection Alarm Input Video Loss Operati
46. al Public License Copyright also means copyright like laws that apply to other kinds of works such as semiconductor masks The Program refers to any copyrightable work licensed under this License Each licensee is addressed as you Licensees and recipients may be individuals or organizations To modify a work means to copy from or adapt all or part of the work in a fashion requiring copyright permission other than the making of an exact copy The resulting work is called a modified version of the earlier work or a work based on the earlier work A covered work means either the unmodified Program or a work based on the Program To propagate a work means to do anything with it that without permission would make you directly or secondarily liable for infringement under applicable copyright law except executing it on a computer or modifying a private copy Propagation includes copying distribution with or without modification making available to the public and in some countries other activities as well To convey a work means any kind of propagation that enables other parties to make or receive copies Mere interaction with a user through a computer network with no transfer of a copy is not conveying An interactive user interface displays Appropriate Legal Notices to the extent that it includes a convenient and prominently visible feature th
47. ame of author This program is free software you can redistribute it and or modify it under the terms of the GNU General Public License as published by the Free Software Foundation either version 2 of the License or at your option any later version This program is distributed in the hope that it will be useful but WITHOUT ANY WARRANTY without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE See the GNU General Public License for more details You should have received a copy of the GNU General Public License along with this program if not write to the Free Software Foundation Inc 51 Franklin Street Fifth Floor Boston MA 02110 1301 USA Also add information on how to contact you by electronic and paper mail If the program is interactive make it output a short notice like this when it starts in an interactive mode Gnomovision version 69 Copyright C year name of author Gnomovision comes with ABSOLUTELY O WARRANTY for details type show w This is free software and you are welcome o redistribute it under certain conditions ype show c for details The hypothetical commands show w and show c should show the appropriate parts of the General Public License Of course he commands you use may be called something other than show w and show c they could even be mouse clicks or menu items whatever suits your program You sho
48. and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty keep intact all the notices that refer to this License and to the absence of any warranty and distribute a copy of this License along with the Library You may charge a fee for the physical act of transferring a copy and you may at your option offer warranty protection in exchange for a fee 2 You may modify your copy or copies of the Library or any portion of it thus orming a work based on the Library and copy and distribute such modifications or work under the terms of Section 1 above provided that you also meet all of hese conditions a The modified work must itself be a software library b You must cause the files modified to carry prominent notices stating that you changed the files and the date of any change c You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this License d If a facility in the modified Library refers to a function or a table of data to be supplied by an application program that uses the facility other than as an argument passed when the facility is invoked then you must make a good faith effort to ensure that in the event an application does not supply such function or table the facility still operates and performs whatever part of its purpose remains meaningful For example a function in a library to compute square roots has a purpose t
49. arameter Reset the other settings except for the interface port DDNS IP filtering settings All Resets all settings including the network encoder settings however the log information will not be reset m f you reset the network encoder the network settings will be adjusted so that DHCP can be enabled If there is no DHCP server in the network you must run the IP Installer program to change the basic network settings such as IP address Subnet mask Gateway etc before you can connect to the network e Configuration backup amp Restore Backs up the current system settings before performing the restoration process The system is automatically restarts after backup or restoration e Restart Restarts the system 4 When done click Restart restas 60 setup screen To perform the upgrade 1 Click Upgrade 2 Click Browse and specify a file to upgrade 3 Click Send 4 The Upgrade dialog appears where the progression will be shown in the bottom Kamal upgrading waa tucceeded Appteancn usgrading was succeeded E If you forcibly terminate the upgrade process upgrade will not be completed properly To save the current settings and restore the backup settings 1 Click Backup The Save As dialog should appear 2 Specify the backup path with a proper file name and click Save The backup file will be saved to the specified path in the format of bin 3 To restore the b
50. at 1 displays an appropriate copyright notice and 2 tells the user that there is no warranty for the work except to the extent that warranties are provided that licensees may convey the work under this License and how to view a copy of this License If the interface presents a list of user commands or options such as a menu a prominent item in the list meets this criterion 1 Source Code The source code for a work means the preferred form of the work for making Modifications to it Object code means any non source form of a work A Standard Interface means an interface that either is an official standard defined by a recognized standards body or in the case of interfaces specified for a particular programming language one that is widely used among developers working in that language The System Libraries of an executable work include anything other than the work as a whole that a is included in the normal form of packaging a Major Component but which is not part of that Major Component and b serves only to enable use of the work with that Major Component or to implement a Standard Interface for which an implementation is available to the public in source code form A Major Component in this context means a major essential component kernel window system and so on of the specific operating system if any on which the executable work runs or a compiler used to produc
51. at gt to format the SD memory If your SD memory card writes slowly only one frame per second will be stored For a SD memory card with a large capacity the formatting will be slowed down accordingly f the size of data grows with time only 1 fps can be stored even if you set the record quality to Full Frame 3 Specify the record conditions e Record 1 fps forcibly Only one frame per second will be recorded regardless of he existing record profile e Overwrite If the SD memory is full this will delete old data and store new data in replacement e Pre alarm duration Specify the time point before the occurrence of the alarm starting from the time point the images will be transferred You can specify up to 5 seconds before the occurrence of the alarm Post alarm duration Specify the time point after the occurrence of the alarm to he specified time point the images will be transferred You can specify up to 120 seconds after the occurrence of the alarm 4 When done click Apply RAM 54 setup screen Alarm input You can set the alarm input type activation time and operation mode 1 From the Setup menu select the lt Event E gt tab 2 Click lt Alarm input gt 3 Specify an input device e Type Normal Open It is normally open but if it is closed an alarm will be triggered Normal Close It is normally closed but if it is open an alarm will be triggered 4 Specify the lt
52. blic License for most of our software it applies also to any other work released this way by its authors You can apply it to your programs too When we speak of free software we are referring to freedom not price Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software and charge for them if you wish that you receive source code or can get it if you want it that you can change the software or use pieces of it in new free programs and that you know you can do these things To protect your rights we need to prevent others from denying you these rights or asking you to surrender the rights Therefore you have certain responsibilities if you distribute copies of the software or if you modify it responsibilities to respect the freedom of others For example if you distribute copies of such a program whether gratis or for a fee you must pass on to the recipients the same freedoms that you received You must make sure that they too receive or can get the source code And you must show them these terms so they know their rights Developers that use the GNU GPL protect your rights with two steps 1 assert copyright on the software and 2 offer you his License giving you legal permission to copy distribute and or modify it For the developers and authors protection the GPL clearly explains that here is no warranty for this free software
53. by exercising rights under this License with respect to the covered work and you disclaim any intention to limit operation or modification of the work as a means of enforcing against the work s users your or third parties legal rights to forbid circumvention of technological measures 4 Conveying Verbatim Copies You may convey verbatim copies of the Program s source code as you receive it in any medium provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice keep intact all notices stating that this License and any non permissive terms added in accord with section 7 apply to the code keep intact all notices of the absence of any warranty and give all recipients a copy of this License along with the Program You may charge any price or no price for each copy that you convey and you may offer support or warranty protection for a fee 5 Conveying Modified Source Versions You may convey a work based on the Program or the modifications to produce it from the Program in the form of source code under the terms of section 4 provided that you also meet all of these conditions a The work must carry prominent notices stating that you modified it and giving a relevant date b The work must carry prominent notices stating that it is released under this License and any conditions added under section 7 This requirement modifies the requirement in section 4 to keep intac
54. c IP based device with the DDNS server you can easily check the changed IP when you try to access the device To add the IP address to the lt DDNS gt server visit www samsungipolis com and register your device and set the DDNS option to lt Samsung DDNS gt before providing the user ID and password for the DDNS server LOGIN The default user ID is admin and the default password is 4321 1 Enter admin in the cUser Names Enter Network Password input box mb This secme Web Ste at 192 168 1 NOD nagpunas you to kag an 2 Enter 4321 in the lt Password gt input k r E E N box If the password is changed enter the User Nano z changed password instead Buwas 3 Click OK I Save this parad in your pasawand kit If you have logged in successfully you C ea will the Live Viewer screen E For security purposes ensure that you change the password in lt System gt lt User gt The administrator ID admin is fixed and can not be changed Ifyou check the Save this password in your password list option when your input is done in future you will be logged in automatically without being prompted to enter the login information OD f you are using Internet Explorer 7 0 or 8 0 as the default web browser you can view the best quality image with a screen ratio of 10096 Reducing the ratio may cut the image on the borders English 35 YAMGIA daM web viewer This network encod
55. cise of one or more of the rights that are specifically granted under this License You may not convey a covered work if you are a party to an arrangement with a third party that is in the business of distributing software under which you make payment to the third party based on the extent of your activity of conveying the work and under which the third party grants to any of the parties who would receive the covered work from you a discriminatory patent license a in connection with copies of the covered work conveyed by you or copies made from those copies or b primarily for and in connection with specific products or compilations that contain the covered work unless you entered into that arrangement or that patent license was granted prior to 28 March 2007 Nothing in this License shall be construed as excluding or limiting any implied license or other defenses to infringement that may otherwise be available to you under applicable patent law 12 No Surrender of Others Freedom If conditions are imposed on you whether by court order agreement or otherwise that contradict the conditions of this License they do not excuse you from the conditions of this License If you cannot convey a covered work so as to satisfy simultaneously your obligations under this License and any other pertinent obligations then as a consequence you may not convey it at all For example if you agree to terms that obligate you to col
56. ctronic Equipment Applicable in the European Union and other European countries with separate collection systems This marking on the product accessories or literature indicates that the product and its electronic accessories e g charger headset USB cable should not be disposed of with other household waste at the end of their working life To prevent possible harm to the environment or Human health from uncontrolled waste disposal please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources Household users should contact either the retailer where they purchased this product or their local government office for details of where and how they can take these items for environmentally safe recycling Business users should contact their supplier and check the terms and conditions of the purchase contract This product and its electronic accessories should not be mixed with other commercial wastes for disposal k r X Correct disposal of batteries in this product Co Applicable in the European Union and other European countries with separate battery retum systems This marking on the battery manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life Where marked the chemical symbols Hg Cd or Pb indicate that the battery contains mercury cadmium
57. ditions and the following disclaimer in the documentation and or other materials provided with the distribution Neither the name of the incremental nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS Al TERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE RISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE Copyright c 1998 2001 University College London All rights reserved Redistribution and use in source and binary forms with or without modification is permitted provided that the following conditions are met and the NI and the distribut 3 All advertising mat ledgemen Department at Universi acknow 4 Neither products THIS SOFTWARE IS
58. e GNU General Public License you may choose any version ever published by the Free Software Foundation If the Program specifies that a proxy can decide which future versions of the GNU General Public License can be used that proxy s public statement of acceptance of a version permanently authorizes you to choose that version for the Program Later license versions may give you additional or different permissions However no additional obligations are imposed on any author or copyright holder as a result of your choosing to follow a later version 15 Disclaimer of Warranty THERE IS NO WARRANTY FOR THE PROGRAM TO THE EXTENT PERMITTED BY APPLICABLE LAW EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND OR OTHER PARTIES PROVIDE THE PROGRAM AS IS WITHOUT WARRANTY OF ANY KIND EITHER EXPRESSED OR IMPLIED INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU SHOULD THE PROGRAM PROVE DEFECTIVE YOU ASSUME THE COST OF ALL NECESSARY SERVICING REPAIR OR CORRECTION 16 Limitation of Liability IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER OR ANY OTHER PARTY WHO MODIFIES AND OR CONVEYS THE PROGRAM AS PERMITTED ABOVE BE LIABLE TO YOU FOR DAMAGES INCLUDING ANY GENERAL SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES ARIS
59. e Live Screen Using the Camera Menu Playback Playing the Backup Recordings Setup Audio amp Video Setup Network Setup Event Setup System Setup Specification Troubleshooting Open Source Announcement GPL LGPL Software License English 9 M3IAHAAO Overview PRODUCT FEATURES Multi Streaming This network camera can display videos in different resolutions and qualities simultaneously using different CODECs NG However MPEG 4 video can not be played on a web page Use CMS software if you want to play the video on a web page Support various communication protocols Web Browser based Monitoring Using the Internet web browser to display the image in a local network environment e Alarm If an event occurs the event related video will be transferred to the Email specified by the user or saved to the SD memory or the event signal will be sent to the Alarm Out port ONVIF Spec 1 01 Compliance This product supports ONVIF Core Spec 1 01 O RAVIF For more information refer to www onvif org Driving network video through global standardization RECOMENDED PC SPECIFICATIONS e CPU Intel R Core TM 2 2 00 GHz or higher e Operating System Windows XP VISTA 7 Mac OS e Resolution 1280X1024 pixels or higher e RAM 1GB or higher e Web Browser Internet Explorer 6 0 or higher Firefox Google Chrome Safari e Video Memory 128MB or higher RECOMENDED SDHC SD MEMORY CARD SPECIFICATIONS e 2G
60. e licensors and authors All other non permissive additional terms are considered further restrictions within he meaning of section 10 If the Program as you received it or any part of it contains anotice stating that it is governed by this License along with a term that is a further restriction you may remove that term If a icense document contains a further restriction but permits relicensing or conveying under his License you may add to a covered work material governed by the terms of that icense document provided that the further restriction does not survive such relicensing or conveying f you add terms to a covered work in accord with this section you must place in the relevant source files a statement of the additional terms that apply to those files or a notice indicating where to find the applicable terms Additional terms permissive or non permissive may be stated in the form of a separately written license or stated as exceptions the above requirements apply either way 8 Termination You may not propagate or modify a covered work except as expressly provided under this License Any attempt otherwise to propagate or modify it is void and will automatically terminate your rights under this License including any patent licenses granted under the third paragraph of section 11 However if you cease all violation of this License then your license from a particular copyright
61. e the work or an object code interpreter used to run it The Corresponding Source for a worl in object code form means all the source code needed to generate install and for an executable work run the object code and to modify the work including scripts to control those activities However it does not include the work s System Libraries or general purpose tools or generally available free programs which are used unmodified in performing those activities but which are not part of the work For example Corresponding Source includes interface definition files associated with source files for the work and the source code for shared libraries and dynamically linked subprograms that the work is specifically designed to require such as by intimate data communication or control flow between those subprograms and other parts of the work The Corresponding Source need not include anything that users can regenerate automatically from other parts of the Corresponding Source The Corresponding Source for a work in source code form is that same work 2 Basic Permissions All rights granted under this License are granted for the term of copyright on the Program and are irrevocable provided the stated conditions are met This License explicitly affirms your unlimited permission to run the unmodified Program The output from running a covered work is covered by this License only if the output given its content
62. e video audio and text data using digital devices Selecting a memory card that s suitable for you Your network encoder supports SDHC memory cards You may however experience compatibility issues depending on the model and make of the memory card For your network encoder we recommend you use a memory card from the following manufacturers SDHC SD Memory Card Sandisk Transcend Playback performance can be affected depending on the speed of memory card so use the high speed memory card Memory Card Use SD and SDHC memory cards feature a switch that disables writing data on to the media Having this switch to the Lock position will prevent accidental deletion of data stored in the memory card but at the same time will also prevent you from writing data on to the media Memory Card Components Contacts p Lock Switch SD SDHC 16_ installation amp connection CONNECTING WITH OTHER DEVICE Camera Camera Connecting the camera Connect the VIDEO IN port of the network encoder to the video output port of the camera English _17 NOLLOANNOO 8 NOILVTIVLSNI Installation amp connection eT EEEE Eso camo cai Ethernet Power Ethernet Connection Connect the Ethernet cable to the local network or to the Internet Power Supply Use the screwdriver to connect each line of the power cable to the corresponding power port of the network encoder oO Be careful no
63. ence including the GNU Public Licence en use P iy si www use ip co uk 01304 827609 SALES NETWORK SAMSUNG TECHWIN CO LTD Samsungtechwin R amp D Center 701 Sampyeong dong Bundang gu Seongnam si Gyeonggi do Korea 463 400 TEL 82 70 7147 8740 60 FAX 82 31 8018 3745 SAMSUNG TECHWIN AMERICA Inc SAMSUNG TECHWIN EUROPE LTD 1480 Charles Willard St Carson CA 90746 UNITED STATES Samsung House 1000 Hillswood Drive Hillswood Business Tol Free 1 877 213 1222 FAX 1 310 632 2195 Park Chertsey Surrey UNITED KINGDOM KT16 OPS Www samsungcctvusa com TEL 44 1932 45 5300 FAX 44 1932 45 5325 www samsungtechwin com www samsungsecurity com www samsungipolis com
64. er can modify the Library and then relink to produce a modified executable containing the modified Library It is understood that the user who changes the contents of definitions files in the Library will not necessarily be able to recompile the application to use the modified definitions o Use a suitable shared library mechanism for linking with the Library A suitable mechanism is one that 1 uses at run time a copy of the library ready present on the user s computer ystem rather than copying library functions into the executable and 2 will operate properly with a modified version of the library if the user installs one as long as the modified version is interface compatible with the version that the work was made with O o c Accompany the work with a written offer Valid for at least three years to give the same user the materials specified in Subsection 6a above for a charge no more than the cost of performing this distribution d If distribution of the work is made by offering access to copy from a designated place offer equivalent access to copy the above specified materials from the same place e Verify that the user has already received a copy of these materials or that you have already sent this user a copy For an executable the required form of the work that uses the Library must include any data and utility programs needed for reproducing the executable from it However as
65. er code with the library you must provide complete object files to the recipients so that they can relink them with the library after making changes to the library and recompiling it And you must show them these terms so they know their rights We protect your rights with a two step method 1 we copyright the library and 2 we offer you this license which gives you legal permission to copy distribute and or modify the library To protect each distributor we want to make it very clear that there is no warranty or the free library Also if the library is modified by someone else and passed on the recipients should know that what hey have is not the original version so hat the original author s reputation will not be affected by problems that might be introduced by others Finally software patents pose a constant hreat to the existence of any free program We wish to make sure that a company cannot effectively restrict the users of a ree program by obtaining a restrictive icense from a patent holder Therefore we insist that any patent license obtained for a version of the library must be consistent with the full freedom of use specified in this icense Most GNU software including some ibraries is covered by the ordinary GNU General Public License This license the GNU Lesser General Public License applies to certain designated libraries and is quite different from the ordinary General Public License
66. er uses Microsoft Silverlight for displaying the video INSTALLING SILVERLIGHT RUNTIME If your PC has not installed Silverlight Runtime or has just installed an old runtime version you will be redirected to the Silverlight Runtime installation page automatically when accessing the web viewer 1 Click lt Click Here gt apr hanm aat 2 When the file download dialog pops up click lt Run gt File Download Security Warning Do you want to run ot save this fde im Nome Siveright Developer exe Type Application 7 63 MB From 192 168 1 100 Con J see oes 0 basahang tatandaan kal tdanyrepbrdpet aad your COMPLAD AEI Baa do nak kaa sara iha romare ala eh 3 When the download is completed click Fater met Explores lt Security Warning lt Run gt Do you mani to run this software a At cer Microsoft Corporation EJ revo seers ada Fes fon a barat con be uel NA NG kpa Gin ren dts cager Coy run software feces pales you trit War s the rh 4 The Silverlight Runtime installation page will be displayed lt Install now gt to negra Silverlight 4 proceed with the installation NG NG Gg Bal yu sin te Sew yo ne ete Silverlight 36_ web viewer 5 When done click lt Close gt Installation successful wy System components that ae required for automatc updates are Silverlight wane 6 Close and restart the web browser and try to access the Web Viewer When Silverlight Runtime is proper
67. es not this network encoder unit operate properly e Format the memory card again in lt Setup gt gt lt Event gt gt lt SD Record gt menu Cannot format the SD memory e Check if the write protection tab of the memory card is set to Lock card 66_ appendix OPEN SOURCE ANNOUNCEMENT Some software components of this product incorporate source code covered under the BSD license as follows Component Name License License URL lighttpd 1 4 25 BSD 2 0 http www opensource org licenses bsd license htm librtp 1 20 BSD 1 0 lighttpd is a secure fast compliant and very flexible web server that has been optimized for high performance environments It has a very low memory footprint compared to other webservers and takes care of cpu load Its advanced feature set FastCGI CGI Auth Output Compression URL Rewriting and many more make lighttpd the perfect webserver software for every server that suffers load problems For more additional information send email to help cctv samsung com Copyright C 2004 Kneschke incremental All rights reserved Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer Redistributions in binary form must reproduce the above copyright notice this list of con
68. estart the system E If you reset the network encoder the network settings will be adjusted so that DHCP can be enabled If there is no DHCP server in the network you must run the IP Installer program to change the basic network settings such as IP address Subnet mask Gateway etc before you can connect to the network For more information on IP settings refer to Network Setup page 47 ormed only in channel 1 Rear Side Item Description 1 Network Port Used to connect a LAN cable D 1 4 RS 485 Data Line D 1 4 RS 485 Data Line S1 54 Alarm In 2 vo Port G GND R1 R4 Alarm Relay Output CM1 CM4 Alarm Out Common SD Memory Card Compartment Compartment for the SD memory card English 13 M3IAHAAO overview Item Description ON A memory card is inserted and operates normally Flashing Failed to record insufficient space or inserted Sp abnormally Power OFF Network encoder is off network encoder is SD Indicators restarting or memory card is not in place When record is off ON While the power is on OFF If the power is off POWER 5 Power Port Used to connect the specified power source 6 GND Used for earth grounding Z The SD memory can be performed only in channel 1 Channel I O port table RS 485 SENSOR RELAY OUT RS 485 SENSOR RELAY OUT CH1 D1 D1 S1 G R1 CM1 D3 D3 S3 G R
69. f its contents constitute a work based on the Program independent of having been made by running the Program Whether that is true depends on what the Program does para You may copy and distribute verbatim copies of the Program s source code as you receive it in any medium provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty keep intact all the notices that refer to this License and to the absence of any warranty and give any other recipients of the Program a copy of this License along with the Program You may charge a fee for the physical act of transferring a copy and you may at your option offer warranty protection in exchange for a fee You may modify your copy or copies of the Program or any portion of it thus forming a work based on the Program and copy and distribute such modifications or work under the terms of Section 1 above provided that you also meet all of these conditions a You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change b You must cause any work that you distribute or publish that in whole or in part contains or is derived from the Program or any part thereof to be licensed as a whole at no charge to all third parties under the terms of this License c If the modified program normally reads commands interactively when run you
70. ftware we are referring to freedom not price Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software and charge for this service if you wish that you receive source code or can get it if you want it that you can change the software or use pieces of it in new free programs and that you know you can do these things To protect your rights we need to make restrictions that forbid anyone to deny you hese rights or to ask you to surrender the rights These restrictions translate to certain responsibilities for you if you distribute copies of the software or if you modify it For example if you distribute copies of such a program whether gratis or for a fee you must give the recipients all the rights hat you have You must make sure that they too receive or can get the source code And you must show hem these terms so they know their rights We protect your rights with two steps 1 copyright the software and 2 offer you this license which gives you legal permission to copy distribute and or modify the software Also for each author s protection and ours we want to make certain that everyone understands that there is no warranty for this free software If the software is modified by someone else and passed on we want its recipients to know that what they have is not the original so that any problems introduced by others will not reflect on the
71. gt as necessary e P type Select an IP connection type Manual Specify the IP address Subnet Mask Gateway DNS1 and DNS2 DHCP Specify the DNS1 and DNS2 PPPoE Specify the DNS1 DNS2 ID and password If you set it to lt Manual gt you should specify the IP Subnet mask Gateway DNS 1 amp 2 manually MAC address Shows the MAC address e P address Displays the current IP address e Subnet mask Displays the lt Subnet Masks for the set IP e Gateway Displays the lt Gateway gt for the set IP e DNS1 DNS2 Displays the DNS Domain Name Service server address English 47 setup Screen e Pv6 use Specify the use of IPv6 e Mode If you select lt IPv6 uses the mode is enabled e Pv6 address Obtains the IPv6 address to access the IPv6 network 4 When done click Apply ZAM D The IP address allocation will be restored to the default DHCP At the moment if it fails to detect a DHCP server within 1 minute the address will be reverted to the previous setting automatically Port 1 From the Setup menu select the lt Network Gf gt tab 2 Click lt Port gt 3 Type in each item in the Port menu as necessary Neither the port range between 0 and 1023 nor port 3702 is available HTTP port HTTP port used to access the network encoder via the web browser The default is 80 TCP VNP port Set a port used to transfer video signals with the Samsung p
72. hat is entirely well defined independent of the application Therefore Subsection 2d requires that any application supplied function or table used by this function must be optional if the application does not supply it the square root function must still compute square roots These requirements apply to the modified work as a whole If identifiable sections of that work are not derived from the Library and can be reasonably considered independent and separate works in themselves then this License and its terms do not apply to those sections when you distribute them as separate works But when you distribute the same sections as part of a whole which is a work based on the Library the distribution of the whole must be on the terms of this License whose permissions for other licensees extend to the entire whole and thus to each and every part regardless of who wrote it Thus it is not the intent of this section to claim rights or contest your rights to work written entirely by you rather the intent is to exercise the right to control the distribution of derivative or collective works based on the Library In addition mere aggregation of another work not based on the Library with the Library or with a work based on the Library on a volume of a storage or distribution medium does not bring the other work under the scope of this License 3 You may opt to apply the terms of the ordinary GNU Gene
73. holder is reinstated a provisionally unless and until the copyright holder explicitly and finally terminates your license and b permanently if the copyright holder fails to notify you of the violation by some reasonable means prior to 60 days after the cessation Moreover your license from a particular copyright holder is reinstated permanently if the copyright holder notifies you of the violation by some reasonable means this is the first time you have received notice of violation of this License for any work from that copyright holder and you cure the violation prior to 30 days after your receipt of the notice Termination of your rights under this section does not terminate the licenses of parties who have received copies or rights from you under this License If your rights have been terminated and not permanently reinstated you do not qualify to receive new licenses for the same material under section 10 9 Acceptance Not Required for Having Copies You are not required to accept this License in order to receive or run a copy of the Program Ancillary propagation of a covered work occurring solely as a consequence of using peer to peer transmission to receive a copy likewise does not require acceptance However nothing other than this License grants you permission to propagate or modify any covered work These actions infringe copyright if you do not accept this License Therefore by modifying or propagating a
74. lation amp connection Connecting to the I O port box Connect the Alarm I O signal to the corresponding port of the rear port box e 4 Z 5 o Z EE D2 D2 D3 D3 D4 T a 1 S2 S3 S4 Ci ji CM1 R2 CM2 R3 CM3 R4 oe go RS 485 SENSOR RELAY OUT 8 5 m Q o zZ Port Description Port Description D 1 4 RS 485 Data Line R1 R4 Alarm Relay Output D 1 4 RS 485 Data Line CM1 CM4 Alarm Out Common S1 S4 Alarm In G GND Connecting to the RS 485 device Connect the external device to the RS 485 D D ports You can connect and control PTZ camera that supports RS 485 communication Depending on camera s type connection polarity can be different For further information refer to the corresponding PTZ Camera s documentation Connecting to the Alarm Input Connect one signal cable out of 2 of applicable sensor to the S1 port and the other to the G port Connecting the Alarm Output Connect one signal cable out of 2 of applicable external device to the RELAY OUT and the other to the CM port E You must use the specific RS 485 alarm 1 0 ports for each channel English _21 network connection and setup You can set up the network settings according to your network configurations CONNECTING THE NETWORK ENCODER DIRECTLY TO LOCAL AREA NETWORKING Connecting to the network encoder from a local PC in the LAN 1 Launch an Internet browser on the local PC 2
75. lect a royalty for further conveying from those to whom you convey the Program the only way you could satisfy both those terms and this License would be to refrain entirely from conveying the Program 13 Use with the GNU Affero General Public License Notwithstanding any other provision of this License you have permission to link or combine any covered work with a work licensed under version 3 of the GNU Affero General Public License into a single combined work and to convey the resulting work The terms of this License will continue to apply to the part which is the covered work but the special requirements of the GNU Affero General Public License section 13 concerning interaction through a network will apply to the combination as such 14 Revised Versions of this License The Free Software Foundation may publish revised and or new versions of the GNU General Public License from time to time Such new versions will be similar in spirit to the present version but may differ in detail to address new problems or concerns Each version is given a distinguishing version number If the Program specifies that a certain numbered version of the GNU General Public License or any later version applies to it you have the option of following the terms and conditions either of that numbered version or of any later version published by the Free Software Foundation If the Program does not specify a version number of th
76. led 5 When done click Apply RAM Installing the certificate 1 Enter the certificate name 2 Select the certificate file to be installed and certificate key and click Install insta __ button Deleting the certificate 1 Click Delete 5557 button EVENT SETUP FTP E mail You can configure the FTP E mail server settings so that you can transfer the images stored in the network encoder to your PC if an event occurs 1 From the Setup menu select the lt Event E gt tab 2 Click lt FTP E mail gt 3 Select lt FTP configuration gt or lt E mail configuration gt and enter select a desired value e FTP configuration Server address Enter the IP address of the FTP server that you transfer the alarm images to User ID Enter the user ID with which you will log in to the FTP server Password Enter the user account password for logging into the FTP server t 52_ setup screen Upload directory Specify the FTP path where you will transfer the alarm images Port The default port of the FTP server is 21 however you can use a different port number according to the FTP server settings Passive mode Select lt On gt if you need to connect in passive mode due to the firewall or the FTP server settings e E mail configuration Server address Enter the IP address of the email server that you use for the email transfer ex SMTP hotmail com
77. ly button IP filtering You can create a list of IPs that you want to grant or deny access to them q a f i 1 From the Setup menu select the lt Network E gt tab 2 Click lt IP filtering gt 3 Select a lt Filtering type gt e Deny If selecting this access from those IPs that are added to the filtering will be restricted e Allow If selecting this access from only those IPs that are added to the filtering will be accepted 4 Provide the IP that you want to grant or deny access from 5 When done click Apply BEZH SSL You can select a secure connection system or install the public certificate for this purpose 1 From the Setup menu select the Network E gt tab 2 Click lt SSL gt 3 Select a secure connection system To access the network encoder using HTTPS mode you have to type the IP address for the network encoder in the form of https lt Network encoder_ P gt English _51 NAAYOS dNLAS setup Screen 4 Search for the public certificate that you want to install on the network encoder To install the certificate on the network encoder you need to provide a certificate name it can be arbitrarily assigned by the user certificate file issued from the certifi cation authority and a key file The lt HTTPS Secure connection mode using the public certificate gt item will be active only if there exists a public certificate instal
78. ly installed you will see the Live screen oO For normal installation set the Block Popup setting as follows Internet Explorer Tools Block Popup Always allow popups from the current site A However MAC OS X users who are not connected to the Internet can use the provided installation CD to install Silverlight Runtime Run the executable Silverlight xxx dmg in the CD You will be guided through installation of the software English _37 YAMGIA daM web viewer USING THE LIVE SCREEN SAMSUNG POLIS ore s Item Description 1 Monitoring Move to the monitoring screen 2 Playback Switch to the monitoring screen that plays recording data in the SD memory E Setup Move to the Setup screen 4 Viewer Screen Displays the Live video on the screen 5 Alarm Output Activate the Alarm Out port 6 Audio Display the audio Listen and Talk toggle button on the screen Only CH 1 activated FA te ae Hides the alarm indicator near the border of the viewer screen 8 Camera Menu Used to retrieve and customize connected camera s Setup menu For selecting and saving each menu item refer to Using the Camera Menu page 39 38_ web viewer Item Description 9 PTZ You can control Pan Tilt Zoom of the cameras that are connected to the network encoder 10 igi ou can use the mouse wheel to activate the digital zooming 10 Digital PTZ Y
79. modules it contains plus any associated interface definition files plus the scripts used to control compilation and installation of the executable However as a special exception the source code distributed need not include anything that is normally distributed in either source or binary form with the major components compiler kernel and so on of the operating system on which the executable runs unless that component itself accompanies the executable If distribution of executable or object code is made by offering access to copy from a designated place then offering equivalent access to copy the source code from the same place counts as distribution of the source code even though third parties are not compelled to copy the source along with the object code 4 You may not copy modify sublicense or distribute the Program except as expressly provided under this License Any attempt otherwise to copy modify sublicense or distribute the Program is void and will automatically terminate your rights under this License However parties who have received copies or rights from you under this License will not have their licenses erminated so long as such parties remain in full compliance You are not required to accept this License since you have not signed it However nothing else grants you permission to modify or distribute the Program or its derivative works These actions are prohibited by law if you do not
80. must cause it when started running for such interactive use in the most ordinary way to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty or else saying that you provide a warranty and that users may redistribute the program under these conditions and telling the user how to view a copy of this License Exception if the Program itself is interactive but does not normally print such an announcement your work based on the Program is not required to print an announcement These requirements apply to the modified work as a whole If identifiable sections of that work are not derived from the Program and can be reasonably considered independent and separate works in themselves then this License and its terms do not apply to those sections when you distribute them as separate works But when you distribute the same sections as part of a whole which is a work based on the Program the distribution of the whole must be on the terms of this License whose permissions for other licensees extend to the entire whole and thus to each and every part regardless of who wrote it Thus it is not the intent of this section to claim rights or contest your rights to work written entirely by you rather the intent is to exercise the right to control the distribution of derivative or collective works based on the Program In addition mere aggregation of another work n
81. nchronize the time with the connected PC 4 When done click Apply RZ E lf you select the lt Synchronize with PC viewers the standard timezone should be set the same as the current timezone in PC The time setting for each of 4 channels should be specified separately If you want to perform the time sync select NTP or PC Sync User 1 From the Setup menu select the lt System E tab 2 Click lt User gt 3 Provide the necessary user information e Administrator Password Change Change the current password for the administrator Guest setup If cGuest access is permitted any guest can access the Web Viewer screen but can view only the Live viewer screen level for a user who is set to lt Enable gt Video You can select a video profile in the Liver viewer screen Current users You can change the user information and adjust the permission Audio In The audio input option will be activated in the Live Viewer screen Controls You can control the network encoder menu PTZ audio output and Alarm buttons 4 When done click Apply EEZ English _59 NAAYOS dNLAS setup Screen Upgrade Reboot 1 From the Setup menu select the lt System E gt tab 2 Click lt Upgrade Reboot gt 3 Select a desired item and set it appropriately e Upgrade Performs upgrading the system e Factory default Resets the system to the factory default Except network p
82. ng Source under the terms of this License in one of these ways a Convey the object code in or embodied in a physical product including a physical distribution medium accompanied by the Corresponding Source fixed on a durable physical medium customarily used for software interchange b Convey the object code in or embodied in a physical product including a physical distribution medium accompanied by a written offer valid for at least three years and valid for as long as you offer spare parts or customer support for that product model to give anyone who possesses the object code either 1 a copy of the Corresponding Source for all the software in the product that is covered by this License on a durable physical medium customarily used for software interchange for a price no more than your reasonable cost of physically performing this conveying of source or 2 access to copy the Corresponding Source from a network server at no charge c Convey individual copies of the object code with a copy of the written offer to provide the corresponding Source This alternative is allowed only occasionally and noncommercially and only if you received he object code with such an offer in accord with subsection 6b Convey the object code by offering access rom a designated place gratis or for a charge and offer equivalent access to he Corresponding Source in the same way through the same place at no further charge
83. object code 5 A program that contains no derivative of any portion of the Library but is designed to work with the Library by being compiled or linked with it is called a work that uses the Library Such a work in isolation is not a derivative work of the Library and therefore falls outside the scope of this License However linking a work that uses the Library with the Library creates an executable that is a derivative of the Library because it contains portions of the Library rather than a work that uses the library The executable is therefore covered by this License Section 6 states terms for distribution of such executables When a work that uses the Library uses material from a header file that is part of the Library the object code for the work may be a derivative work of the Library even hough the source code is not Whether this is true is especially significant if the work can be linked without the Library or if the work is itself a library The threshold for this o be true is not precisely defined by law f such an object file uses only numerical parameters data structure layouts and accessors and small macros and small inline functions ten lines or less in length then the use of the object file is unrestricted regardless of whether it is legally a derivative work Executables containing this object code plus portions of he Library will still fall under Section 6 O
84. of this License o The Free Software Foundation may publish revised and or new versions of the General Public License from time to time Such new versions will be similar in spirit to the present version but may differ in detail to address new problems or concerns Each version is given a distinguishing version number If the Program specifies aversion number of this License which applies to it and any later version you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation If the Program does not specify aversion number of this License you may choose any version ever published by the Free Software Foundation 10 If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different write to the author to ask or permission For software which is copyrighted by the Free Software Foundation write to the Free Software Foundation we sometimes make exceptions for this Our decision will be guided by the two goals of preserving he free status of all derivatives of our ree software and of promoting the sharing and reuse of software generally NO WARRANTY 11 BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE THERE IS NO WARRANTY FOR THE PROGRAM TO THE EXTENT PERMITTED BY APPLICABLE LAW EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND OR OTHER PARTIES PROVI
85. om any part of it Additional permissions may be written to require their own removal in certain cases when you modify the work You may place additional permissions on material added by you to a covered work for which you have or can give appropriate copyright permission lotwithstanding any other provision of this License for material you add to a covered work you may if authorized by the copyright holders of that material supplement the terms of this License with terms a Disclaiming warranty or limiting liability differently from the terms of sections 15 and 16 of this License or b Requiring preservation of specified reasonable legal notices or author attributions in that material or in the Appropriate Legal Notices displayed by works containing it or c Prohibiting misrepresentation of the origin of that material or requiring that modified versions of such material be marked in reasonable ways as different from the original version or d Limiting the use for publicity purposes of names of licensors or authors of the material or e Declining to grant rights under trademark law for use of some trade names trademarks or service marks or f Requiring indemnification of licensors and authors of that material by anyone who conveys the material or modified versions of it with contractual assumptions of liability to the recipient for any liability that these contractual assumptions directly impose on thos
86. on An apparatus with CLASS I construction shall be connected to a MAINS socket outlet with a protective earthing connection Battery Batteries battery pack or batteries installed shall not be exposed to excessive heat such as sunshine fire or the like It is essential that when changing the battery in the unit the replacement battery must be of the same type otherwise there may be a possibility of an explosion CALIFORNIA USA ONLY This Perchlorate warning applies only to primary CR Manganese Dioxide Lithium coin cells in the product sold or distributed ONLY in California USA Perchlorate Material special handling may apply See www dtsc ca gov hazardouswaste perchlorate CAUTION These servicing instructions are for use by qualified service personnel only To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so Please use the input power with just one camera and other devices must not be connected English 5 M3IAHAAO overview Please read the following recommend safety precautions carefully Do not Place this apparatus on an uneven surface Do not install on a surface where it is exposed to direct sunlight near heating equipment or heaw cold area A Ng Do not attempt to service this apparatus yourself User s Manual is a guidance book how to use the products
87. on to use a particular library in non free programs enables a greater number of people to use a large body of free software For example permission to use the GNU C Library in non free programs enables many more people to use the whole GNU operating system as well as its variant the GNU Linux operating system Although the Lesser General Public License is Less protective of the users freedom it does ensure that the user of a program that is linked with the Library has the freedom and the wherewithal to run that program using a modified version of the Library The precise terms and conditions for copying distribution and modification follow Pay close attention to the difference between a work based on the library and a work that uses the library The former contains code derived from the library whereas the latter must be combined with the library in order to run TERMS AND CONDITIONS FOR COPYING DISTRIBUTION AND MODIFICATION 0 This License Agreement applies to any software library or other program which contains a notice placed by the copyright holder or other authorized party saying it may be distributed under the terms of this Lesser General Public License also called this License Each licensee is addressed as you A library means a collection of software functions and or data prepared so as to be conveniently linked with application programs which use some of
88. onal Alarm 1 0 Input 4ea Output 4ea Relay Remote Control interface RS 485 Port x4 Half Duplex RS 485 Protocol SAMSUNG T E PELCO P D Ethernet RJ 45 10 100 1000BASE T Video Compression 764 MPEG 4 MJPEG Format NTSC 704x480 640x480 352x240 320x240 Resolution PAL 704x576 640x480 352x288 320x240 Max Framerate NTSC 30fps Per channel PAL 25fps Per channel Video Quality H 264 MPEG 4 Compression Level Target Bitrate Level Control Adjustment MJPEG Quality Level Control Network Bitrate Control Method H 264 MPEG 4 CBR or VBR MJPEG VBR Streaming Capability Multiple Streaming Up to 10 Profiles Audio 1 0 Line 1 0 port x1 only channel 1 supported Audio Compression 6711 wlaw Format Audio Communication 2 Way IP IPv4 IPv6 English 63 XIGNAddV APPE ndix Items Description TCP IP UDP P RTP UDP RTP TCP RTSP NTP HTTP HTTPS SSL Protocol DHCP PPPoE FTP SMTP ICMP IGMP SNMPv1 v2c v3 MIB 2 ARP DNS DDNS ONVIF HTTPS SSL Login Authentication Security Digest Login Authentication IP Address Filtering User access Log Streaming Method Unicast Multicast Network Max User Access 10 users at Unicast Mode Memory Slot SD SDHC Memory Slot only channel 1 supported ONVIF Conformance Yes Supported OS Windows XP VISTA 7 MAC OS Web Viewer Supported Browser Internet Explorer 6 0 or Higher
89. onditions are imposed on you whether by court order agreement or otherwise that contradict the conditions of this License they do not excuse you from the conditions of this License If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations then as a consequence you may not distribute the Library at all For example if a patent license would not permit royalty free redistribution of the Library by all those who receive copies directly or indirectly through you then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Library If any portion of this section is held invalid or unenforceable under any particular circumstance the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims this section has the sole purpose of protecting the integrity of the free software distribution system which is implemented by public license practices Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system it is up to the author donor to decide if he or she is willing to distribute software through an
90. onnected camera that supports the PTZ functions if it is connected to the network encoder f the PTZ function is not controllable check the RS 485 connection status of the camera and network encoder Page 21 Press the PTZ E button When the PTZ button bar appears on the screen use the direction buttons to adjust the camera angle zoom factor or focus to your preference N To capture the snapshot 1 Click Jj on the scene to capture The Capture dialog should appear 2 Click Save button The screenshot will be saved in the specified path g f you are using the IE8 as the default web browser select Tools Internet Options Security and uncheck Use protected mode 40_ web viewer To toggle the audio sound 1 Click the Audio IR button The corresponding button will be displayed in the Viewer 2 Click the button to listen to mute the sound as you wish This button operates as a toggle button To toggle the microphone sound 1 Click the Mic button The corresponding button will be displayed in the Viewer OD Cannot find audio recording device message appears if there is no Microphone 2 Click the button to start stop talking This button operates as a toggle button The Silverlight permission dialog appears when you click the microphone button To fit the full screen 1 Click the Full Screen B button The corresponding button will be
91. ons are incompatible with these write to the author to ask or permission For software which is copyrighted by the Free Software Foundation write to the Free Software Foundation we sometimes make exceptions for this Our decision will be guided by the two goals of preserving he free status of all derivatives of our ree software and of promoting the sharing and reuse of software generally NO WARRANTY 15 BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE THERE IS NO WARRANTY FOR THE LIBRARY TO THE EXTENT PERMITTED BY APPLICABLE LAW EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND Je m o gt E 5 O O m pu T O po lt gt O m LEI pt I m E 3 bu lt D lt 2 I O T O m wo pu gt bu lt O D O lt m on gt BES O DAM Q m lt O BGE mI 0x6 Ane 052 Hom 4 I m Q O a 4 16 O EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO WRITING WILL ANY COPYRIGHT HOLDER OR ANY OTHER PARTY WHO MAY MODIFY AND OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE BE LIABLE TO YOU FOR DAMAGES INCLUDING ANY GENERAL SPECIAL NCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE LIBRARY INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF TH
92. ormation 1 2 3 Check the network encoder information 4 From the Setup menu select the lt System E gt tab Click lt Product information gt or provide details according to your network environment e Location Specify the location where the network encoder is installed e Description Provide detailed information about the network encoder location e Memo Provide an explanation about the network encoder for better understanding e Language Select a preferred language for the network encoder menus and the Web Viewer OSD When done click Apply l oO Product related information only allows English for input Date amp Time 1 2 3 From the Setup menu select the lt System E gt tab Click lt Date amp Time gt Specify the time and date that will be applied to the network encoder e Current system time Displays the current time settings of your system e Timezone Specify the local time zone based on the GMT e Use daylight saving time If checked the time will be set one hour before the local time zone for the specified time period This option will be displayed only in areas where DST is applied 58 setup screen e System time setup Specify the time and date that will be applied to your system Manual Specify the time manually Synchronize with NTP server Sync with the time of the specified server address Synchronize with PC viewer Sy
93. ot based on the Program with the Program or with a work based on the Program on a volume of a storage or distribution medium does not bring the other work under the scope of this License 3 You may copy and distribute the Program or a work based on it under Section 2 in object code or executable form under the terms of Sections 1 and 2 above provided that you also do one of the following a Accompany it with the complete corresponding machine readable source code which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange or b Accompany it with a written offer valid for at least three years to give any third party for a charge no more than your cost of physically performing source distribution a complete machinereadable copy of the corresponding source code to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange or c Accompany it with the information you received as to the offer to distribute corresponding source code This alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable form with such an offer in accord with Subsection b above The source code for a work means the preferred form of the work for making modifications to it For an executable work complete source code means all the source code for all
94. owser and type the DDNS URL address of the network encoder or the IP address of the Broadband Router in the address bar ex http www samsungipolis com Product ID English 33 web viewer CONNECTING TO THE NETWORK ENCODER Normally you would TEA 1 Launch the Internet browser 2 Type the IP address of the network encoder in the address bar ex IP address IPv4 192 168 1 100 gt http 192 168 1 100 the Login dialog should appear IP address IPv6 2001 0230 abcd ffff 0000 0000 ffff 1111 gt http 2001 230 abcdi ffff ffff 1111 the Login dialog should appear If the HTTP port is other than 80 1 Launch the Internet browser 2 Type the IP address and HTTP port number of the network encoder in the address bar ex IP address 192 168 1 100 HTTP Port number 8080 gt http 192 168 1 100 8080 the Login dialog should appear Using URL 1 Launch the Internet browser 2 Type the DDNS URL of the network encoder in the address bar ex URL address http Avww samsungipolis com Product ID the Login dialog should appear 34_ web viewer To check the DDNS address If the network encoder is connected directly to the DHCP cable modem DSL modem or PPPoE modem the IP address of your network will be changed each time you try to connect to the ISP Internet Service Provider server If this is the case you will not be informed of the IP address changed by DDNS Once you register a dynami
95. r use in the OpenSSL Toolkit http www openssl org 4 The names OpenSSL Toolkit and OpenSSL Project must not be used to endorse or promote products derived from this software without prior written permission For written permission please contact openss core openssl org 5 Products derived from this software may not be called OpenSSL nor may OpenSSL appear in their names without prior written permission of the OpenSSL Project 6 Redistributions of any form whatsoever must retain the following acknowledgment This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit http www openssl org THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT AS IS AND ANY EXPRESSED OR IMPLIED WARRANTIES CLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED O EVENT SHALL THE OpenSSL ROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT NCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING EGLIGENCE OR OTHERWISE ARISING N ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE This product includes cryptographic soft
96. ral Public License instead of this License to a given copy of the Library To do this you must alter all the notices that refer to this License so that they refer to the ordinary GNU General Public License version 2 instead of to this License If a newer version than version 2 of the ordinary GNU General Public License has appeared then you can specify that version instead if you wish Do not make any other change in these notices Once this change is made in a given copy it is irreversible for that copy so the ordinary GNU General Public License applies to all subsequent copies and derivative works made from that copy This option is useful when you wish to copy part of the code of the Library into a program that is not a library 4 You may copy and distribute the Library or a portion or derivative of it under Section 2 in object code or executable form under the terms of Sections 1 and 2 above provided t hat you accompany it with the complete corresponding machine readable source code which must be distributed under the terms of Sections 1 and 2 above ona medium customarily used for software interchange If distribution of object code is made by offering access to copy from a designated place then offering equivalent access to copy the source code from the same place satisfies the requirement to distribute the source code even though third parties are not compelled to copy the source along with the
97. rement to provide Installation Information does not include a requirement to continue to provide support service warranty or updates for a work that has been modified or installed by the recipient or for the User Product in which it has been modified or installed Access to a network may be denied when the modification itself materially and adversely affects the operation of the network or violates the rules and protocols for communication across the network Corresponding Source conveyed and Installation Information provided in accord with this section must be in a format that is publicly documented and with an implementation available to the public in source code form and must require no special password or key for unpacking reading or copying 7 Additional Terms Additional permissions are terms that supplement the terms of this License by making exceptions from one or more of its conditions Additional permissions that are applicable to the entire Program shall be treated as though they were included in this License to the extent that they are valid under applicable law If additional permissions apply only to part of the Program that part may be used separately under those permissions but the entire Program remains governed by this License without regard to the additional permissions When you convey a copy of a covered work you may at your option remove any additional permissions from that copy or fr
98. rotocols RTSP port Used to transfer videos in the RTSP mode the default is 554 Viewer port Used to transfer videos to the Web Viewer the default is 4520 The port range of the Viewer is between 4502 and 4534 If the VNP port is with this effective range the Viewer port should be specified the same as the VNP port Silverlight policy port Silverlight is used to permit to acquire a network connection the default is 943 You cannot change the Viewer Silverlight policy server port of a camera 4 When done click Apply HEZE 48_ setup screen DDNS DDNS is an abbreviation of Dynamic Domain Name Service that converts the IP address of a network encoder into a general Host Name so that the user can easily remember it 1 From the Setup menu select the lt Network E 5 tab 2 Click lt DDNS gt 3 Select lt DDNS gt 4 Type in the DDNS items according to the selected type e Samsung DDNS Select this if you use the DDNS server provided by Samsung Techwin e Public DDNS Select one of provided public DDNS servers when you use a public DDNS server Host name Enter the name of the host i e host name of Dyndns that is registered with the DDNS server User name Enter the user name for the DDNS service i e user ID that is regis tered with Dyndns Password Enter the password for the DDNS service i e password that is registered with Dyndns 5 When done click Apply HERA
99. t as expressly provided under this License Any attempt otherwise to copy modify sublicense link with or distribute the Library is void and will automatically erminate your rights under this License However parties who have received copies or rights from you under this License will not have their licenses erminated so long as such parties remain in full compliance 9 You are not required to accept this License since you have not signed it However nothing else grants you permission to modify or distribute the Library or its derivative works These actions are prohibited by law if you do not accept this License Therefore by modifying or distributing the Library or any work based on the Library you indicate your acceptance of this License to do so and all its terms and conditions for copying distributing or modifying the Library or works based on it 10 Each time you redistribute the Library or any work based on the Library he recipient automatically receives a license from the original licensor to copy distribute link with or modify he Library subject to these terms and conditions You may not impose any urther restrictions on the recipients exercise of the rights granted herein You are not responsible for enforcing compliance by third parties with this License 11 If as a consequence of a court judgment or allegation of patent infringement or for any other reason not limited to patent issues c
100. t all notices c You must license the entire work as a whole under this License to anyone who comes into possession of a copy This License will therefore apply along with any applicable section 7 additional terms o the whole of the work and all its parts regardless of how they are packaged This License gives no permission to license he work in any other way but it does not invalidate such permission if you have separately received it d If the work has interactive user interfaces each must display Appropriate Legal Notices however if the Program has interactive interfaces that do not display Appropriate Legal Notices your work need not make them do so A compilation of a covered work with other separate and independent works which are not by their nature extensions of the covered work and which are not combined with it such as to form a larger program in or on a volume of a storage or distribution medium is called an aggregate if the compilation and its resulting copyright are not used to limit the access or legal rights of the compilation s users beyond what the individual works permit Inclusion of a covered work in an aggregate does not cause this License to apply to the other parts of the aggregate 6 Conveying Non Source Forms You may convey a covered work in object code form under the terms of sections 4 and 5 provided that you also convey the machine readable Correspondi
101. t to reverse the polarity when you connect the power cable 18_ installation amp connection Connecting to Audio Input Output Microphone E gt Microphone Amp 1 Connect the AUDIO IN port of the network encoder with the microphone directly or LINE OUT port of the amplifier that the microphone is connected to 2 Connect the AUDIO OUT port of the network encoder with the LINE IN port of the speaker 3 Check the specifications for audio input Z Audio 1 0 can be performed only in channel 1 English _19 NOLLOANNOO 8 NOILVTIVLSNI installation amp connection Audio Codec G 711 PCM y law 64kbps 8kHz sampling Full duplex Audio Audio in Used for mono signal line input Max 2 4 Vpp Audio out Used for mono signal line output Max 2 4 Vpp Line out impedance 6000 Alarm I O Wiring Diagram GND 9 Jy J ALARM IN S1 10 a 12mA sink ALARM IN S2 11 12mA sink ALARM IN 53 12 Pa iy 12mA sink o re 13 12mA sink me L GND 14 ALARM OUT R1 15 NO 24VDC 1A 125VAC 0 5A MAX ALARMCOM1 16 o o ALARMOUTR2 17 NO 24VDC 1A 125VAC 0 5A MAX ALARMCOM2 18 Lo ALARMOUTRs 19 NO 24VDC 1A 125VAG 0 5A MAX ALARMCOM3 20 ko 5 ALARMOUTRA 2 NO 24VDC 1A 125VAG 0 5A MAX ALARM GOMA 22 ko oO For controlling the power with electrical contacts a separate circuit is required 20_ instal
102. therwise if the work is a derivative of the Library you may distribute the object code or the work under the terms of Section 6 Any executables containing that work also all under Section 6 whether or not they are inked directly with the Library itself 6 As an exception to the Sections above you may also combine or link a work that uses the Library with the Library to produce a work containing portions of the Library and distribute that work under terms of your choice provided that the terms permit modification of the work for the customer s own use and reverse engineering for debugging such modifications You must give prominent notice with each copy of the work that the Library is used in it and that the Library and its use are covered by this License You must supply a copy of this License If the work during execution displays copyright notices you must include the copyright notice for the Library among them as well as a reference directing the user to the copy of this License Also you must do one of these things a Accompany the work with the complete corresponding machine readable source code for the Library including whatever changes were used in the work which must be distributed under Sections 1 and 2 above and if the work is an executable linked with the Library with the complete machine readable work that uses the Library as object code and or source code so that the us
103. to Interface page 47 24 network connection and setup CONNECTING THE NETWORK ENCODER TO A BROADBAND ROUTER WITH THE PPPoE CABLE MODEM This is for a small network environment such as homes SOHO and ordinary shops _ Network Encoder L fa Cable Modem External Remote PC INTERNET PPPoE or Broadband Cable Modem Router Local PC dN13S ANY NOILOANNOS MHOMLAN DDNS Server Data Center KOREA Configuring the network settings of the local PC connected to a Broadband Router Configuring the network settings of the local PC connected to a Broadband Router follow the instructions below e Select lt Network Neighborhood gt gt lt Properties gt gt lt Local Area Connection gt gt lt Properties gt gt lt General gt gt lt Internet Protocol TCP IP gt gt lt Properties gt gt lt Obtain an IP address automatically gt or lt Use the following IP address gt e Follow the instructions below if you select lt Use the following IP address gt ex1 If the address LAN IP of the Broadband Router is 192 168 1 1 P address 192 168 1 100 Subnet Mask 255 255 255 0 Default Gateway 192 168 1 1 ex2 If the address LAN IP of the Broadband Router is 192 168 0 1 P address 192 168 0 100 ubnet Mask 255 255 255 0 efault Gateway 192 168 0 1 ex3 If the address LAN IP of the Broadband Router is 192 168 xxx 1 P address 192 168 xxx 100 Subnet Mask 255 255 255 0
104. to access the network encoder using the Internet browser defaulted to 80 Use the spin button to change the HTTP Port value e VNP Port Used to control the video signal transfer defaulted to 4520 5 Enter the password This is the login password for the admin user who accesses the network encoder The default password is 4321 28_ network connection and setup 6 Click OK Manual network setup will be completed 7 When the manual setup including IP is completed the network encoder will restart If the Broadband Router has more than one network encoder connected Configure the IP related settings and the Port related settings distinctly with each other Category CH1 CH2 CH3 CH4 IP related IP Address 192 168 1 100 192 168 1 101 192 168 1 102 192 168 1 103 sailinds Subnet Mask 255 255 255 0 255 255 255 0 255 255 255 0 265 255 255 0 g Gateway 192 168 1 1 192 168 1 1 192 168 1 1 192 168 1 1 Port related HTTP Port 8080 8081 8082 8083 settings VNP Port 4520 4521 4522 4523 E m If the lt HTTP Port gt is set other than 80 you must provide the lt Port gt number in the address bar of the Internet browser before you can access the network encoder ex http IP address HTTP Port http 192 168 1 100 8080 Auto Network Setup Run IP Installer vX XX exes to display the network encoder search list At the initial startup both Auto Set and Manual Set will be grayed out E
105. uarantee your freedom to share and change free software to make sure the software is free or all its users This license the Lesser General Public License applies to some specially designated software packages typically ibraries of the Free Software Foundation and other authors who decide to use it You can use it too but we suggest you first hink carefully about whether this license or he ordinary General Public License is the better strategy to use in any particular case based on the explanations below When we speak of free software we are referring to freedom of use not price Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software and charge for this service if you wish that you receive source code or can get it if you want it that you can change the software and use pieces of it in new free programs and that you are informed that you can do hese things To protect your rights we need to make restrictions that forbid distributors to deny you these rights or to ask you to surrender hese rights These restrictions translate o certain responsibilities for you if you distribute copies of the library or if you modify it For example if you distribute copies of he library whether gratis or for a fee you must give the recipients all the rights that we gave you You must make sure that they too receive or can get the source code If you link oth
106. uld also get your employer if you work as a programmerjor your school if any to sign a copyright disclaimer for the program if necessary Here is a sample alter the names Yoyodyne Inc hereby disclaims all copyright interest in the program Gnomovision which makes passes at compilers written by James Hacker signature of Ty Coon 1 April 1989 Ty Coon President of Vice This General Public License does not permit incorporating your program into proprietary programs If your program is a subroutine library you may consider it more useful to permit linking proprietary applications with the library If this is what you want to do use the GNU Lesser General Public License instead of this License GNU GENERAL PUBLIC LICENSE Version 3 29 June 2007 Copyright 2007 Free Software Foundation Inc lt htto fsf org gt Everyone is permitted to copy and distribute verbatim copies of this license document but changing it is not allowed Preamble The GNU General Public License is a free copyleft license for software and other kinds of works The licenses for most software and other practical works are designed to take away your freedom to share and change the works By contrast the GNU General Public License is intended to guarantee your freedom to share and change all versions of a program to make sure it remains free software for all its users We the Free Software Foundation use the GNU General Pu
107. us has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped English 3 M3IAHAAO overview WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS PROCUCT TO RAIN OR MOISTURE DO NOT INS ERT ANY METALLIC OBJECT THROUGH THE VENTILATION GRILLS OR OTHER OPENNINGS ON THE EQUIPMENT Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids such as vases shall be placed on the apparatus CAUTION AN RISK OF ELECTRIC SHOCK DO NOT OPEN A DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK REFER SERVICING TO QUALIFIED SERVICE PERSONNEL EXPLANATION OF GRAPHICAL SYMBOLS The lightning flash with arrowhead symbol equilateral triangle is intended to alert the presence of dangerous voltage within th enclosure that may be of sufficient magnit risk of electric shock to persons within an user to the e product s ude to constitute a The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the product 4_ overview Class I constructi
108. ve as window appears 2 Click Save The screenshot will be backed up to the specified path E f you are using the IE8 as the default web browser select Tools Internet Options Security and uncheck Use protected mode YAMGIA daM PLAYING THE BACKUP RECORDINGS You can play backup recordings by using the SlimPlayer To download SlimPlayer 1 Click SlimPlayer EJ You will see a download dialog where you can specify the download path 2 Specify the path with a proper file name and click Save 3 Unzip the downloaded file and run the executable English 43 setu o screen SETUP You can configure the audio amp video network event and system settings of the network encoder in the network 1 In the Live screen click Setup EE 2 The Setup screen appears AUDIO amp VIDEO SETUP Video profile 1 Frol amp Video E gt tab 2 Click lt Video profile gt 3 Se 4 Click the input box of each item and en e Default profile This is the default video profile e Fixed framerate profile Fix the frame rate of the selected profile regardless selected codec type m the Setup menu select the lt Audio lect a lt Video profile gt number er select a desired value he context menu may differ depending on the of the settings of other profiles e E mail FTP profile Video profile to be transferred to the specified email
109. ve to Network Interface and set the network type to DHCP Connect the network encoder which was removed from your PC directly to the modem NO oO f Ww 8 Restart the network encoder g For registering the DDNS settings refer to Registering with DDNS page 49 For configuring the DDNS settings refer to DDNS page 49 For setting the network type refer to Interface page 47 English 23 dNLAS ANY NOILOANNOS YHOML3IN network connection and setup CONNECTING THE NETWORK ENCODER DIRECTLY TO A PPPoE MODEM Sa Network Encoder PPPoE Modem External Remote PC DDNS Server Data Center KOREA 1 Use the cross LAN cable to connect the network cable directly to your PC 2 Run the IP Installer and change the IP address of the network encoder so that you can use the web browser on your desktop to connect to the Internet Use the Internet browser to connect to the network encoder Move to Setup page Move to Network DDNS and configure the DDNS settings Move to Network Interface and set the network type to PPPoE Connect the network encoder which was removed from your PC directly to the modem 8 Restart the network encoder NO Of Ww NG For registering the DDNS settings refer to Registering with DDNS page 49 For configuring the DDNS settings refer to DDNS page 49 For setting the network type refer
110. vered work knowingly relying on a patent license and the Corresponding Source of the work is not available for anyone to copy free of charge and under the terms of this License through a publicly available network server or other readily accessible means then you must either 1 cause the Corresponding Source to be so available or 2 arrange to deprive yourself of the benefit of the patent license for this particular work or 3 arrange in a manner consistent with the requirements of this License to extend the patent license to downstream recipients Knowingly relying means you have actual knowledge that but for the patent license your conveying the covered work in a country or your recipient s use of the covered work in a country would infringe one or more identifiable patents in that country that you have reason to believe are valid If pursuant to or in connection with a single transaction or arrangement you convey or propagate by procuring conveyance of a covered work and grant a patent license to some of the parties receiving the covered work authorizing them to use propagate modify or convey a specific copy of the covered work then the patent license you grant is automatically extended to all recipients of the covered work and works based on it A patent license is discriminatory if it does not include within the scope of its coverage prohibits the exercise of or is conditioned on the non exer
111. ware written by Eric Young eay cryptsoft com This product includes software written by Tim Hudson tjh cryptsoft com U Original SSLeay License Copyright C 1995 1998 Eric Young eay cryptsoft com All rights reserved This package is an SSL implementation written by Eric Young eay cryptsoft com The implementation was written so as to conform with Netscapes SSL This library is free for commercial and non commercial use as long as the following conditions are aheared to The following conditions apply to all code found in this distribution be it the RC4 RSA Ihash DES etc code not just the SSL code The SSL documentation included with this distribution is covered by the same copyright terms except that the holder is Tim Hudson tjh cryptsoft com Copyright remains Eric Young s and as such any Copyright notices in the code are not to be removed If this package is used in a product Eric Young should be given attribution as the author of the parts of the library used This can be in the form of a textual message at program startup or in documentation online or textual provided with the package Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met i Redistributions of source code must retain the copyright notice this list of conditions
112. y other system and a licensee cannot impose that choice This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License 12 If the distribution and or use of the Library is restricted in certain countries either by patents or by copyrighted interfaces the original copyright holder who places the Library under this License may add an explicit geographical distribution limitation excluding those countries so that distribution is permitted only in or among countries not thus excluded In such case this License incorporates the limitation as if written in the body of this License 13 The Free Software Foundation may publish revised and or new versions of the Lesser General Public License from time to time Such new versions will be similar in spirit to the present version but may differ in detail to address new problems or concerns Each version is given a distinguishing version number If the Library specifies aversion number of this License which applies to it and any later version you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation If the Library does not specify a license version number you may choose any version ever published by the Free Software Foundation 14 If you wish to incorporate parts of the Library into other free programs whose distribution conditi

Download Pdf Manuals

Related Search

SAMSUNG SPE 400 USER MANUAL

SAMSUNG SPE-400 USER MANUAL

Contents

Download Pdf Manuals

Related Search

Related Contents